Posts made by Iker

@Michael-westberg I know that you're not accusing just felt I should apologise. By the way, if you wait till the free download count goes to 0 and then click, you won't get any .exe.

I agree with @WereCatf that should be something firewall related. On the Onion2+ my config, the one that he's using now is

config defaults
	option syn_flood	1
	option input		ACCEPT
	option output		ACCEPT
	option forward		REJECT
# Uncomment this line to disable ipv6 rules
#	option disable_ipv6	1

config zone
	option name		lan
	list   network		'lan wwan'
	option input		ACCEPT
	option output		ACCEPT
	option forward		ACCEPT
	option network 		'lan wwan'

config zone
	option name		wan
	list   network		'wan'
	list   network		'wan6'
	option input		REJECT
	option output		ACCEPT
	option forward		REJECT
	option masq		1
	option mtu_fix		1

config forwarding
	option src		lan
	option dest		wan

# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
	option name		Allow-DHCP-Renew
	option src		wan
	option proto		udp
	option dest_port	68
	option target		ACCEPT
	option family		ipv4

# Allow IPv4 ping
config rule
	option name		Allow-Ping
	option src		wan
	option proto		icmp
	option icmp_type	echo-request
	option family		ipv4
	option target		ACCEPT

config rule
	option name		Allow-IGMP
	option src		wan
	option proto		igmp
	option family		ipv4
	option target		ACCEPT

# Allow DHCPv6 replies
# see https://dev.openwrt.org/ticket/10381
config rule
	option name		Allow-DHCPv6
	option src		wan
	option proto		udp
	option src_ip		fc00::/6
	option dest_ip		fc00::/6
	option dest_port	546
	option family		ipv6
	option target		ACCEPT

config rule
	option name		Allow-MLD
	option src		wan
	option proto		icmp
	option src_ip		fe80::/10
	list icmp_type		'130/0'
	list icmp_type		'131/0'
	list icmp_type		'132/0'
	list icmp_type		'143/0'
	option family		ipv6
	option target		ACCEPT

# Allow essential incoming IPv6 ICMP traffic
config rule
	option name		Allow-ICMPv6-Input
	option src		wan
	option proto	icmp
	list icmp_type		echo-request
	list icmp_type		echo-reply
	list icmp_type		destination-unreachable
	list icmp_type		packet-too-big
	list icmp_type		time-exceeded
	list icmp_type		bad-header
	list icmp_type		unknown-header-type
	list icmp_type		router-solicitation
	list icmp_type		neighbour-solicitation
	list icmp_type		router-advertisement
	list icmp_type		neighbour-advertisement
	option limit		1000/sec
	option family		ipv6
	option target		ACCEPT

# Allow essential forwarded IPv6 ICMP traffic
config rule
	option name		Allow-ICMPv6-Forward
	option src		wan
	option dest		*
	option proto		icmp
	list icmp_type		echo-request
	list icmp_type		echo-reply
	list icmp_type		destination-unreachable
	list icmp_type		packet-too-big
	list icmp_type		time-exceeded
	list icmp_type		bad-header
	list icmp_type		unknown-header-type
	option limit		1000/sec
	option family		ipv6
	option target		ACCEPT

# include a file with users custom iptables rules
config include
	option path /etc/firewall.user

# allow IPsec/ESP and ISAKMP passthrough
config rule
	option src		wan
	option dest		lan
	option proto		esp
	option target		ACCEPT

config rule
	option src		wan
	option dest		lan
	option dest_port	500
	option proto		udp
	option target		ACCEPT

There's a reject on wan interface, but that shouldn't affect as the one being used is wwan, correct? Still learning.

I feel really sorry. Some days ago I think on another post, someone reported zippyshare (what I used for casual file sharing) as being blocked by the browser, that's why I changed this time to this service I had never used before.

I feel really ashamed, please don't think I'm trying to spread any kind of virus. However, I tried to donwload the file and just got the file. Anyway, I'll start a repo or something and host everything there.

Hi @michael-westberg

At first sight I can see that you have some differences on your firewall config, but you also define different networks that I don't have. If you want you can make a backup of your files and I upload my config files in a two-three hours. Then you can use mines, just changing SSID and key to check if it works.

Excuse me for not being so helpful but I'm not really good at networks.

Edit: if anyone else wants to use it, will be available for 30 days. If deleted, ask me for it. Probably should create a repo when playing more with the Omega2+

https://ufile.io/b90db

Hi @michael-westberg let's see if we're able to make it work.

First edit /etc/config/wireless. Don't change/delete anything, just add this

config wifi-iface
    option device 'radio0'
    option network 'wwan'
    option mode 'sta'
    option ssid 'myssid'
    option encryption 'psk2'
    option key 'mykey'
    option disabled '0'

Now be sure that you have this, or add it, to /etc/config/network:

config interface 'wwan'
        option proto 'dhcp'

Finally, add this to /etc/config/firewall:

config zone
        option name 'lan'
        option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'ACCEPT'
        option network 'lan wwan'

That's weird. Not dropbox, you can try this: http://s000.tinyupload.com/index.php?file_id=09478120683601055815

Or I'll see tomorrow how to get a public link from my owncloud.

Hi @Luciano-S I would be more confident on @WereCatf image, for sure, but here is mine for the Omega2+ if you wanna try http://www74.zippyshare.com/v/v8arpumN/file.html

Both fast-gpio and omega2-ctrl working. I installed nano, as I prefer it to vim. I can guide you through wifi setting if you test the image.

Hi @Matthew-Strenk check my answers here: https://community.onion.io/topic/1478/newbie-added-files-vanish-pkg-installs-vanish/12

Hi @Marty-Mickelson

Which firmware are you using? It seems odd to me being a different path for the LED, I should check mine.

Don't panic about the files not being persistent, it happened the same to me. Download latest* firmware following this:https://docs.onion.io/omega2-docs/manual-firmware-installation.html

Update with the -n flag.

*For the latest firmware neither omega2-ctrl nor fast-gpio are working, take that into account. If you want that, a mid-december version has that enable but I can't remember which.

Hi @Marty-Mickelson

Even if the LED keeps blinking, you should be able to access the board. Type this:

cat /sys/class/leds/onion\:amber\:system/trigger

You should get an output like this:

none mmc0 timer [default-on] netdev transient gpio heartbeat morse oneshot

But probably it's [timer] the option selected. If so, just type:

echo default-on > /sys/class/leds/onion\:amber\:system/trigger

And reboot. Afterwards, the LED should stop blinking once the booting is completed. You can check again with the first line of code that the change is permanent, you should get [default-on].

Edit: it's working!

The last time was just the hotspot was not properly created. Thank you @WereCatf !

In case anyone wants to try: http://www74.zippyshare.com/v/v8arpumN/file.html

Both Omega2-ctrl and fast-gpio working. It's a bit heavy, I think, due to having nano installed (I prefer it to vi) I will update with how to config WiFi, even though it's explained along the topic.

Just for the Omega2 plus!

Thank you @WereCatf

Added the line to /etc/config/network

Also edited /etc/config/firewall

Restarted both network and firewall, not working. Rebooted, not working.

Excuse me for the double post, I add these lines to /etc/config/wireless

config wifi-iface
    option device 'radio0'
    option network 'wwan'
    option mode 'sta'
    option ssid 'myssid'
    option encryption 'psk2'
    option key 'mykey'
    option disabled '0'

Then I do wifi up and it''s not working. I can connect to the Omega2+ but not the other way round.

Thank you.

Thank you @WereCatf !

I'll try to have a look at it this week. If I'm able to enable WiFi I will stick to my image as GPIO's are working perfectly.

Hi,

Some of the pins have different modes:

They need to be set as GPIO in order to work as you want to. The easiest, or I think so, way to set them is:

omega2-ctrl gpiomux set groupofpins gpio

You can see it explained here: https://docs.onion.io/omega2-docs/using-gpios.html

However, I think that omega2-ctrl doesn't work with the current firmware. You have to install an older version, wait till they fix /dev/mem in a future release or make your custom image. Of course, I think you can also write directly into the memory the behaviour of the pins.

Hi all,

This might be a dumb question as, of course, the needed software strongly depends on the project that is going to be carried out However, does someone have any suggestion about any packages? Of course, it can be explained with the project.

The idea behing this is to be able to build different light images for different projects, just with the needed.

Thank you!

@Costas-Costas @Zogg-Baubas you can always build your LEDE based firmware. I know it's a pity not having a properly working firmware, but I am enjoying a lot building my own and I think it will be, once I learn more and find some useful packages, the way to go for me.

I can explain you how to do it (credits to @WereCatf though, who explained it to me and is being great help).

I have some problems now with WiFi, I am not able to configure in /etc/config/wireless but appart from that GPIOs are working perfectly. Once I get WiFi to work, the goal will be getting rid of any not needed stuff to get the lightest image possible.

Cheers,

Iker.

@Costas-Costas said in Question about building custom image:

@Iker maybe you can teach Onion how to get Fast-gpio working.

I think, but I am a real noob, they need to have /dev/mem enabled. With that enabled, the package works.

@WereCatf said in Question about building custom image:

@Iker AFAIK wifisetup tries to use the proprietary wifi-driver, which obviously is missing from your image. I haven't touched the official firmware in a while now, but I think the wifi-interface was called ra0 instead of wlan0, and that may or may not be the cause of the issue. I really don't have any interest in wifisetup, so I have not given it a look.

Thank you for the info! I'll try messing a little bit with the config file. It's great to be able to create custom firmwares.

Thank you very much @WereCatf ! I didn't want to bother you at NTC with another DM about this and you ended answering here Everything worked, now I know how to build my image! Only one of the packages had the git@github and that one was making eveything fail.

Fast-gpio and Omega2-ctrl working like charms. Wifisetup doesn't connect though, I'll check the script trying to find any missing dependence.

Thank you.