npm coming to Omega2+?
Given Omega2+ increased memory and storage, are there plans to make npm available for this more powerful device at some point?
Maybe this will put you in the right track right away:
You can replace OnionOS by LEDE if need be (with some restrictions at the moment).
I installed npm on my Omega2+. I connected to it via SSH and ran the following commands:
opkg update opkg install npm
There is also a
@fossette I don't think thats the same LEDE project as https://lede-project.org/ which I think is what you were talking about.
Brian Robbins last edited by Brian Robbins
//after running opkg update
root@Omega-XXXX:/# opkg install npm Installing npm (v4.3.1-1) to root... Downloading http://repo.onion.io/omega2/packages/npm_v4.3.1-1_mipsel_24kc.ipk. Installing nodejs (v4.3.1-1) to root... Downloading http://repo.onion.io/omega2/packages/nodejs_v4.3.1-1_mipsel_24kc.ipk. Collected errors: * check_data_file_clashes: Package nodejs wants to install file /usr/bin/node But that file is already provided by package * node * opkg_install_cmd: Cannot install package npm. root@Omega-XXXX:/# npm -v Assertion failed: (sk_num(((_STACK*) (1 ? (comp_methods) : (struct stack_st_SSL_COMP*)0)))) == (0) (../src/node_crypto.cc: InitCryptoOnce: 5482) Aborted root@Omega-XXXX:/#
//so I tried nodejs - after removing node
root@Omega-XXXX:/# opkg install nodejs Installing nodejs (v4.3.1-1) to root... Downloading http://repo.onion.io/omega2/packages/nodejs_v4.3.1-1_mipsel_24kc.ipk. Configuring nodejs. root@Omega-XXXX:/# node -v v4.3.1 root@Omega-XXXX:/# npm -v /bin/ash: npm: not found root@Omega-XXXX:/# opkg install npm Installing npm (v4.3.1-1) to root... Downloading http://repo.onion.io/omega2/packages/npm_v4.3.1-1_mipsel_24kc.ipk. Configuring npm. root@Omega-XXXX:/# npm -v 2.14.12
//so it appears you need to install nodejs rather than node to get a compatible npm
But there's then so precious little file space left to do anything! Maybe when the sdcard gets implemented that can be used??
@Brian-Robbins Even without the sd card working (it's a shame that there seems to be problems with this in a new product :-() there are ways you can give yourself more space using a USB memory drive:
- Create a swap file that will give you more virtual memory - for the Omega2 see https://docs.onion.io/omega2-docs/extending-omega-memory.html for how to do this
- Use the USB for storage as rootfs that will extend the disk space available - see https://wiki.onion.io/Tutorials/Using-USB-Storage-as-Rootfs for details - while this documentation specifically relates to the original Omega, I would suspect that it would work equally well for the Omega2 (I haven't tried it myself yet for the Omega2 since I'm still waiting for it to arrive)
Both of these techniques work well on the original Omega
Thanks for your info. I first formatted the USB drive as EXT4, then set up the swap, then extroot with pivot-overlay (I failed at first when I tried to install the overlay then the swap), and after installing nodejs and npm:
root@Omega-8735:/# node -v v4.3.1 root@Omega-8735:/# npm -v 2.14.12 root@Omega-XXXX:/# free total used free shared buffers cached Mem: 125644 73296 52348 476 5804 44188 -/+ buffers/cache: 23304 102340 Swap: 524284 0 524284 root@Omega-XXXX:/# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 5632 5632 0 100% /rom tmpfs 62820 476 62344 1% /tmp /dev/mtdblock6 25664 18928 6736 74% /overlay overlayfs:/overlay 25664 18928 6736 74% / tmpfs 512 0 512 0% /dev /dev/sda1 14991780 585056 13625464 4% /mnt/sda1
Wow! However.... I keep getting the following error message in attempting to npm install modules:
npm ERR! nospc ENOSPC: no space left on device, open 'npm-debug.log.8946ac5ac8ea2c880858146fc2425020' npm ERR! nospc This is most likely not a problem with npm itself npm ERR! nospc and is related to insufficient space on your system.
How can this be with all that additional memory and space? Is another step required?
@Brian-Robbins From the information you provide, my guess would be that you have an issue with your
After setting up the USB drive for
pivot-overlaydid you run
block detect > /etc/config/fstaband edit the resulting
/etc/config/fstabfile as described in Step 4 in https://wiki.onion.io/Tutorials/Using-USB-Storage-as-Rootfs
If you like, you could send me or post a copy of your
/etc/config/fstabfile and I will take a look at it
Brian Robbins last edited by Brian Robbins
Thanks for helping! Here is my /etc/config/fstab:
config global option anon_swap '0' option anon_mount '0' option auto_swap '1' option auto_mount '1' option delay_root '5' option check_fs '0' config mount option target '/mnt/sda1' option uuid 'e74b8398-1f14-44cd-b25b-d7e11f87796a' option enabled '1'
and the file is "unwritable"
root@Omega-8735:/# root@Omega-8735:/# block detect > /etc/config/fstab /bin/ash: can't create /etc/config/fstab: Read-only file system
Kit Bishop last edited by Kit Bishop
@Brian-Robbins This is strange - not what I would have expected. I think there may be some relevant differences between the original Omega and Omega2 particularly in relation to the read only status of
/etc/config/fstabwhich is a fairly important configuaration file - unfortunately I am still waiting for my Omega2 to arrive so can't test it out yet.
In the original Omega set up for swap and pivot-overlay, there would be 2
config mountentries in
/etc/config/fstab- one for the swap partition and one for the pivot-overlay partition. Also, the pivot-overlay partition should be mounted on
You could try using the following commands to change the mount point for what I believe to be you pivot-overlay partition:
uci set fstab.@mount.target='/overlay' uci commit fstab
and reboot your Omega
But if I'm wrong, it could potentially cause problems and I am reluctant to recommended it without having tried it myself.
Just to check what
block detectthinks the
fstabfile should be you could just run:
block detect > ~/fstab-check
and send the resultant
~/fstab-checkfile for me to look at.
If there really are significant differences with the Omega2, it would really help if the Omega devs could publish an up to date version of https://wiki.onion.io/Tutorials/Using-USB-Storage-as-Rootfs specifically for the Omega2
Again thanks for helping.
root@Omega-XXXX:/# block detect > ~/fstab-check /bin/ash: can't create /root/fstab-check: Read-only file system
and pardon my ignorance, I'm used to seeing /bin/bash not bin/ash
@Brian-Robbins This is strange. Using:
block detect > ~/fstab-check
should have just output to a file in your home directory. Can you create files in
~/OK? If not, there is some other issue with your system that I really don't understand. Are you sure you are logged on to your Omega as root?
You could just try:
to output to the screen and let me know what the result is.
/bin/ashis basically a smaller, more compact version of
/bin/bashand for most basic operations operates the same
I gave up and booted to failsafe and did a factory reset. Just doesn't seem worth the trouble. I figure I'll put this onion aside for awhile until and if the bugs get cleared up................
Thanks for helping and your time!
You can install bash if you wish like this:
opkg update opkg install bash
@TheLion Yes - but have never really needed it
Ahh - true enough. I replied to the wrong person - was supposed to be a reply to Brian..
ash is a smaller version than bash.. There's no B in it for a start...!
In relation to using pivot-overlay (and/or pivot-root) on the Omega2 to get more system disk space using a USB drive (or SD card?), see my recent post https://community.onion.io/topic/1295/more-system-disk-space-using-pivot-overlay-and-pivot-root-on-the-omega2