Posts made by Noniono

@Lazar-Demin Thank you for providing the detailed steps to install avrdude v6.1-1.

I downloaded the avrdude 6.1-1 package file directly and installed it on my omega. However, it is still giving the same error when I am trying to flash a sketch.

Below I have attached a screenshot of the error when I manually flash the hex file as well as the grep command showing the version of the installed package.

I am not sure what else can be done to fix this issue now, please provide any suggestions that you have. Thanks!

@Lazar-Demin Thank you for your suggestion. I ran the command and it seems that I have v6.3-3 of avr. How can I downgrade it to the 6.1-1 version?

I had tried Option 2 in the Known Firmware issues, but there are no listings of the LEDE package repos in /etc/opkg/distfeeds.conf. So I tried following this guide to enable OpenWRT package repos. But it still installed the v6.3-3 of avrdude even after doing that.

@crispyoz Manually flashing hex file through the Omega terminal also gives the same error as in the Arduino IDE "AVR device not responding".

@crispyoz Here are the screenshots of the Arduino IDE showing the "AVR device not responding" error.

And I have the latest firmware installed.

I have tried Option 2 for deactivating the LEDE package repos mentioned in the Known Firmware Issues doc, but it has not helped with the error.

I have also tried manually flashing the sketch by uploading the precompiled hex file to omega and then flashing through the omega terminal, but that has also not solved the issue.

This issue came and went earlier, and I chalked it up to the Arduino Dock probably getting overheated. But now the error comes every time I try to upload a sketch. Kindly help me out, please.
Thank you!

@crispyoz I am using Onion Omega2 with Arduino Dock 2 as well and I am encountering the same Arduino upload error even after updating to the latest firmware and reinstalling the opkg Arduino package. Any suggestions for how I can get over this issue?
Thanks in advance!