@emma-humphries posted about this same issue here and provided the solution she found as well. Her solution worked for me. Thank you @emma-humphries!
S
Posts made by Scott Smith
-
RE: Onion Omega Pro broken?posted in Omega Talk
-
RE: Determining demand for an Omega and Omega 2 bookposted in Omega Talk
I've enjoyed your books about other platforms. They are very thorough, the Onion platform would benefit very much. I hope you decide to write this one.
-
RE: ads1x15-chip command not workposted in Omega Talk
2Luciano-s, thanks, that explains my confusion. @Kit-Bishop, this is timely and much appreciated, thanks for all your work!
-
RE: ads1x15-chip command not workposted in Omega Talk
@Kit-Bishop , are you sure of that README.MD link? It links to info about "A toolbox for algorithmic remixing, after Echo Nest Remix"?
-
RE: Playing with oled-expposted in Omega Talk
Just updated from b234 to b236, now the Image function of the OLED Expansion Control of the Control Panel displays the image in a torn, skewed manner. It worked correctly in b234. Worked correctly in b234.
Issue on github: https://github.com/OnionIoT/i2c-exp-driver/issues/3 -
RE: Oled Screenposted in Omega Talk
@Boken-Lin, are the red and black connections at the bottom of the diagram correct?
Comparing it to the diagram on the GPIO tool on the Console and the diagram of the Expansion dock, it looks like in this diagram, 2.8V of the Omega (black) is tied to GND of the Oled and GPIO26 of the Omega (red) is tied to 2.5V of the Oled.
The Green, gold and red connections at the top of the diagram make sense, as GPIO20 (I2C_SCL), GPIO21 (I2C_SDA) and 3.3V.