Switch Off not work
-
Can I switch off the board in a good version?
I can put off the power cable, but I want close all the process before.
I can try
power-down -f
but not work.
-
There is no powerdown capability and never has been; however there is hang-on-reset bug in the 2+ that in its older form where it could be triggered by software as well as hardware reset used to sort of look like one.
What would be effective would be a good software halt.
-
@Chris-Stratton said in Switch Off not work:
What would be effective would be a good software halt.
Is this not good enough? LEDE makes it this way:
root@Omega-####:/sbin# poweroff root@Omega-####:/sbin# [ 4097.555023] reboot: System haltedLED is off.
-
@Luciano-S. Yes, the LED is off.
But unfortunately the current consumption is ~65-70 mA (at least on my O2+). Maybe the MT7688 freezes and the state of the RAM, FLASH, etc. is not determined.
Additional similar states of Omega2+:
- This is my pet
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 8701d944
Rebooting in 3 seconds..
- Hardware Reset - when the RST pin goes to LOW
(eg. via a momentary push button to the GND).
Update
Chris Stratton taught me to understand, my problems are related to Omega2+ only.
Please forget it if you are talking about Omega or Omega2.
- This is my pet