I have change /overlay to be on a USB drive but my /tmp directory appears to be too small and so pip3 is failing to install some modules. How can I change the /tmp directory to just be on the 32GB USB drive?
Thanks
M
Posts made by Mark Fisher
-
Move /tmp from tmpfs to USBposted in Omega Talk
-
RE: SMS on Omega LTEposted in Omega Talk
I too would like access to the SMS in addition to the data. What is the serial port and speed for accessing the modem?
mark
-
RE: Micropython LVGL Colourposted in Omega Talk
I am definitely going to try that next, but I think the problem may be specific to the Omega port of the Micropython library so I thought I would try here first.
Sorry I wasn't quite clear in my explanation. I have found a few examples showing how to change the PRESSED colour:
style.set_bg_color(lv.STATE.PRESSED, lv_colors.GRAY)which works in the emulator but doesn't work on the Dash. I get errors saying that the object has no attribute 'set_bg_color' and there is no module 'lv_colors'.
Also this port doesn't have a textarea widget. So I am just wondering if there is any kind of documentation on what has been ported and what hasn't.
-
Micropython LVGL Colourposted in Omega Talk
I have been playing around with LVGL and Micropython on the Dash and have had some success. I can't find much documentation on how to change styles in Micropython but I have been able to figure out how to change the main colour but cannot figure out how to change the colour when a button is pressed. Anyone have example code or know where there might be more complete LVGL Micropython documentation?
Thanks.
-
Omega2 PoE Ethernet Schematicposted in Omega Talk
Hi All,
for whatever reason, I struggled for some time to get my own ethernet interface working with the Omega 2/2+. I wanted to make my own specific breakout with 2.1mm power, USB and ethernet in a minimal footprint. First, I tried using an RJ45 connector with a sperate magnetics package but could not get any of them working. I had immediate success with a MagJack (RJ45 with built-in magnetics). After that project, I then wanted to build a PoE version and came up with the schematic below which again uses a MagJack with the addition of a PoE module.
One of my requirements for any project is that the parts are easily accessible and will be available again in the future so this eliminates eBay, Alibaba, etc. To that end, all of these parts are available in North America from Digikey, Mouser, Adafruit, and others.
PoE Module (https://www.adafruit.com/product/3848)
SI-52008-F MagJack (Digikey)I hope you find this helpful.
-
Omega RTC Integrationposted in Omega Talk
Hi All,
I will be using some Omegas where there is no connectivity at times and so will be installing an RTC. Reading and writing from/to the RTC is no problem however I am wondering what the exact mechanism is that the Onion uses to sync network time. Ideally I would like to see if a network time server is available and if so sync the system time and then update the RTC. If no server is available then have the system time set from the RTC. Failing that I would be happy to just turn off the network time sync and have the Omega just use the RTC as the source.
Thanks, Mark
-
RE: New OS Release!posted in Omega Talk
@György-Farkas Thanks for the suggestion. I tried that and got the same result. I am going to try and upgrade a different unit tomorrow and see how that goes.
-
RE: New OS Release!posted in Omega Talk
@György-Farkas I tried those methods and the boot always failed after the upgrade.
Thanks for the note on how to enter blocks of code <head-slap> I write most of my notes in markdown I just didn't think to try it.
For anyone interested here is the console out from the last attempt at upgrading:
[ 0.000000] Linux version 4.4.74 (root@3fbe4dcb626f) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3484-d8f14ba) ) #0 Tue Mar 27 17:21:32 2018 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) [ 0.000000] MIPS: machine is Onion Omega2+ [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=0000ac70 [ 0.000000] Readback ErrCtl register=0000ac70 [ 0.000000] Memory: 125488K/131072K available (3102K kernel code, 145K rwdata, 740K rodata, 164K init, 196K bss, 5584K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] intc: using register map from devicetree [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource_probe: no matching clocksources found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.007522] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.070043] pid_max: default: 32768 minimum: 301 [ 0.074638] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080974] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.094651] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.104159] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.110171] pinctrl core: initialized pinctrl subsystem [ 0.115934] NET: Registered protocol family 16 [ 0.140713] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.146270] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.151689] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.158289] i2c-mt7621 10000900.i2c: clock 100KHz, re-start not support [ 0.165807] clocksource: Switched to clocksource MIPS [ 0.172359] NET: Registered protocol family 2 [ 0.177573] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.184262] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.190447] TCP: Hash tables configured (established 1024 bind 1024) [ 0.196638] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.202237] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.208621] NET: Registered protocol family 1 [ 0.219174] Crashlog allocated RAM at address 0x3f00000 [ 0.240601] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.246259] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.259019] io scheduler noop registered [ 0.262762] io scheduler deadline registered (default) [ 0.268867] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.276283] console [ttyS0] disabled [ 0.279716] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A [ 0.288482] console [ttyS0] enabled [ 0.288482] console [ttyS0] enabled [ 0.295462] bootconsole [early0] disabled [ 0.295462] bootconsole [early0] disabled [ 0.304138] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A [ 0.313648] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A [ 0.324213] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 0.334257] m25p80 spi32766.0: using chunked io (size=31) [ 0.339823] m25p80 spi32766.0: mx25l25635e (32768 Kbytes) [ 0.345331] 4 ofpart partitions found on MTD device spi32766.0 [ 0.351261] Creating 4 MTD partitions on "spi32766.0": [ 0.356491] 0x000000000000-0x000000030000 : "u-boot" [ 0.363299] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.370613] 0x000000040000-0x000000050000 : "factory" [ 0.377665] 0x000000050000-0x000002000000 : "firmware" [ 0.425571] 2 uimage-fw partitions found on MTD device firmware [ 0.431622] 0x000000050000-0x000000197930 : "kernel" [ 0.438345] 0x000000197930-0x000002000000 : "rootfs" [ 0.445166] mtd: device 5 (rootfs) set to be root filesystem [ 0.451049] 1 squashfs-split partitions found on MTD device rootfs [ 0.457344] 0x000000740000-0x000002000000 : "rootfs_data" [ 0.475238] rt3050-esw 10110000.esw: link changed 0x00 [ 0.481335] mtk_soc_eth 10100000.ethernet: generated random MAC address 9e:27:c0:7c:bd:c6 [ 0.490520] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 0.499166] i2c /dev entries driver [ 0.503268] mt7621_wdt 10000120.watchdog: Initialized [ 0.510002] NET: Registered protocol family 10 [ 0.518796] NET: Registered protocol family 17 [ 0.523400] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.536267] 8021q: 802.1Q VLAN Support v1.8 [ 0.547321] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 0.555385] Freeing unused kernel memory: 164K (803e7000 - 80410000) [ 1.581205] init: Console is alive [ 1.584881] init: - watchdog - [ 4.119739] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.246212] usbcore: registered new interface driver usbfs [ 4.251872] usbcore: registered new interface driver hub [ 4.257423] usbcore: registered new device driver usb [ 4.269152] exFAT: Version 1.2.9 [ 4.313410] SCSI subsystem initialized [ 4.323951] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.332405] ehci-platform: EHCI generic platform driver [ 4.348100] phy phy-10120000.usbphy.0: remote usb device wakeup disabled [ 4.354904] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz [ 4.360250] ehci-platform 101c0000.ehci: EHCI Host Controller [ 4.366131] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 4.374287] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 4.395851] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 4.403370] hub 1-0:1.0: USB hub found [ 4.407617] hub 1-0:1.0: 1 port detected [ 4.416662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.424607] ohci-platform: OHCI generic platform driver [ 4.430271] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 4.437246] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 4.445359] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 4.511010] hub 2-0:1.0: USB hub found [ 4.515265] hub 2-0:1.0: 1 port detected [ 4.532731] MTK MSDC device init. [ 4.576003] mtk-sd: MediaTek MT6575 MSDC Driver [ 4.584043] sdhci: Secure Digital Host Controller Interface driver [ 4.590393] sdhci: Copyright(c) Pierre Ossman [ 4.596345] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.606737] usbcore: registered new interface driver usb-storage [ 4.616608] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.634428] init: - preinit - [ 4.861596] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.563707] usb-storage 1-1:1.0: USB Mass Storage device detected [ 5.579807] rt3050-esw 10110000.esw: link changed 0x00 [ 5.585252] scsi host0: usb-storage 1-1:1.0 [ 5.667408] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 7.934427] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 7.948624] urandom-seed: Seed file not found (/etc/urandom.seed) [ 8.141385] procd: - early - [ 8.144420] procd: - watchdog - [ 8.724899] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 4 [ 8.736656] sd 0:0:0:0: [sda] 30670848 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 8.745415] sd 0:0:0:0: [sda] Write Protect is off [ 8.751432] sd 0:0:0:0: [sda] No Caching mode page found [ 8.756878] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 8.769316] sda: sda1 [ 8.776683] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.051295] rt3050-esw 10110000.esw: link changed 0x01 [ 9.274277] procd: - watchdog - [ 9.277871] procd: - ubus - [ 9.339012] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.348681] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.357972] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.371200] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.380477] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.389807] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.399175] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.408733] procd: - init - Please press Enter to activate this console. [ 9.825423] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.861537] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 9.931616] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.958000] gdma-rt2880 10002800.gdma: revision: 3, channels: 16 [ 10.409917] [ 10.409917] [ 10.409917] === pAd = c0572000, size = 1182848 === [ 10.409917] [ 10.420797] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) [ 10.486876] Linux video capture interface: v2.00 [ 10.798967] hidraw: raw HID events driver (C) Jiri Kosina [ 10.824321] ralink-i2s 10000a00.i2s: mclk 480KHz [ 10.876477] max98090 0-0010: Unrecognized revision 0xff [ 10.881794] max98090 0-0010: Mismatch in DT specified CODEC type. [ 10.890583] max98090 0-0010: use default 2.8v micbias [ 10.910742] asoc-simple-card sound: HiFi <-> 10000a00.i2s mapping ok [ 10.953969] Bluetooth: Core ver 2.21 [ 10.957790] NET: Registered protocol family 31 [ 10.962300] Bluetooth: HCI device and connection manager initialized [ 10.968788] Bluetooth: HCI socket layer initialized [ 10.973740] Bluetooth: L2CAP socket layer initialized [ 10.978907] Bluetooth: SCO socket layer initialized [ 10.986398] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.991797] Bluetooth: BNEP filters: protocol multicast [ 10.997154] Bluetooth: BNEP socket layer initialized [ 11.009027] usbcore: registered new interface driver btusb [ 11.018777] usbcore: registered new interface driver cdc_acm [ 11.024528] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.036602] Bluetooth: HCI UART driver ver 2.3 [ 11.041123] Bluetooth: HCI UART protocol H4 registered [ 11.046380] Bluetooth: HCI UART protocol BCSP registered [ 11.056057] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 11.062088] Bluetooth: HIDP socket layer initialized [ 11.070206] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.091610] nf_conntrack version 0.5.0 (1963 buckets, 7852 max) [ 11.122407] Bluetooth: RFCOMM TTY layer initialized [ 11.127453] Bluetooth: RFCOMM socket layer initialized [ 11.132723] Bluetooth: RFCOMM ver 1.11 [ 11.144426] spidev spi32766.1: buggy DT: spidev listed directly in DT [ 11.151044] ------------[ cut here ]------------ [ 11.155745] WARNING: CPU: 0 PID: 500 at drivers/spi/spidev.c:720 init_module+0x933c/0x9dec [spidev]() [ 11.165110] Modules linked in: spidev(+) snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 snd_soc_max98090 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core mt_wifi ralink_gdma virt_dma ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 cryptomgr aead crypto_null crc32c_generic crypto_hash [ 11.272042] CPU: 0 PID: 500 Comm: kmodloader Not tainted 4.4.74 #0 [ 11.278320] Stack : 80380780 00000000 00000001 803d0000 87d2078c 803cae63 80361c18 000001f4 80413438 00000012 0000001a 024000c0 80066378 8004af58 80367120 803c0000 00000003 00000012 80365524 87569b4c 80066378 80048ec4 00000000 00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ... [ 11.314474] Call Trace: [ 11.317029] [<80066378>] module_sect_show+0x0/0x18 [ 11.321895] [<8004af58>] vprintk_default+0x24/0x30 [ 11.326786] [<80066378>] module_sect_show+0x0/0x18 [ 11.331649] [<80048ec4>] printk+0x2c/0x38 [ 11.335728] [<8002552c>] warn_slowpath_common+0xa0/0xd0 [ 11.341059] [<8014de3c>] dump_stack+0x14/0x28 [ 11.345482] [<80014908>] show_stack+0x50/0x84 [ 11.349917] [<8002552c>] warn_slowpath_common+0xa0/0xd0 [ 11.355226] [<8775833c>] init_module+0x933c/0x9dec [spidev] [ 11.360912] [<800255e4>] warn_slowpath_null+0x18/0x24 [ 11.366070] [<801fb304>] of_match_node+0x20/0x44 [ 11.370778] [<8775833c>] init_module+0x933c/0x9dec [spidev] [ 11.376466] [<801c0a10>] devm_kfree+0x20/0x44 [ 11.380903] [<801e1bd8>] spi_drv_probe+0x3c/0x84 [ 11.385597] [<801bd540>] driver_probe_device+0x120/0x288 [ 11.391023] [<8008b928>] kstrdup+0x44/0x8c [ 11.395193] [<801e1ad8>] spi_match_device+0x38/0xa8 [ 11.400181] [<801bd724>] __driver_attach+0x7c/0xb4 [ 11.405044] [<801bb948>] next_device+0x10/0x30 [ 11.409571] [<801bd6a8>] __driver_attach+0x0/0xb4 [ 11.414341] [<801bba04>] bus_for_each_dev+0x9c/0xac [ 11.419311] [<80303c9c>] klist_add_tail+0x24/0x50 [ 11.424092] [<801bb7d8>] bus_get+0x2c/0x50 [ 11.428282] [<801bcc38>] bus_add_driver+0xec/0x20c [ 11.433151] [<800ae92c>] exact_match+0x0/0x8 [ 11.437503] [<800aee34>] exact_lock+0x0/0x24 [ 11.441855] [<801bde3c>] driver_register+0xa8/0xf8 [ 11.446736] [<8774f000>] init_module+0x0/0xdc [spidev] [ 11.451982] [<8774f098>] init_module+0x98/0xdc [spidev] [ 11.457308] [<80159a08>] kasprintf+0x1c/0x28 [ 11.461656] [<800458b0>] __wake_up+0x24/0x48 [ 11.466007] [<8774f000>] init_module+0x0/0xdc [spidev] [ 11.471243] [<8000d938>] do_one_initcall+0x1e8/0x214 [ 11.476305] [<800458b0>] __wake_up+0x24/0x48 [ 11.480641] [<8774f000>] init_module+0x0/0xdc [spidev] [ 11.485887] [<80034568>] call_usermodehelper_exec+0x144/0x160 [ 11.491731] [<80034058>] call_usermodehelper_setup+0x38/0xa8 [ 11.497512] [<80066378>] module_sect_show+0x0/0x18 [ 11.502394] [<80067598>] do_init_module+0x74/0x1cc [ 11.507286] [<8009f418>] __vunmap+0xf0/0x114 [ 11.511650] [<80068e2c>] load_module+0x16c0/0x1b68 [ 11.516531] [<80066964>] unknown_module_param_cb+0x0/0xac [ 11.522015] [<8009f90c>] __vmalloc_node+0x34/0x40 [ 11.526826] [<80069368>] SyS_init_module+0x94/0x180 [ 11.531780] [<80069404>] SyS_init_module+0x130/0x180 [ 11.536861] [<8000682c>] syscall_common+0x30/0x54 [ 11.541642] [<80008c58>] __bzero+0xbc/0x164 [ 11.545897] [ 11.547411] ---[ end trace 0dc5952289822307 ]--- [ 11.559464] usbcore: registered new interface driver ums-alauda [ 11.568641] usbcore: registered new interface driver ums-cypress [ 11.577854] usbcore: registered new interface driver ums-datafab [ 11.586823] usbcore: registered new interface driver ums-freecom [ 11.595992] usbcore: registered new interface driver ums-isd200 [ 11.605150] usbcore: registered new interface driver ums-jumpshot [ 11.614272] usbcore: registered new interface driver ums-karma [ 11.623985] usbcore: registered new interface driver ums-sddr09 [ 11.633134] usbcore: registered new interface driver ums-sddr55 [ 11.642585] usbcore: registered new interface driver ums-usbat [ 11.654803] usbcore: registered new interface driver usbhid [ 11.660534] usbhid: USB HID core driver [ 11.668283] usbcore: registered new interface driver usblp [ 11.682281] usbcore: registered new interface driver usbserial [ 11.688400] usbcore: registered new interface driver usbserial_generic [ 11.695130] usbserial: USB Serial support registered for generic [ 11.713795] Driver for 1-wire Dallas network protocol. [ 11.740496] xt_time: kernel timezone is -0000 [ 11.747368] usbcore: registered new interface driver ch341 [ 11.753061] usbserial: USB Serial support registered for ch341-uart [ 11.761946] usbcore: registered new interface driver cp210x [ 11.767814] usbserial: USB Serial support registered for cp210x [ 11.777485] usbcore: registered new interface driver ftdi_sio [ 11.783435] usbserial: USB Serial support registered for FTDI USB Serial Device [ 11.805786] usbcore: registered new interface driver pl2303 [ 11.811641] usbserial: USB Serial support registered for pl2303 [ 11.823166] PPP generic driver version 2.4.2 [ 11.830833] NET: Registered protocol family 24 [ 11.848907] usbcore: registered new interface driver snd-usb-audio [ 11.871030] usbcore: registered new interface driver uvcvideo [ 11.876929] USB Video Class driver (1.1.1) [ 11.889816] usbcore: registered new interface driver option [ 11.895584] usbserial: USB Serial support registered for GSM modem (1-port) [ 11.908355] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.180432] random: jshn: uninitialized urandom read (4 bytes read, 32 bits of entropy available) [ 12.338508] random: jshn: uninitialized urandom read (4 bytes read, 32 bits of entropy available) [ 23.367307] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready [ 24.073157] [ 24.073157] _ _____ ___ ___ _________ ___ ____ [ 24.073157] | | /| / / _ | / _ \/ _ \ / ___/ __ \/ _ \/ __/ V1.0 [ 24.073157] | |/ |/ / __ |/ , _/ ___/ / /__/ /_/ / , _/ _/ [ 24.073157] |__/|__/_/ |_/_/|_/_/ \___/\____/_/|_/___/ [ 24.073157] Onion Enhanced MT7688 WiFi Driver [ 24.073157] [ 24.435870] DMA Scheduler Mode=0(LMAC) [ 24.439704] efuse_probe: efuse = 10000012 [ 24.443826] 1. Phy Mode = 14 [ 24.611598] ERROR: initialization error 781: [ 24.611598] buffer=303030303030303030306138 [ 24.611598] [ 24.729924] ERROR: initialization error 781: [ 24.729924] buffer=303030303030303030306138 [ 24.729924] [ 25.289526] ERROR: initialization error 781: [ 25.289526] buffer=303030303030303030306138 [ 25.289526] [ 53.739438] [ 53.739438] _ _____ ___ ___ _________ ___ ____ [ 53.739438] | | /| / / _ | / _ \/ _ \ / ___/ __ \/ _ \/ __/ V1.0 [ 53.739438] | |/ |/ / __ |/ , _/ ___/ / /__/ /_/ / , _/ _/ [ 53.739438] |__/|__/_/ |_/_/|_/_/ \___/\____/_/|_/___/ [ 53.739438] Onion Enhanced MT7688 WiFi Driver [ 53.739438] [ 53.896622] Kernel bug detected[#1]: [ 53.900278] CPU: 0 PID: 1414 Comm: ifconfig Tainted: G W 4.4.74 #0 [ 53.907693] task: 87dce338 ti: 86a52000 task.ti: 86a52000 [ 53.913162] $ 0 : 00000000 80410000 00000001 ffff9fdc [ 53.918480] $ 4 : c062302c ffff9fe6 86e765f0 c062302c [ 53.923790] $ 8 : 0000001c c0609238 86e41f2c 00000000 [ 53.929101] $12 : 00000000 b7924e27 00000000 00000000 [ 53.934410] $16 : c062302c 00090000 000b0000 86f40000 [ 53.939721] $20 : c062302c c0602000 00000001 7fcf296c [ 53.945032] $24 : 00000018 80043388 [ 53.950342] $28 : 86a52000 86a53c78 00000000 86e52630 [ 53.955654] Hi : 00000000 [ 53.958570] Lo : 0000000a [ 53.961506] epc : 80053f18 add_timer+0x8/0x14 [ 53.966615] ra : 86e52630 RTMPSetTimer+0x80/0x110 [mt_wifi] [ 53.972527] Status: 1100e503 KERNEL EXL IE [ 53.976783] Cause : 10800034 (ExcCode 0d) [ 53.980847] PrId : 00019655 (MIPS 24KEc) [ 53.984908] Modules linked in: pppoe ppp_async option iptable_nat w1_therm w1_gpio uvcvideo usb_wwan snd_usb_audio pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ftdi_sio cp210x ch341 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG wire videobuf2_v4l2 usbserial usblp usbhid ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda uinput spidev snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 snd_soc_max98090 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core mt_wifi ralink_gdma virt_dma ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 cryptomgr aead crypto_null crc32c_generic crypto_hash [ 54.135010] Process ifconfig (pid: 1414, threadinfo=86a52000, task=87dce338, tls=77753d48) [ 54.143383] Stack : c0572000 00090000 000b0000 c0572000 c0572000 86e40a74 c0576960 c0692000 86f16314 86eaafb0 00000001 86e50bf8 c0572000 86f40000 c0692000 86f16314 86f16314 87642f00 7fcf29ec 86e53948 7fcf29ec 86efe2f0 86f16314 00000000 00000141 0000581c 86c5c000 c0572000 86c5c000 0000502e 803d0000 ffff9fcc 87642f00 86ed8fd0 803caa00 8780fc90 86a53d08 86a53d08 00000000 00000000 ... [ 54.179516] Call Trace: [ 54.182006] [<80053f18>] add_timer+0x8/0x14 [ 54.186715] [<86e52630>] RTMPSetTimer+0x80/0x110 [mt_wifi] [ 54.193198] [<86e40a74>] MlmeInit+0x1ac/0x2f4 [mt_wifi] [ 54.199420] [<86e53948>] rt28xx_init+0x114/0x720 [mt_wifi] [ 54.205910] [<86ed8fd0>] rt28xx_open+0xbc/0x320 [mt_wifi] [ 54.212315] [<86e6a068>] RTMP_COM_IoctlHandle+0x508/0x9a4 [mt_wifi] [ 54.219600] [<86ed87f4>] MainVirtualIF_open+0x74/0x110 [mt_wifi] [ 54.226167] [<8021f104>] __dev_open+0xe0/0x148 [ 54.230681] [<8021f408>] __dev_change_flags+0xb8/0x174 [ 54.235897] [<8021f4ec>] dev_change_flags+0x28/0x70 [ 54.240849] [<80282f78>] devinet_ioctl+0x224/0x6dc [ 54.245723] [<80204300>] sock_ioctl+0x298/0x2f8 [ 54.250330] [<800bbbac>] do_vfs_ioctl+0x4fc/0x5b4 [ 54.255103] [<800bbcb4>] SyS_ioctl+0x50/0x98 [ 54.259445] [<8000682c>] syscall_common+0x30/0x54 [ 54.264210] [ 54.265716] Code: 27bd0030 8c820004 0002102b <00020336> 08014f5f 8c850008 27bdffd0 afbf002c afb30028 [ 54.275874] ---[ end trace 0dc5952289822308 ]--- [ 54.284381] Kernel panic - not syncing: Fatal exception in interrupt [ 54.292922] Rebooting in 3 seconds.. -
RE: New OS Release!posted in Omega Talk
@Eric-Jaouen
Hi Eric, I used the flash from USB method with firmware downloaded from the repository. The only challenges I ran into were that 1. I could never get the CP2102 driver to work on my mac so I had to switch to a Windows machine and 2. I actually had to read the instructions properly.
-
RE: New OS Release!posted in Omega Talk
I cannot get v.0.2.0-b177 or b178 to boot successfully on my 2+. I can roll back to v0.1.10-b160. I have tried using both the oupgrade and the USB drive method. I have a couple of questions:
- Has anyone else had this issue?
- Are the upgrades patches or complete firmware? I have had issues in the past with other devices when jumping too many versions. Has anyone else upgraded from v0.1.10-b160 to v.0.2.0-b177 directly or have you been on a something in the middle?
I can attach the console output if someone can tell me how to upload it correctly to this forum so that it appears as a scrollable code window rather than pasting a large amount of text.
Thanks, Mark
-
Omega 2 has changed its MAC and therefore Wifiposted in Omega Talk
While banging my head against a wall trying to get SPI to work, my Omega2 reset itself and has changed its MAC address. After it reset I noticed the wifi (Omega-C061) had changed to (Omega-00A8). I then ran the setup wizard and ran ifconfig and got the following:
root@Omega-00A8:~# ifconfig
apcli0 Link encap:Ethernet HWaddr 02:00:00:00:00:A8That is definitely not a correct mac. Anyone have an ideas?
Cheers
-
RE: I2C: how to read a single byte without register address?posted in Omega Talk
I have the same question. The current I2C library seems to have been written with a specific device in mind. Has anyone come up with a solution for this?
