I Can't Access Omega2 Consule

Trina

I many issues before I could get the setup wizard to work. Now that I think I have it setup properly, I can't access the Consule... http://wwww.omega-ABCD.local. I'm left with a blank web-page, and omega-ABCD.local in the URL. I need help. Thank you.

Luciano S.

@Trina-Bradley , try the ip address ... if you not changed it it would be 192.168.3.1

BTW. i don't know if this is just a matter of formatting here in the community, or you really tried wwww. before the Omega-ABCD.local?! If yes try without.

Is it really complete blank the page?

Andy Burgess

Hi I had similar issues
Try a different browser, IE won't work for me but Firefox will.
Chrome wouldn't work on one PC but does on another.

I'm using 149 firmware.

Good luck Andy

Luciano S.

@Andy-Burgess said in I Can't Access Omega2 Consule:

Try a different browser,

This is a good idea i forgot to mention, just the Requester wrote before he was able ... So i suspect after upgrade the console is not there anymore ... has to be reinstalled ... see documentation.

Chris Stratton

@Trina-Bradley said in I Can't Access Omega2 Consule:

I many issues before I could get the setup wizard to work. Now that I think I have it setup properly, I can't access the Consule... http://wwww.omega-ABCD.local. I'm left with a blank web-page, and omega-ABCD.local in the URL. I need help. Thank you.

add /console to the url

Giovanni Gentile

@Trina-Bradley Are you connected to the board?
Try by using your browser 192.168.3.1

Trina

@Giovanni-Gentile
Thank for you assistance... to everyone.

My experince so far with the Omega2... iffy on contecting to the web, to its console, to its cloud...

I was able to access the Consule last night using the ssh @root omega-ABCD.local... I think. I say I think because after I typed the command above.... I was able to access Omega2 GUI./Cloud using the omega-ABCD.local in the URL. Today its another matter... I can't access anything.

P.S. My Omega2 plus is connected to a Macbook Air.

Daren Tremblay

i have same issue

Luciano S.

The command is ssh root@omega-ABCD.local

Trina

@Giovanni-Gentile

Thank you that worked! I only hope and pray it work tomorrow and thereafter.

Trina

I have some more questions...

Should I always access the Omega2 Consule and Cloud via the IP address and/or http://omega-ABCD.local/? Should I be able to access the web and surf with either option? I ask because now I see my Routers SSID Network name pop in a side square. Thank you for your assistance.