need help using Arduino Dock
-
Hi,
I'm really enjoying your product.
I was able to do the initial setup for the arduino dockthe following was the result
root@Omega-0B03:~# sh /usr/bin/arduino-dock flash bootloader > Flashing bootloader... avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e950f avrdude: erasing chip avrdude: reading input file "0x3f" avrdude: writing lock (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of lock written avrdude: verifying lock memory against 0x3f: avrdude: load data lock data from input file 0x3f: avrdude: input file 0x3f contains 1 bytes avrdude: reading on-chip lock data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lock verified avrdude: reading input file "0x05" avrdude: writing efuse (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of efuse written avrdude: verifying efuse memory against 0x05: avrdude: load data efuse data from input file 0x05: avrdude: input file 0x05 contains 1 bytes avrdude: reading on-chip efuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of efuse verified avrdude: reading input file "0xDA" avrdude: writing hfuse (1 bytes): Writing | ################################################## | 100% 0.01s avrdude: 1 bytes of hfuse written avrdude: verifying hfuse memory against 0xDA: avrdude: load data hfuse data from input file 0xDA: avrdude: input file 0xDA contains 1 bytes avrdude: reading on-chip hfuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of hfuse verified avrdude: reading input file "0xFF" avrdude: writing lfuse (1 bytes): Writing | ################################################## | 100% 0.00s avrdude: 1 bytes of lfuse written avrdude: verifying lfuse memory against 0xFF: avrdude: load data lfuse data from input file 0xFF: avrdude: input file 0xFF contains 1 bytes avrdude: reading on-chip lfuse data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lfuse verified avrdude done. Thank you. avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e950f avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "/usr/share/arduino-dock/twibootloader.hex" avrdude: input file /usr/share/arduino-dock/twibootloader.hex auto detected as Intel Hex avrdude: writing flash (31808 bytes): Writing | ################################################## | 100% 1.19s avrdude: 31808 bytes of flash written avrdude: verifying flash memory against /usr/share/arduino-dock/twibootloader.hex: avrdude: load data flash data from input file /usr/share/arduino-dock/twibootloader.hex: avrdude: input file /usr/share/arduino-dock/twibootloader.hex auto detected as Intel Hex avrdude: input file /usr/share/arduino-dock/twibootloader.hex contains 31808 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 1.14s avrdude: verifying ... avrdude: 31808 bytes of flash verified avrdude: reading input file "0x0f" avrdude: writing lock (1 bytes): Writing | ################################################## | 100% 0.01s avrdude: 1 bytes of lock written avrdude: verifying lock memory against 0x0f: avrdude: load data lock data from input file 0x0f: avrdude: input file 0x0f contains 1 bytes avrdude: reading on-chip lock data: Reading | ################################################## | 100% 0.00s avrdude: verifying ... avrdude: 1 bytes of lock verified avrdude: safemode: Fuses OK (E:05, H:DA, L:FF) avrdude done. Thank you. > Done root@Omega-0B03:~# ------------------------------------------------now trying to to flash the blink2 example I get an memsize error, not sure how to proceed, any suggestion
would be appropriated, Thanks> Flashing application 'blink2.hex' ... device : /dev/i2c-0 (address: 0x29) version : (sig: 0x00 0x00 0x00 => unknown) flash size : 0x0000 / 0 (0x00 bytes/page) eeprom size : 0x0000 / 0 invalid memsize: 0x0c8a > 0x0000 > Done
-
@claude-hurtubise which method are you using to flash the sketch? Also, what is the LED on the Arduino Dock doing?
-
I used the second method "using the Omega" because I was not seeing the Omega in the port menu in the Arduino IDE.
The yellow led on the Arduino board is flashing very slowly all the time.Thanks
Claude
-
I tried re flashing the arduino dock again, that seem to have work, I get in trouble once I try flashing the blink2 sketch, using the second method, because I'm not seeing the Omega in the port menu in the Arduino IDE
Flashing application 'blink2.hex' ...
device : /dev/i2c-0 (address: 0x29)
version : (sig: 0x00 0x00 0x00 => unknown)
flash size : 0x0000 / 0 (0x00 bytes/page)
eeprom size : 0x0000 / 0
invalid memsize: 0x0c8a > 0x0000
Done
