Thank you @crispyoz for this helpful tip.
The link you shared was exactly what I was looking for, and by following the steps, I now have the device drivers installed and can communicate with BG95 over ttyUSB2 serial port.
Next step is for me to understand how to modify the omega2-lte-base package to work with BG95, but for now I can mark this post as solved.
Thanks again for your help.
Thanks for the follow up @crispyoz
It makes sense that the ttyUSB* doesn't show up because the drivers are probably not installed.
The official driver from Quectel contains 3 files, Makefile, options.c and usb-serial.h:
https://drive.google.com/drive/folders/1-B0btFw6k0JDuIIYaq0Whmti1rmE5uFW?usp=sharing
I tried to compile the makefile, but it shows error:
If i manually make that /build folder then other errors show up:
Can you help me understand how to install and execute the drivers?
I tried to look online, but no luck.
I also looked at the hotplug and compared omega lte dev vs omega2 pro dev and they look similar, so im stuck there as well.
Really appreciate your time, I feel like we are getting closer.
Thanks @Jeff-Seese and @crispyoz for your suggestions.
To check if hardware is correct, i first connected the BG95 as a usb device to a windows computer, and after installing the official drivers it was detected and working.
Then i connected the BG95 to a Omega2 pro board (which has usb port on board), and after running lsusb the device is detected.
but it doesn't show up on ls /dev
"lsusb":
"ls /dev":
So the next question is how i "mount" the detected device as a ttyUSB* device so that i can write "AT" and receive "OK".
Hi everyone
We are developing a IOT gateway and using Omega2S+ as the microprocessor for it.
Previously we have used Omega2S+ LTE dev board to develop and test the firmware written in Python. When we were comfortable with the firmware and knew which io pins we need, we went ahead with custom pcb with omega dev board as reference schematic.
We decided to go with the less powerful BG95, instead of EC25, as we don't need the higher bandwidth or speed.
Now we have received the pcb and are unsure on how to get BG95 working with the Omega2S+. Rest of the pcb is working fine.
Here is the stripped down version of the schematic:
Quectel offers official drivers for Windows and Linux, but we have no idea on how to install them on OpenWrt.
https://www.quectel.com/ProductDownload/BG95.zip
When we run 'ls /dev', there is no ttyUSB* device detected.
When we run 'lsusb', only two devices show up:
If we try to 'opkg install omega2-lte-base', we get the following error:
Any help would be appreciated as we are kind of stuck with a bunch of pcbs that are not functional and our business is depending on them.
Hi
We are developing a product that will be installed for customers, both private and business.
The onion board have LTE connectivity on board, that will be used to publish/subscribe over MQTT protocol.
We would also like to be able to access onion board over SSH, to update or troubleshoot errors.
Is this something that can be done over LTE?
@crispyoz yeah, you are right. It looks like there is no support for omega board, that's to bad. It would have been a awesome way to develop.
Okay, i successfully installed bash, and it went further.
However this time the error says, "Unsupported architecture".
I don't know if you can do anything about it, or if it is up to vscode developers to add support for it.
-------------------------- Full log -------------------------------------
[19:45:44.048] Log Level: 2
[19:45:44.055] remote-ssh@0.56.0
[19:45:44.055] win32 x64
[19:45:44.058] SSH Resolver called for "ssh-remote+7b22686f73744e616d65223a2257617474776f726b6572227d", attempt 1
[19:45:44.058] SSH Resolver called for host: Wattworker
[19:45:44.058] Setting up SSH remote "Wattworker"
[19:45:44.116] Using commit id "e5a624b788d92b8d34d1392e4c4d9789406efe8f" and quality "stable" for server
[19:45:44.119] Install and start server if needed
[19:45:45.411] Checking ssh with "ssh -V"
[19:45:45.462] > OpenSSH_for_Windows_7.7p1, LibreSSL 2.6.5
[19:45:45.469] Running script with connection command: ssh -T -D 59128 Wattworker bash
[19:45:45.474] Terminal shell path: C:\WINDOWS\System32\cmd.exe
[19:45:46.388] > root@192.168.3.1's password:]0;C:\WINDOWS\System32\cmd.exe
[19:45:46.388] Got some output, clearing connection timeout
[19:45:46.389] Showing password prompt
[19:45:50.773] Got password response
[19:45:50.774] "install" wrote data to terminal: "********"
[19:45:50.788] >
[19:45:51.136] > b478c40a8081: running
[19:45:51.226] > Unsupported architecture: mips
[19:45:51.250] > b478c40a8081: start
exitCode==27==
sshAuthSock====
listeningOn====
osReleaseId==openwrt==
arch==mips==
webUiAccessToken====
tmpDir==/tmp==
platform==linux==
b478c40a8081: end
[19:45:51.250] Received install output:
exitCode==27==
sshAuthSock====
listeningOn====
osReleaseId==openwrt==
arch==mips==
webUiAccessToken====
tmpDir==/tmp==
platform==linux==
[19:45:51.252] Unsupported architecture
[19:45:51.258] Resolver error: Error: The remote host's architecture is not supported
at Function.ServerInstallError (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:94355)
at c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:92085
at Object.t.handleInstallOutput (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:93073)
at I (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:106975)
at processTicksAndRejections (internal/process/task_queues.js:94:5)
at async c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:104974
at async Object.t.withShowDetailsEvent (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:110096)
at async Object.t.resolve (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:108158)
at async c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:143767
[19:45:51.263] ------
Hi all.
New here. We at Wattworker, a startup company in Norway are working on developing a awesome new product to optimize water heater power usage by the use on machine learning. We have chosen Omega2S+ to be the brain in our PCB.
http://wattworker.com/
I use Visual Studio Code for my workflow. It has a awesome official extension called "Remote SSH", that enables remote development with many advanced features. When successfully connected, all files and folders appear in the left panel, while ssh terminal appear in bottom panel. It makes it super easy and efficient to develop with.
Config file:
I tried to enter Onion as host, however vscode gives a error: Bash not found. The whole log in below. It does however work with raspberry pi and all other linux distros.
Can anyone help us here?
------------------------------ Full Error Log -----------------------------
[17:15:32.863] Log Level: 2
[17:15:32.872] remote-ssh@0.56.0
[17:15:32.872] win32 x64
[17:15:32.874] SSH Resolver called for "ssh-remote+7b22686f73744e616d65223a2257617474776f726b6572227d", attempt 1
[17:15:32.874] SSH Resolver called for host: Wattworker
[17:15:32.874] Setting up SSH remote "Wattworker"
[17:15:32.919] Using commit id "e5a624b788d92b8d34d1392e4c4d9789406efe8f" and quality "stable" for server
[17:15:32.923] Install and start server if needed
[17:15:34.633] Checking ssh with "ssh -V"
[17:15:34.682] > OpenSSH_for_Windows_7.7p1, LibreSSL 2.6.5
[17:15:34.691] Running script with connection command: ssh -T -D 57404 Wattworker bash
[17:15:34.695] Terminal shell path: C:\WINDOWS\System32\cmd.exe
[17:15:35.574] > root@192.168.3.1's password:]0;C:\WINDOWS\System32\cmd.exe
[17:15:35.574] Got some output, clearing connection timeout
[17:15:35.575] Showing password prompt
[17:15:38.354] Got password response
[17:15:38.354] "install" wrote data to terminal: "********"
[17:15:38.369] >
[17:15:38.393] > ash: bash: not found
[17:15:38.692] "install" terminal command done
[17:15:38.694] Install terminal quit with output: ash: bash: not found
[17:15:38.694] Received install output: ash: bash: not found
[17:15:38.706] Resolver error: Error: bash not found
at Function.Create (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:94424)
at c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:90746
at Object.t.handleInstallOutput (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:1:90947)
at I (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:106975)
at processTicksAndRejections (internal/process/task_queues.js:94:5)
at async c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:104974
at async Object.t.withShowDetailsEvent (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:110096)
at async Object.t.resolve (c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:108158)
at async c:\Users\Mohammad Waqas.vscode\extensions\ms-vscode-remote.remote-ssh-0.56.0\out\extension.js:127:143767
[17:15:38.713] ------