Best posts made by DocHardinger

@Lazar-Demin yes. Ok then we will build an ethernet adapter because omega is already fixed on our boards but ethernet pins are accessible.

Hi,

what kind of software are you using for an lte modem? Especially on the Omega2 LTE version? We tried Modemmanager and uqmi but didnt get a stable connection. We are using the omega2 pro as an travel router and sometimes its loosing its connection to the modem and never get connected again, than we have to restart the interface manually, most of the times this helps. And sometimes is completly lost an we have to restart the omega. Were using OpenWrt 22.03.05. Modem is a Quectel Ep06. So the question is what kind of software is used on the original omega2 lte?

Greetz Doc

@Lazar-Demin

Thats really great news! Will the new firmware (22.03.xx) also work with the omega2-lte? Or are there any restrictions because of the modem?

@Lazar-Demin perfect i will try this

Great work! Really love it
Now that hardware pwm is possible using command line, will there be an easy way to use pwm. Before it was possible to use

onion pwm <CHANNEL> <DUTY CYCLE> <FREQUENCY>

or should we write a python module which uses the documented command line methods?

Thx again for the great work

@Lazar-Demin
the main use is to communicate with an Analog digital converter. And many python libraries are using spidev so i think it makes sense to make this working again. Anyway if there is an alternative its also ok, but for now i didnt found a working solution in python3.

I also tried to use spi-tools for testing the spi connection and there also seems to be some errors. But i will do some further tests later and give some feedback.

Hi,

is there a way to use software emulated pwm in OpenWrt 22.03. with an Omega2+?
I know its possible in 18.06. but since 21.X OpenWrt removed the w1_gpio_custom package.

Any ideas?

@Lazar-Demin

I found this post https://community.onion.io/post/25025 and added these patches to your firmware builder for openwrt 22.03. Build and flashing was successful but not tested it yet.

Dont know but maybe it helps you in your open issues. Especially for gpio mapping.