DHT 22 Sensor does not Work :/

[MultiDJRoni]

@WereCatf Hmm, i tried a different Breadboard, re arranged the Cables etc. and i still get an error

[WereCatf]

@MultiDJRoni I would like to help, but I don't know what's wrong. I know it works fine for me, so the error isn't in the code.

[MultiDJRoni]

@WereCatf hmm Well anyways thanks for trying to help me

[Alexander Nedzelsky]

Dropbox link is no longer valid. Does someone have working bins for Omega2?
Thanks!

[Brian Taylor]

I am also looking for this. Hopefully someone has the file and can re-upload it. Thanks!

[Felipe Cespedes]

Any updates about this?

[Sebastian Gabbert]

I am looking to, any hints?

[Andres Esteban Puert Lara]

Maybe if you use an arduino as interface between sensor and omega2, arduino libraries work very well and then trough UART you can pass the values to omega and read serial port with PHP or python., i was tryinig to adapt this python code (http://www.uugear.com/portfolio/dht11-humidity-temperature-sensor-module/) from raspberry PI to omega2 changing respective GPIO libraries without succes, so i decide implement arduino interface. https://ibb.co/evW87k

[h0l0gram]

This post is deleted!

[h0l0gram]

Hi all
Good news. I migrated original code successfully to work on Omega2!
See https://github.com/h0l0gram/omega2-checkHumidity for binary and source.

Make sure your Omega2 has firmware >=0.1.10 b160 or it won't work.

root@Omega-1234:~# oupgrade -c
> Device Firmware Version: 0.1.10 b160
> Checking latest version online...
> Repo Firmware Version: 0.1.10 b160
> Comparing version numbers
> Device firmware is up to date!
root@Omega-1234:~# 

See https://docs.onion.io/omega2-docs/using-the-omega-updating.html

[Lazar Demin]

@h0l0gram PSA: wiki.onion.io is documentation from the original Omega1 days!

See docs.onion.io for our shiny, brand new documentation.

For updating, see: https://docs.onion.io/omega2-docs/using-the-omega-updating.html

[Andy Burgess]

@MultiDJRoni ,
The picture of the connections show the wires on one side and the sensor on the other side of the breadboard. These lines usually don't connect across the middle. IE it is an open circuit, so you can place an IC in the middle. Try connecting it all on one side.

[cas]

This post is deleted!

[Andrew Bialock]

@h0l0gram Thank you for the excellent conversion code for checkhumidity. It works great for me. The only issue I am having is that if the DHT22 sensor is plugged into the Omega before the omega is turned on, the omega won't boot. I have to disconnect the sensor to gt the omega2 to boot.

Has anyone else seen this?

[cas]

@Andrew-Bialock Which gpio are you using for the data? Is it one of the ones required to boot (1,6,7,8,12,45) ?