Omega2 - LED goes solid for few seconds, then off completely

[Piotr Swat]

Hello,

I've used this breakout (https://www.tindie.com/products/MatthewWolfe/micro-usb-to-33v-breakout/) to connect my Omega2 to USB for power, but sadly LED goes solid on for few seconds just to go completely off seconds later. Unit gets a little warm over time, but nothing pop ups in my WiFi networks. I've used this guide (https://docs.onion.io/omega2-docs/hardware-prep-no-dock.html) to connect to right pins.

[Douglas Kryder]

@Piotr-Swat 250mA is not enough current for the omega2. having 1 Amp minimum for a good boot is probably the best thing.