1. Home
  2. Omega Talk
  3. Static IP set, but no internet access?

Static IP set, but no internet access?

  • J

    I set a static IP address for my Onion2+. Once I do that, I seem to no longer have internet access.
    Local wireless router is 192.168.1.1
    Static IP needed for the Onion is 192.168.1.202

    Somehow, I seem to have set this up wrong. Any help appreciated !

    ifconfig and /etc/config/network shown below

    root@Omega-5F4C:~# ifconfig
    apcli0 Link encap:Ethernet HWaddr 40:A3:6B:C9:5F:4E
    inet addr:192.168.1.202 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::42a3:6bff:fec9:5f4e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    br-wlan Link encap:Ethernet HWaddr 40:A3:6B:C9:5F:4C
    inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
    inet6 addr: fe80::42a3:6bff:fec9:5f4c/64 Scope:Link
    inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:932 errors:0 dropped:0 overruns:0 frame:0
    TX packets:587 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:134785 (131.6 KiB) TX bytes:57535 (56.1 KiB)

    eth0 Link encap:Ethernet HWaddr 40:A3:6B:C9:5F:4D
    inet6 addr: fe80::42a3:6bff:fec9:5f4d/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:17583 (17.1 KiB)
    Interrupt:5

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:10 errors:0 dropped:0 overruns:0 frame:0
    TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:640 (640.0 B) TX bytes:640 (640.0 B)

    ra0 Link encap:Ethernet HWaddr 40:A3:6B:C9:5F:4C
    inet6 addr: fe80::42a3:6bff:fec9:5f4c/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1033 errors:0 dropped:0 overruns:0 frame:0
    TX packets:576 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:169323 (165.3 KiB) TX bytes:47803 (46.6 KiB)
    Interrupt:6

    here is my /etc/config/network

    config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

    config globals 'globals'
    option ula_prefix 'fd1d:48c4:7633::/48'

    config interface 'wlan'
    option type 'bridge'
    option proto 'static'
    option hostname'MSPPlaner'
    option netmask '255.255.255.0'
    option ip6assign '60'
    option ipaddr '192.168.3.1'
    option dns-nameservers '75.75.75.75'

    config interface 'wwan'
    option ifname 'apcli0'
    option proto 'static'
    option ipaddr '192.168.1.202'
    option netmask '255.255.255.0'
    option hostname 'PVPlaner

    config interface 'wan'
    option ifname 'eth0'
    option proto 'dhcp'

    0
  • C

    @Jim-W It looks ok to me, so I wonder if the issue is your DNS. Can you ping 8.8.8.8 and 8.8.4.4 ?

    If receive a response then this is s DNS setup issue. When you use a static IP your're not using DHCP protocol which not only provides your IP but also provides your DNS configuration. Edit /etc/resolv.conf and add your DNS configuration here. If you're not sure which DNS to use you can use Google's which are the IPs I asked you to ping above. Like so:

    Interface wwan

    nameserver 8.8.8.8
    nameserver 8.8.4.4
    search localdomain

    0 J 1 Reply
  • J

    @crispyoz

    root@Omega-5F4C:~# ping 8.8.8.8
    PING 8.8.8.8 (8.8.8.8): 56 data bytes
    ping: sendto: Network unreachable
    root@Omega-5F4C:~#

    Strange. I edited the resolv.conf to be

    nameserver 8.8.8.8
    nameserver 8.8.4.4
    search local domain

    and saved it. Just to check I did a cat /etc/resolv.conf and is came back correctly.

    I rebooted the machine. Still wont ping. Checked resolv.conf and is has been changed back to its original

    search lan
    nameserver 127.0.0.1

    ??
    Still cannot ping 8.8.8.8
    Looks like something is overwriting resolv.conf at reboot?

    0
  • C

    @Jim-W The resolv.conf being overwitten will be caused by dnsmasq but if you can't ping then that is the issue that need to be sorted.

    Can you ping 192.168.1.1 ?

    Please post /etc/config/wireless and the output of route -e

    0 J 1 Reply
  • J

    @crispyoz

    Could not ping 192.168.1.1
    However, found a solution in post Setting DNS with static IP config (not sure how I missed it in my initial search).

    Changes wwan to

    config interface 'wwan'
    option ifname 'apcli0'
    option proto 'static'
    option hostname 'Omega-XXXX'
    option ipaddr '192.168.1.202'
    option netmask '255.255.255.0'
    option gateway '192.168.1.1'
    option dns '8.8.8.8'

    and added a line to rc.local

    route add default gw 192.168.1.1

    That seemed to do the trick. I can ping the www (and more importantly the ntp server I needed to get the time from).

    Thank you for your assistance

    0
  • C

    @Jim-W The configuration changes you show are correct, personally I prefer to place them in the wireless config but either is fine. Adding the route to rc.local is not required.

    0
internet 16 static ip 5
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.