Posts made by Igor Moura

That's actually a feature from OpenWRT (not strictly to the Omega itself) to save space on embedded devices, since most of them won't have the luxury to spend precious space with a list of packages that's not-so-often used

@None-None You can connect through a serial connection, edit the /etc/config/wireless file to enable your connection on that list (change the option disabled from 1 to 0) and run the wifi command, that way you will have a network connection until you reboot (that's enough to update the packages and get all running for sure)

@Michael-Vowles I was using Linux's own ssh, but after updating NetworkManager as @Lazar-Demin said, it worked (I also don't have to manually enable my wifi anymore)

SSH doesn't seem to work anymore after de upgrade, the connection instantly drops

┌─[igor][DeWitt][~]
└─▪ ssh root@onionomega
root@onionomega's password: 
Connection to onionomega closed.

@Lazar-Demin worked fine, thanks

Hello guys

After updating my omega to 0.0.8 I can't connect to my wireless network anymore.

That's the output of wifisetup:

root@Omega-0AAD:/# wifisetup 
Onion Omega Wifi Setup

Select from the following:
1) Scan for Wifi networks
2) Type network info
q) Exit

Selection: 1
Scanning for wifi networks...
Command failed: Not found
Failed to parse message data
WARNING: Variable 'results' does not exist or is not an array/object
> ERROR: Scan failed, try again

> ERROR: specified ssid not in the database

Here is the output of uci show wireless | grep disabled

root@Omega-0AAD:/# uci show wireless | grep disabled
wireless.radio0.disabled='0'
wireless.@wifi-iface[0].disabled='1'

When I try to change the value from 1 to 0 and reboot, it goes back to 1.

Any ideas?

@Matt-Ogborne looks like we are in the same situation.

The only thing I could do for now was to load the modules manually (git clone or use npm in another device, then copy the downloaded folder to the omega).

Hey folks,
After updating my onion and installing node/npm, I can't install anything using npm, all it does is throw me the following error:

npm ERR! Linux 3.18.27
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "install" "-g" "npm@latest"
npm ERR! node v4.3.1
npm ERR! npm  v2.14.12
npm ERR! code ENOTFOUND
npm ERR! errno ENOTFOUND
npm ERR! syscall getaddrinfo

npm ERR! network getaddrinfo ENOTFOUND registry.npmjs.org registry.npmjs.org:443
npm ERR! network This is most likely not a problem with npm itself
npm ERR! network and is related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly.  See: 'npm help config'

npm ERR! Please include the following file with any support request:
npm ERR!     /root/npm-debug.log

It's worth saying that I don't have a proxy and I'm able to ping/curl without problems.
Any ideas?