Guide to cross compilation for Omega2 ?

[Kit Bishop]

@WereCatf Thanks- yes that's probably what I'll do

For the original Omega, I also built the toolchain for the ar71xx from the repository at git://git.openwrt.org/15.05/openwrt.git as referenced in https://wiki.onion.io/Tutorials/Cross-Compile
I also made the toolchain and available for others at https://github.com/KitBishop/Omega-ToolChain-SDK

I will probably do the same for the MT7688 once I find the equivalent repository for LEDE - if you have a reference for this it would help and be much appreciated

[WereCatf]

@Kit-Bishop I uploaded the toolchain from my custom build of LEDE at https://dl.dropboxusercontent.com/u/11811685/lede-toolchain-ramips-mt7688_gcc-5.4.0_musl-1.1.15.Linux-x86_64.tar.bz2

[Kit Bishop]

@WereCatf Thanks for that

I have found what I believe to be the LEDE repository (https://github.com/Juiceman/apm82181-lede) and have cloned it and am in the process of building an image and the toolchain myself.

I note that the toolchain you listed in your message uses musl whereas the toolchain I previously had for the AR71XX for the original Omega uses uClibc

Do you know which should be used for the Omega2 (still don't have mine yet so can't check yet :-() Do you know if it matters?

[Pedro Peña]

@Kit-Bishop According to https://lede-project.org/downloads, LEDE repositories are https://git.lede-project.org/source.git and https://github.com/lede-project/source

[Kit Bishop]

@Pedro-Peña Thanks - after some digging and advice from @WereCatf I am now using https://git.lede-project.org/source.git

[Pedro Peña]

@Kit-Bishop yes, i saw the other thread after i wrote that

[Luciano S.]

@Kit-Bishop said in Guide to cross compilation for Omega2 ?:

@Pedro-Peña Thanks - after some digging and advice from @WereCatf I am now using https://git.lede-project.org/source.git

To open correctly

[Steven de Salas]

Anyone had any success with this?

OPKG is missing serialport npm module for nodejs and was thinking of trying to build it myself.

Thanks.

[Denys Makogon]

@simon with recent Go 1.8 release i was able to compile and run code (mux simple server) on my MacBook Pro late '15. So, there's no need to have gccgo toolchain or whatever you've need before.
Take a look at this https://github.com/denismakogon/OnionIoT-Omega2

[José Luis Cánovas]

@Denys-Makogon It was so subtle the line where you indicate the cross-compilation I missed it the first 2 reads. Nice cross-compilation from Go.