help with arduino dock
-
Hi,
would someone be able to help out with the arduino dock. I was able to do the initial setup, and it looks like it worked..- the result ----
root@Omega-0B03:~# sh /usr/bin/arduino-dock flash bootloader > Flashing bootloader... avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e950f avrdude: erasing chip avrdude: reading input file "0x3f" avrdude: writing lock (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of lock written avrdude: verifying lock memory against 0x3f: avrdude: load data lock data from input file 0x3f: avrdude: input file 0x3f contains 1 bytes avrdude: reading on-chip lock data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lock verified avrdude: reading input file "0x05" avrdude: writing efuse (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of efuse written avrdude: verifying efuse memory against 0x05: avrdude: load data efuse data from input file 0x05: avrdude: input file 0x05 contains 1 bytes avrdude: reading on-chip efuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of efuse verified avrdude: reading input file "0xDA" avrdude: writing hfuse (1 bytes): Writing | ################################################## | 100% 0.01s avrdude: 1 bytes of hfuse written avrdude: verifying hfuse memory against 0xDA: avrdude: load data hfuse data from input file 0xDA: avrdude: input file 0xDA contains 1 bytes avrdude: reading on-chip hfuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of hfuse verified avrdude: reading input file "0xFF" avrdude: writing lfuse (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of lfuse written avrdude: verifying lfuse memory against 0xFF: avrdude: load data lfuse data from input file 0xFF: avrdude: input file 0xFF contains 1 bytes avrdude: reading on-chip lfuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lfuse verified avrdude done. Thank you. avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e950f avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "/usr/share/arduino-dock/twibootloader.hex" avrdude: input file /usr/share/arduino-dock/twibootloader.hex auto detected as Intel Hex avrdude: writing flash (31808 bytes): Writing | ################################################## | 100% 1.19s avrdude: 31808 bytes of flash written avrdude: verifying flash memory against /usr/share/arduino-dock/twibootloader.hex: avrdude: load data flash data from input file /usr/share/arduino-dock/twibootloader.hex: avrdude: input file /usr/share/arduino-dock/twibootloader.hex auto detected as Intel Hex avrdude: input file /usr/share/arduino-dock/twibootloader.hex contains 31808 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 1.14s avrdude: verifying ... avrdude: 31808 bytes of flash verified avrdude: reading input file "0x0f" avrdude: writing lock (1 bytes): Writing | ################################################## | 100% 0.01s avrdude: 1 bytes of lock written avrdude: verifying lock memory against 0x0f: avrdude: load data lock data from input file 0x0f: avrdude: input file 0x0f contains 1 bytes avrdude: reading on-chip lock data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lock verified avrdude: safemode: Fuses OK (E:05, H:DA, L:FF) avrdude done. Thank you. > Done root@Omega-0B03:~# I get an error once trying to run the pgm blink2, because I'm not seeing the Omega in the port menu in the Arduino IDE, I'm using the second method, > Flashing application 'blink2.hex' ... device : /dev/i2c-0 (address: 0x29) version : (sig: 0x00 0x00 0x00 => unknown) flash size : 0x0000 / 0 (0x00 bytes/page) eeprom size : 0x0000 / 0 invalid memsize: 0x0c8a > 0x0000 > Doneany help would be great
Thanks
Claude
-
@claude-hurtubise
can you try pressing the MCU_RESET button and runningi2cdetect -y 0on the command line right after?post the output of the command and we can debug further from there
-
Thanks for your reply
this is what I get after executing the follwoing, i2cdetect -y 0
root@Omega-0B03:~# i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77
root@Omega-0B03:~#
