Help for implementation for Lora package sniffer with Onion Omega2 and Bosch Parking Sensor
-
Hello community of Onion Omega2,
We want to make an implementation for Lora package sniffer (or LoRa gateway) in order to communicate with a Bosch Parking Sensor that uses class A Lorawan protocol. Do you have any insight? So far we couldn't manage to find a solution to this problem... even adapting other solutions has been a nightmare so far.... Even the tiniest bit of help is more than welcome!
Thanks in advance!
-
@Ioannis OpenWrt has a Lora gateway package https://github.com/xueliu/lora-feed
-
Thank you very much @crispyoz!
-
@crispyoz thanks a lot for the advice but we want to make something like low cost node receiver package. We have a chip (RF96 or similar) and we want a solution that receive message from bosh parking sensor. Do you have any insight for this?
Thanks a lot in advance!
-
@Ioannis post a datasheet so members can take a look and maybe give you some direction. I think the last Bosch device I used was a spark plug in my 1967 Morris Mini, but I am sure the RF96 is not dissimilar. At the end of the day it is just code, so once we can see a datasheet a design or solution usually becomes evident.
As a wise man once said, software development is all about 1's and 0's, the challenge is to get them in the correct order.
-
Please check this link:
https://www.pocketmagic.net/dragino-lg01-lorawan-gateway/
But im not sure one channel gateway would be efficient for car parking sensor application.
-
@crispyoz the link for datasheet of parking sensor :https://www.bosch-connectivity.com/media/product_detail_pls/parking_lot_sensor_pls_datasheet_2020_12_04_en.pdf
-
@Ioannis this thread may be of use to you:
https://community.onion.io/topic/2982/omega2-as-a-lorawan-node?_=1625750014313
The data sheet doesn't tell us a whole lot, have you contacted their support email address and asked them to provide further details?
