Community

Gene Liverman

I have tried every variation of method I can find online and can't disable the AP on my Omega2. I am running the b159 firmware. I have tried lots of manual edits to /etc/config/wireless and tried via the web console. The console doesn't have any kind of save button on the screen where you uncheck the box for Enable AP Mode so it never seems to take. Please help!

Gene Liverman

So... to get mine to connect I had to create a new SSID that ONLY provides 2.4GHz. My normal one does both 2.4 ad 5 on the same SSID which seems to confuse the Omega2.

Gene Liverman

@WereCatf I'll give your network config a try this weekend, thanks!

Gene Liverman

@Zogg-Baubas I upgraded mine by using the serial console over USB. To do this, install the driver from and follow the directions on https://wiki.onion.io/Tutorials/Connecting-to-Omega-via-Serial-Terminal then do the steps below per http://community.onion.io/topic/1154/omega-2-usb-firmware-install-after-brick-resolved/2

Download firmware file to USB flash drive
Rename the file to Omega2.bin (this works for both Omega2 & Omega 2+)
Connect PC to Omega 2 via device supporting USB to serial connectivity.
Hold the reset button down and power on the omega.
Select option #2, install firmware from USB.

Gene Liverman

No luck with this one either. I tried the "fix" in the other thread in /etc/config/wireless but it didn't work either. Below is what I see whey I tell wifimanager to do its thing:

root@Omega-95D3:/# wifimanager -v
radio0 is up
Reading configured networks in station mode...
"10th-Tardis"

Scanning nearby networks...
found"10th-Tardis"
"The-Companion"
""
""
"ATTXB4TnQs"



Current Count: 1
Number of configured nets: 1
trying to connect to... "10th-Tardis"
[  350.930646] br-wlan: port 2(ra0) entered disabled state
[  351.375425] EEPROM:Read from [factory] offset 0x0,length 0x400.
[  353.849016]  ch1 bssid=a0:63:91:d6:11:20
[  353.853017]  ch6 bssid=f6:f2:6d:70:58:55
[  353.856996]  ch6 bssid=f4:f2:6d:70:58:55
[  353.861008]  ch6 bssid=f2:f2:6d:70:58:55
[  353.865028]  ch11 bssid=cc:65:ad:ef:76:60
[  353.869126]  ch11 bssid=8c:7f:3b:4a:76:70
[  353.873190] =====================================================
[  353.879388] Channel 1 : Dirty = 70, False CCA = 0, Busy Time = 2675, Skip Channel = FALSE
[  353.887678] Channel 2 : Dirty = 92, False CCA = 0, Busy Time = 915, Skip Channel = FALSE
[  353.895898] Channel 3 : Dirty = 100, False CCA = 0, Busy Time = 98, Skip Channel = FALSE
[  353.904119] Channel 4 : Dirty = 108, False CCA = 0, Busy Time = 1363, Skip Channel = FALSE
[  353.912516] Channel 5 : Dirty = 116, False CCA = 0, Busy Time = 3800, Skip Channel = FALSE
[  353.920913] Channel 6 : Dirty = 240, False CCA = 0, Busy Time = 5577, Skip Channel = FALSE
[  353.929325] Channel 7 : Dirty = 136, False CCA = 0, Busy Time = 3398, Skip Channel = FALSE
[  353.937704] Channel 8 : Dirty = 132, False CCA = 0, Busy Time = 463, Skip Channel = FALSE
[  353.946014] Channel 9 : Dirty = 128, False CCA = 0, Busy Time = 847, Skip Channel = FALSE
[  353.954323] Channel 10 : Dirty = 124, False CCA = 0, Busy Time = 8338, Skip Channel = FALSE
[  353.962808] Channel 11 : Dirty = 140, False CCA = 0, Busy Time = 5301, Skip Channel = FALSE
[  353.971287] =====================================================
[  353.977468] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
[  353.986210] Min Dirty = 70
[  353.988953] ExChannel = 0 , 0
[  353.991977] BW        = 20
[  354.021307] br-wlan: port 2(ra0) entered forwarding state
[  354.026832] br-wlan: port 2(ra0) entered forwarding state
[  356.019017] br-wlan: port 2(ra0) entered forwarding state
[  359.425598] !!! APCLI LINK UP - IF(apcli0) AuthMode(7)=WPA2PSK, WepStatus(6)=AES!
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
ran out of configured networks... no station available
[  383.899088] br-wlan: port 2(ra0) entered disabled state
[  384.085441] !!! APCLI LINK DOWN - IF(apcli0)!!!
[  384.949351] EEPROM:Read from [factory] offset 0x0,length 0x400.
Current Count: 1
Number of configured nets: 1
trying to connect to... "10th-Tardis"
[  350.930646] br-wlan: port 2(ra0) entered disabled state
[  351.375425] EEPROM:Read from [factory] offset 0x0,length 0x400.
[  353.849016]  ch1 bssid=a0:63:91:d6:11:20
[  353.853017]  ch6 bssid=f6:f2:6d:70:58:55
[  353.856996]  ch6 bssid=f4:f2:6d:70:58:55
[  353.861008]  ch6 bssid=f2:f2:6d:70:58:55
[  353.865028]  ch11 bssid=cc:65:ad:ef:76:60
[  353.869126]  ch11 bssid=8c:7f:3b:4a:76:70
[  353.873190] =====================================================
[  353.879388] Channel 1 : Dirty = 70, False CCA = 0, Busy Time = 2675, Skip Channel = FALSE
[  353.887678] Channel 2 : Dirty = 92, False CCA = 0, Busy Time = 915, Skip Channel = FALSE
[  353.895898] Channel 3 : Dirty = 100, False CCA = 0, Busy Time = 98, Skip Channel = FALSE
[  353.904119] Channel 4 : Dirty = 108, False CCA = 0, Busy Time = 1363, Skip Channel = FALSE
[  353.912516] Channel 5 : Dirty = 116, False CCA = 0, Busy Time = 3800, Skip Channel = FALSE
[  353.920913] Channel 6 : Dirty = 240, False CCA = 0, Busy Time = 5577, Skip Channel = FALSE
[  353.929325] Channel 7 : Dirty = 136, False CCA = 0, Busy Time = 3398, Skip Channel = FALSE
[  353.937704] Channel 8 : Dirty = 132, False CCA = 0, Busy Time = 463, Skip Channel = FALSE
[  353.946014] Channel 9 : Dirty = 128, False CCA = 0, Busy Time = 847, Skip Channel = FALSE
[  353.954323] Channel 10 : Dirty = 124, False CCA = 0, Busy Time = 8338, Skip Channel = FALSE
[  353.962808] Channel 11 : Dirty = 140, False CCA = 0, Busy Time = 5301, Skip Channel = FALSE
[  353.971287] =====================================================
[  353.977468] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
[  353.986210] Min Dirty = 70
[  353.988953] ExChannel = 0 , 0
[  353.991977] BW        = 20
[  354.021307] br-wlan: port 2(ra0) entered forwarding state
[  354.026832] br-wlan: port 2(ra0) entered forwarding state
[  356.019017] br-wlan: port 2(ra0) entered forwarding state
[  359.425598] !!! APCLI LINK UP - IF(apcli0) AuthMode(7)=WPA2PSK, WepStatus(6)=AES!
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
ran out of configured networks... no station available
[  383.899088] br-wlan: port 2(ra0) entered disabled state
[  384.085441] !!! APCLI LINK DOWN - IF(apcli0)!!!
[  384.949351] EEPROM:Read from [factory] offset 0x0,length 0x400.
[  387.419016]  ch1 bssid=a0:63:91:d6:11:20
[  387.423017]  ch6 bssid=f4:f2:6d:70:58:55
[  387.426995]  ch6 bssid=f6:f2:6d:70:58:55
[  387.431007]  ch6 bssid=f2:f2:6d:70:58:55
[  387.434988]  ch11 bssid=8c:7f:3b:4a:76:70
[  387.439086]  ch11 bssid=d4:04:cd:76:80:60
[  387.443153]  ch11 bssid=40:c7:29:49:7b:ca
[  387.447215] =====================================================
[  387.453415] Channel 1 : Dirty = 70, False CCA = 0, Busy Time = 2070, Skip Channel = FALSE
[  387.461731] Channel 2 : Dirty = 92, False CCA = 0, Busy Time = 69, Skip Channel = FALSE
[  387.469864] Channel 3 : Dirty = 100, False CCA = 0, Busy Time = 3639, Skip Channel = FALSE
[  387.478242] Channel 4 : Dirty = 108, False CCA = 0, Busy Time = 3064, Skip Channel = FALSE
[  387.486638] Channel 5 : Dirty = 116, False CCA = 0, Busy Time = 2248, Skip Channel = FALSE
[  387.495034] Channel 6 : Dirty = 240, False CCA = 0, Busy Time = 2436, Skip Channel = FALSE
[  387.503431] Channel 7 : Dirty = 156, False CCA = 0, Busy Time = 2168, Skip Channel = FALSE
[  387.511827] Channel 8 : Dirty = 156, False CCA = 0, Busy Time = 983, Skip Channel = FALSE
[  387.520136] Channel 9 : Dirty = 156, False CCA = 0, Busy Time = 1013, Skip Channel = FALSE
[  387.528515] Channel 10 : Dirty = 156, False CCA = 0, Busy Time = 12105, Skip Channel = FALSE
[  387.537086] Channel 11 : Dirty = 210, False CCA = 0, Busy Time = 10746, Skip Channel = FALSE
[  387.545654] =====================================================
[  387.551850] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
[  387.560592] Min Dirty = 70
[  387.563336] ExChannel = 0 , 0
[  387.566342] BW        = 20
[  387.595604] br-wlan: port 2(ra0) entered forwarding state
[  387.601192] br-wlan: port 2(ra0) entered forwarding state
Wifi manager finished
root@Omega-95D3:/# [  389.598987] br-wlan: port 2(ra0) entered forwarding state
[  354.021307] br-wlan: port 2(ra0) entered forwarding state
[  354.026832] br-wlan: port 2(ra0) entered forwarding state
[  356.019017] br-wlan: port 2(ra0) entered forwarding state
[  359.425598] !!! APCLI LINK UP - IF(apcli0) AuthMode(7)=WPA2PSK, WepStatus(6)=AES!
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
wwan network is set up... false,
ran out of configured networks... no station available
[  383.899088] br-wlan: port 2(ra0) entered disabled state
[  384.085441] !!! APCLI LINK DOWN - IF(apcli0)!!!
[  384.949351] EEPROM:Read from [factory] offset 0x0,length 0x400.
[  387.419016]  ch1 bssid=a0:63:91:d6:11:20
[  387.423017]  ch6 bssid=f4:f2:6d:70:58:55
[  387.426995]  ch6 bssid=f6:f2:6d:70:58:55
[  387.431007]  ch6 bssid=f2:f2:6d:70:58:55
[  387.434988]  ch11 bssid=8c:7f:3b:4a:76:70
[  387.439086]  ch11 bssid=d4:04:cd:76:80:60
[  387.443153]  ch11 bssid=40:c7:29:49:7b:ca
[  387.447215] =====================================================
[  387.453415] Channel 1 : Dirty = 70, False CCA = 0, Busy Time = 2070, Skip Channel = FALSE
[  387.461731] Channel 2 : Dirty = 92, False CCA = 0, Busy Time = 69, Skip Channel = FALSE
[  387.469864] Channel 3 : Dirty = 100, False CCA = 0, Busy Time = 3639, Skip Channel = FALSE
[  387.478242] Channel 4 : Dirty = 108, False CCA = 0, Busy Time = 3064, Skip Channel = FALSE
[  387.486638] Channel 5 : Dirty = 116, False CCA = 0, Busy Time = 2248, Skip Channel = FALSE
[  387.495034] Channel 6 : Dirty = 240, False CCA = 0, Busy Time = 2436, Skip Channel = FALSE
[  387.503431] Channel 7 : Dirty = 156, False CCA = 0, Busy Time = 2168, Skip Channel = FALSE
[  387.511827] Channel 8 : Dirty = 156, False CCA = 0, Busy Time = 983, Skip Channel = FALSE
[  387.520136] Channel 9 : Dirty = 156, False CCA = 0, Busy Time = 1013, Skip Channel = FALSE
[  387.528515] Channel 10 : Dirty = 156, False CCA = 0, Busy Time = 12105, Skip Channel = FALSE
[  387.537086] Channel 11 : Dirty = 210, False CCA = 0, Busy Time = 10746, Skip Channel = FALSE
[  387.545654] =====================================================
[  387.551850] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
[  387.560592] Min Dirty = 70
[  387.563336] ExChannel = 0 , 0
[  387.566342] BW        = 20
[  387.595604] br-wlan: port 2(ra0) entered forwarding state
[  387.601192] br-wlan: port 2(ra0) entered forwarding state
Wifi manager finished
root@Omega-95D3:/# [  389.598987] br-wlan: port 2(ra0) entered forwarding state
root@Omega-95D3:/#

Gene Liverman

I have now updated the firmware on the plus via usb serial to 0.1.7-b140 and tried it with and without the fw rule changes, no luck. Trying the non-plus model now.

Gene Liverman

@Zogg-Baubas No change... any other ideas?

Gene Liverman

@Zogg-Baubas I took a look at the file and it looks as though everything is already enabled (contents below). Can you be more specific about what I should try?

root@Omega-7547:~# cat /etc/config/firewall

config defaults
	option syn_flood '1'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'REJECT'
	option disable_ipv6 '1'

config zone
	option name 'lan'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'ACCEPT'
	option network 'wlan'

config zone
	option name 'wan'
	option output 'ACCEPT'
	option forward 'REJECT'
	option masq '1'
	option mtu_fix '1'
	option network 'wwan'
	option input 'ACCEPT'

config forwarding
	option src 'lan'
	option dest 'wan'

config rule
	option name 'Allow-DHCP-Renew'
	option src 'wan'
	option proto 'udp'
	option dest_port '68'
	option target 'ACCEPT'
	option family 'ipv4'

config rule
	option name 'Allow-Ping'
	option src 'wan'
	option proto 'icmp'
	option icmp_type 'echo-request'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-IGMP'
	option src 'wan'
	option proto 'igmp'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-DHCPv6'
	option src 'wan'
	option proto 'udp'
	option src_ip 'fc00::/6'
	option dest_ip 'fc00::/6'
	option dest_port '546'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-MLD'
	option src 'wan'
	option proto 'icmp'
	option src_ip 'fe80::/10'
	list icmp_type '130/0'
	list icmp_type '131/0'
	list icmp_type '132/0'
	list icmp_type '143/0'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Input'
	option src 'wan'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	list icmp_type 'router-solicitation'
	list icmp_type 'neighbour-solicitation'
	list icmp_type 'router-advertisement'
	list icmp_type 'neighbour-advertisement'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Forward'
	option src 'wan'
	option dest '*'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config include
	option path '/etc/firewall.user'

config rule
	option src 'wan'
	option dest 'lan'
	option proto 'esp'
	option target 'ACCEPT'

config rule
	option src 'wan'
	option dest 'lan'
	option dest_port '500'
	option proto 'udp'
	option target 'ACCEPT'

Gene Liverman

Will do. FWIW, I have also just finished trying on my second unit. The first is a Omega2+ and this one is the regular Omega2. Both are running firmware 0.1.5 b130.

Gene Liverman

Just had a thought... during first boot it didn't do any of the blinky stuff the guide talks about. The red light came on for a few seconds and then went off. The amber one is on without blinking from the get-go.

Gene Liverman

I am having the same issue. I am using WPA2/AES and have also tried connecting using both the web and the cli. The only thing "special" about my home wifi is it's a DD-WRT setup that has both 2.4GHz and 5GHz on the same SSID. I am well versed in the Linux CLI so I am happy to try anything you want to resolve it.

Posts made by Gene Liverman