[Manual] Connection TFT display ILI9341 (custom Dash)
Modest Polykarpovich last edited by Modest Polykarpovich
Hi all. Yesterday I've connected my TFT display (3.2" controller ILI9341 320x240) and Omega2. Look at the photo below.
I don't have Dash board, but I re-compiled firmware with drivers (kernel objects).
If someone else wants to do it, I post here my experience.
Let's see connection diagram below.
It's item named "LCD TFT 320x240 Graphic Color Touch Display ILI9341 Mega2560 Arduino Compatible" from AliExpress.
You must select the next components (via
make menuconfigto in-built firmware:
Then you have to append initial script (filename
files/08-fbtft-device) from Omega2 Dash Package repository
Or select the board Omega2 Dash in the same menu.
Or download and force upgrade firmware (filename omega2dash-vX.X.X-bXXX.bin) via util
sysupgradefrom repo.onioniot.com. DIDN'T TESTED!
See next useful links about it:
David Kerr last edited by
Hi @Modest-Polykarpovich ,
Great work and great description.
Lazar Demin administrators last edited by
@Modest-Polykarpovich great project!
@Modest-Polykarpovich said in [Manual] Connection TFT display ILI9341 (custom Dash):
Or download and force upgrade firmware (filename omega2dash-vX.X.X-bXXX.bin) via util sysupgrade from repo.onioniot.com. DIDN'T TESTED!
This should work assuming your TFT <-> Omega connections are the same as the Dash