Really great, thanks @Lazar-Demin the upgrade went well 
The 1-wire interface seems to be initialized on the onion. But - shame on me - I missed the actual driver for the thermal sensors. The driver is included in kmod-w1-slave-therm
Could you add this package possibly?
O
Best posts made by Omega303
-
RE: Driver for 1-Wire sensor busposted in Omega Talk
-
RE: Driver for 1-Wire sensor busposted in Omega Talk
@Nathan-Bertram Although I found a DS18B20 spec telling the sensor can be driven from 3.0 to 5.5 Volts, I recommend the 3.3 V instead of 5V. But more important is to insert a 4.7 kOhm resistor between data pin and GPIO. I think the missing resistor disables proper communication. The sensor id needs to remain the same - it is the hardware address for the 1-wire master to request data. Here is how I connected the sensor:
