Hello,

I am using an omega onion pro 2 and have all the installed firmware and relevant software loaded. I want to copy this image and flash to 'freeze it in time'.

I read through https://docs.onion.io/omega2-docs/manual-firmware-installation.html, but I want to flash the image onto the internal memory of the Omega Onion board using a USB ideally.

Any suggestions?

Thank you!

Hello,

I am attempting to characterize the issue I am facing with mjpg-streamer.

It seems that jitter occurs after some time of use.

I feel like mjpg-streamer has been updated and not the same exact install on my previous omega onion pro 2 board.

Any suggestions to what maybe causing the jitter and how to solve this?

Thank you!

Hello,

Is there a python command that is equivalent to the terminal command:

omega2-ctrl gpiomux set uart1 gpio

Thank you!

Hello,

I am trying to write a python script that can turn on an LED using pin 46 on the GPIO header.

I am trying the following without success.

gpio46 = onionGpio.OnionGpio(46)
gpio46.setOutputDirection(0)
gpio46.setValue(1)

Thank you!

@crispyoz I edited the /etc/config/network. but it makes the text in the /config/wireless and network go blank. I changed wwlan and wlan, both to wlan0. For some reason, I never have success editing network/wireless settings from these two text files.

Do you know of any other way?

Thank you so much!

Thank you so much.

Hello,

Is it possible to set wireless.ap.network from wlan to wlan0 on the onion omega pro 2? I tried to edit vi /etc/config/wireless without success.

Thank you!

Hello,

I a trying to disable the wifi-ethernet bridge and only have wifi. In other words I am trying to remove the br in br-wlan such that I can have an wlan0 inet address.

Otherwise, is there a way to find the wlan0 inet address?

Thank you!