I tested with other omega2 and works fine, the omega2 is broken

@ccs-hello said in Omega2 doen't work:

Okay, you are using Expansion Dock (which has a switcher based buck converter.)

If you use a high quality USB cable (usually the thick, short charging type) and
instead of using PC's USB port output, use a 5A 2A USB charging adapter,
you'll be surprised.

ccs_hello

Well, I used a 5V-2A output charger and I'm not surprised, omega2 LED doesn't power on

Sorry the dock is EXP DOCK, I powered it with microUSB wire connected to a PC, in the 5V and 3.3V pins there is power, I tested it.

The DOCK's LED somethimes is RED, GREEN or is SHUTDOWN

Hi, I have the USB dock to connect the Omega2, the LED doesn't blink never but the Omega2 is heated a little bit, well, I suppose that the LED is broken but the Omega is working, but I don't see any other device in my LAN and there is no "Omega" SSID in my SSID scan.

I tried reseting pushing reset button more than 10 seconds but It doesn't work.

Any idea? Thank you very much.