Disable AP and set static IP
-
The output to traceroute is in there. It says 'Network unreachable'.
I just tried setting static ip to 192.168.5.186 and that also does NOT work.
-
@drmoeder I'm asking for the output of the "route" command, not "traceroute"
-
Oh sorry my mistake.
root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
And with dhcp:
round-trip min/avg/max = 19.924/24.932/32.018 ms root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.5.254 0.0.0.0 UG 0 0 0 apcli0 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder As I expected there is no default route, so you need to add one, add to your network configuration:
option gateway '192.168.5.254'
option netmask '255.255.240.0'
-
I thought I had done that. Am I missing something?
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' option ipaddr '192.168.5.186' option proto 'static' config interface 'wan' option ifname 'eth0' option proto 'dhcp'
-
@drmoeder Add the following to your /etc/config/network
config route 'default'
option interface 'wwan'
option gateway '192.168.5.254'
option target '0.0.0.0'
option netmask '0.0.0.0'
option metric '0'Then restart.
-
Still no luck.
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option gateway '192.168.5.254' option netmask '255.255.240.0' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option target '0.0.0.0' option netmask '0.0.0.0' option metric '0' root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ping: sendto: Network unreachable
-
@drmoeder try this:
ip route add default via 192.168.5.254 dev apcli0
ip route get 8.8.8.8
ping 8.8.8.8
-
That worked!
root@Omega-3DA9:/etc/config# ip route add default via 192.168.5.254 dev apcli0 root@Omega-3DA9:/etc/config# ip route get 8.8.8.8 8.8.8.8 via 192.168.5.254 dev apcli0 src 192.168.5.88 root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: seq=0 ttl=117 time=21.440 ms 64 bytes from 8.8.8.8: seq=1 ttl=117 time=21.110 ms 64 bytes from 8.8.8.8: seq=2 ttl=117 time=24.762 ms 64 bytes from 8.8.8.8: seq=3 ttl=117 time=30.374 ms 64 bytes from 8.8.8.8: seq=4 ttl=117 time=39.886 ms ^C --- 8.8.8.8 ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 21.110/27.514/39.886 ms root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.5.254 0.0.0.0 UG 0 0 0 apcli0 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder ok but it will stop working when you restart the network, please post your entire /etc/config/network file
-
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option target '0.0.0.0' option netmask '0.0.0.0' option metric '0'
-
@drmoeder In the default route, remove target and netmask options. Then use service network restart or reboot and check your routing table again.
-
Not working with those options removed.
root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan root@Omega-3DA9:/# cd etc/config root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option metric '0' root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ping: sendto: Network unreachable root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder hmmm not sure why this is not updating the routing table, perhaps someone else has an idea. But here is a workaround for you as I'm going to be offline for the next 24 hours so this will fix the issue for you.
Put this script in /etc/hotplug.d/iface/40-wwan-up-route:
#!/bin/sh
TARGET_INTERFACE="wwan"logger -t route "Starting interface hotplug device: ${DEVICE} Action: ${ACTION} Interface: ${INTERFACE}"
if [ "$ACTION" = "ifup" -a "$INTERFACE" = "$TARGET_INTERFACE" ]; then
logger -t route "IFUP ${DEVICE}"
/sbin/ip route add default via 192.168.5.254 dev "${DEVICE}" >/dev/nullfi
This scripts runs whenever the interface comes up and adds the route. I just wrote this for you based on another of my scripts so give it a test and let me know how you go. As you can see it logs the activity so if you have any issues post those log entries.
-
That didn't work.
And I don't know where to retrieve the log from.
It didn't show up in the command line output
-
logread | grep -i route | less
-
Thu Feb 29 14:01:54 2024 user.notice route: Starting interface hotplug device: l o Action: ifup Interface: loopback Thu Feb 29 14:02:07 2024 user.notice route: Starting interface hotplug device: b r-wlan Action: ifup Interface: wlan Thu Feb 29 14:02:09 2024 user.notice route: Starting interface hotplug device: a pcli0 Action: ifup Interface: wwan Thu Feb 29 14:02:09 2024 user.notice route: IFUP apcli0 Thu Feb 29 14:05:00 2024 user.notice route: Starting interface hotplug device: Action: ifdown Interface: loopback Thu Feb 29 14:05:01 2024 user.notice route: Starting interface hotplug device: Action: ifdown Interface: wlan Thu Feb 29 14:05:01 2024 user.notice route: Starting interface hotplug device: Action: ifdown Interface: wwan Thu Feb 29 14:05:08 2024 user.notice route: Starting interface hotplug device: l o Action: ifup Interface: loopback Thu Feb 29 14:05:09 2024 user.notice route: Starting interface hotplug device: a pcli0 Action: ifup Interface: wwan Thu Feb 29 14:05:09 2024 user.notice route: IFUP apcli0 Thu Feb 29 14:05:10 2024 user.notice route: Starting interface hotplug device: b r-wlan Action: ifup Interface: wlan
-
@drmoeder It seems that the routing configurations are not being read by the wifi system. I tried it on OpenWrt 22 and it works fine by placing routing entries in /etc/config/network. My guess is the issue is in the Warp driver but it;s closed source so it's just an assumption.
The hotplug script I provided earlier is adding the route, but it's getting cleared out after network finishes loading.
I found a workaround that works, but I'm not in love with it, it creates the required default route when you restart the device, but if you just restart the network the route is removed.
Here is my entry in /etc/config/network, set your own ip's:
config interface 'wwan'
option ifname 'apcli0'
option proto 'static'
option ipaddr '192.168.1.85'
option netmask '255.255.255.0'
option gateway '192.168.1.1'
option hostname 'Omega-1FE3'Then you need to add 2 lines to /etc/rc.local:
sleep 15
/sbin/ip route add default via 192.168.5.254 dev apcli0Another options may be to use dhcp but set an IP reservation on your router (if you can),
-
I appreciate all your help with this.
I understand the implications of this workaround and I realized this workaround also after the one command worked.
I can get by with this for now, but it would be nice to have a cleaner resolution to this