1. Home
  2. Omega Talk
  3. New OS Release!

New OS Release!

  • M

    @Swapnil-Katpally It tells you so in the bootup banner. Do cat /etc/banner.

    root@Omega-17FD:~# cat /etc/banner
   ____       _             ____
  / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
 / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
 \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
 W H A T  W I L L  Y O U  I N V E N T ? /___/
 -----------------------------------------------------
   Ω-ware: 0.2.0 b176
 -----------------------------------------------------

    Also check

    root@Omega-17FD:~# oupgrade --check --latest
> Device Firmware Version: 0.2.0 b176
> Checking latest version online...
> Repo Firmware Version: 0.2.0 b176
> Comparing version numbers
> Device firmware is up to date!
    1
  • M

    This post is deleted!
    0
  • B

    This post is deleted!
    0 Lazar Demin 1 Reply
  • T NT

    Ok so I flashed this to my OO2P and as I had nothing to lose also factory reset it with firstboot -y

    So I was a little surprised when I say a segfault on restart to do with the SPI driver.

    [ 11.542654] spidev spi32766.1: buggy DT: spidev listed directly in DT
    [ 11.549271] ------------[ cut here ]------------
    [ 11.553970] WARNING: CPU: 0 PID: 486 at drivers/spi/spidev.c:720 0x8768833c()
    [ 11.561222] Modules linked in: spidev(+) snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core mt_wifi ralink_gdma virt_dma ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 cryptomgr aead crypto_null crc32c_generic crypto_hash
    [ 11.666647] CPU: 0 PID: 486 Comm: kmodloader Not tainted 4.4.74 #0
    [ 11.672911] Stack : 80380780 00000000 00000001 803d0000 87dab4d4 803cae63 80361c18 000001e6
    [ 11.672911] 80413438 0000000c 0000001a 024000c0 80066378 8004af58 80367120 803c0000
    [ 11.672911] 00000003 0000000c 80365524 875a7b4c 80066378 80048ec4 00000000 00000000
    [ 11.672911] 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    [ 11.672911] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    [ 11.672911] ...
    [ 11.709089] Call Trace:
    [ 11.711629] [<80066378>] module_sect_show+0x0/0x18
    [ 11.716513] [<8004af58>] vprintk_default+0x24/0x30
    [ 11.721390] [<80066378>] module_sect_show+0x0/0x18
    [ 11.726268] [<80048ec4>] printk+0x2c/0x38
    [ 11.730352] [<8002552c>] warn_slowpath_common+0xa0/0xd0
    [ 11.735683] [<8014de3c>] dump_stack+0x14/0x28
    [ 11.740106] [<80014908>] show_stack+0x50/0x84
    [ 11.744524] [<8002552c>] warn_slowpath_common+0xa0/0xd0
    [ 11.749843] [<8768833c>] 0x8768833c
    [ 11.753403] [<800255e4>] warn_slowpath_null+0x18/0x24
    [ 11.758560] [<801fb304>] of_match_node+0x20/0x44
    [ 11.763272] [<8768833c>] 0x8768833c
    [ 11.766846] [<801c0a10>] devm_kfree+0x20/0x44
    [ 11.771285] [<801e1bd8>] spi_drv_probe+0x3c/0x84
    [ 11.775994] [<801bd540>] driver_probe_device+0x120/0x288
    [ 11.781405] [<8008b928>] kstrdup+0x44/0x8c
    [ 11.785589] [<801e1ad8>] spi_match_device+0x38/0xa8
    [ 11.790567] [<801bd724>] __driver_attach+0x7c/0xb4
    [ 11.795442] [<801bb948>] next_device+0x10/0x30
    [ 11.799959] [<801bd6a8>] __driver_attach+0x0/0xb4
    [ 11.804746] [<801bba04>] bus_for_each_dev+0x9c/0xac
    [ 11.809706] [<80303c9c>] klist_add_tail+0x24/0x50
    [ 11.814484] [<801bb7d8>] bus_get+0x2c/0x50
    [ 11.818679] [<801bcc38>] bus_add_driver+0xec/0x20c
    [ 11.823549] [<800ae92c>] exact_match+0x0/0x8
    [ 11.827899] [<800aee34>] exact_lock+0x0/0x24
    [ 11.832253] [<801bde3c>] driver_register+0xa8/0xf8
    [ 11.837133] [<8775a000>] init_module+0x0/0xdc [spidev]
    [ 11.842387] [<8775a098>] init_module+0x98/0xdc [spidev]
    [ 11.847711] [<80159a08>] kasprintf+0x1c/0x28
    [ 11.852061] [<800458b0>] __wake_up+0x24/0x48
    [ 11.856412] [<8775a000>] init_module+0x0/0xdc [spidev]
    [ 11.861646] [<8000d938>] do_one_initcall+0x1e8/0x214
    [ 11.866709] [<800458b0>] __wake_up+0x24/0x48
    [ 11.871046] [<8775a000>] init_module+0x0/0xdc [spidev]
    [ 11.876291] [<80034568>] call_usermodehelper_exec+0x144/0x160
    [ 11.882138] [<80034058>] call_usermodehelper_setup+0x38/0xa8
    [ 11.887922] [<80066378>] module_sect_show+0x0/0x18
    [ 11.892805] [<80067598>] do_init_module+0x74/0x1cc
    [ 11.897700] [<8009f418>] __vunmap+0xf0/0x114
    [ 11.902076] [<80068e2c>] load_module+0x16c0/0x1b68
    [ 11.906958] [<80066964>] unknown_module_param_cb+0x0/0xac
    [ 11.912443] [<8009f90c>] __vmalloc_node+0x34/0x40
    [ 11.917260] [<80069368>] SyS_init_module+0x94/0x180
    [ 11.922213] [<80069404>] SyS_init_module+0x130/0x180
    [ 11.927293] [<8000682c>] syscall_common+0x30/0x54
    [ 11.932077] [<80008c58>] __bzero+0xbc/0x164
    [ 11.936331]
    [ 11.937846] ---[ end trace d1d675f9648aa3a7 ]---

    I was also surprised when the promised better performing 'Warp Core' driver did not seem connect to any of my networks. In fact it kept on saying it connected but there was no internet. A blatant falsehood given that my laptop I was using to login via the Serial console was working fine on the same access points.

    Anyway of debugging what is going on? If i cannot connect to wifi then not sure how I will ever fix a problem on it again.

    0
  • J

    ERROR: Could not connect to Onion Firmware Server! Check your internet connection and try again!

    Connected via serial or SSH.
    Definitely have internet connection, can perform update, upgrade, install.
    Possibly issue in connecting with Firmware Server, will try again later.

    0
  • J

    Had to do manual download and install.
    link text

    0
  • J

    Installed new firmware omega2p-v0.2.0-b176.bin on 2+.
    Discovers WiFi but will not connect?

    0
  • J

    wifisetup not working?

    root@Omega-35EB:~# wifisetup
    Onion Omega Wifi Setup

    Select from the following:

    1. Scan for Wifi networks
    2. Type network info
      q) Exit

    Selection: sh: 1: unknown operand
    sh: 2: unknown operand
    Bye!

    I'm relatively new to this, but what is going on?

    0 G T NT 2 Replies
  • G

    @John_L You should simply hit the 1 (or the 2) key.
    It seems you typed the sh: 1 (or the sh: 2) text instead.

    0
  • T NT

    @John_L

    I noticed in my one the wifisetup script used uci set wireless.radio0.. when of course the device is actuall ra0 now.

    That fixed that problem.. but still cannot get it to connect to any of my wifi AP's,

    bizarre.

    0
  • J

    @György-Farkas said in New OS Release!:

    (It seems you typed the sh: 1 (or the sh: 2) text instead.

    NO, I only typed wifisetup and return and was not given a chance to enter selection, rest of output was generated by Omega.

    0
  • J

    @T-NT said in New OS Release!:

    I noticed in my one the wifisetup script used uci set wireless.radio0.. when of course the device is actuall ra0 now.

    But if you look at wireless script in /etc/config , option device is 'radio0' for both ap and sta interface. AP interface seems to work as I can connect and log onto Omega WiFi directly.
    But I can't get STA interface to work to connect to my WiFi router AP?

    In quick start web interface setup, Omega scans and detects my external WiFi router and AP's , but will not connect?

    Then tried terminal wifisetup and will not let me make menu selection, see previous post.

    Looks like I'm not alone with WiFi connection issue?????

    0
  • Lazar Demin
    administrators

    @Brian-Kaisner installation of the new OS will wipe the previous wireless configuration,
    please try running wifisetup and configuring your Omega to connect to your network

    @T-NT regarding SPI, it's not a segfault, rather a very loud complaint, see this for more details: https://github.com/raspberrypi/linux/issues/1054

    Can you post the output of uci show wireless, ifconfig, and iwconfig? That will give some more insight into what's going on.

    @John_L What you're describing is symptomatic of still having the older wifi programs but the new driver. I would say your best bet forward is to back-up anything you don't want to lose from that Omega to a USB and perform a factory reset.
    This will setup your Omega with only the b176 files and you should be good to go. Let me know how it goes!

    0
  • J

    Thanks Lazar,
    No problem, will try factory reset, have over 50 omega 2+ to play with.
    Will let you know how it goes.

    0
  • J

    OK, sorted out wifisetup. Was using TeraTerm terminal on Win-7 and had CR+LF set as Return/Enter. Fixed by deleting LF and only sends CR after Return/Enter key.

    Still no joy in connecting to my local WiFi router that works with previous firmware version.
    Have tried Factory Reset on previously used Omega 2+ and number of new units with previous fresh firmware out of the box.

    Anyway new firmware flashed is omega2p-v0.2.0-b176.bin. Not sure if this is region dependent regarding WiFi channels, I am in Australia?

    After scanning and selecting local WiFi without encryption for this exercise. this is the listing of wireless file in /etc/config

    config wifi-device 'radio0'
    option type 'ralink'
    option variant 'mt7628'
    option country 'US'
    option hwmode '11g'
    option htmode 'HT40'
    option channel 'auto'
    option disabled '0'
    option device_mode 'apsta'
    option op_mode 'preference'

    config wifi-iface 'ap'
    option device 'radio0'
    option mode 'ap'
    option network 'wlan'
    option ifname 'ra0'
    option encryption 'psk2'
    option key '12345678'
    option disabled '0'
    option ssid 'Omega-C0B5'

    config wifi-iface 'sta'
    option device 'radio0'
    option mode 'sta'
    option ifname 'apcli0'
    option encryption 'psk2'
    option ssid 'YourSsidHere'
    option key 'YourPasswordHere'
    option network 'wwan'
    option disabled '0'

    config wifi-config
    option key 'none'
    option ssid 'RR2'
    option encryption 'none'

    config wifi-config is added to the bottom of the script file as above with correct WiFi ssid and no encryption.
    Not sure if config wifi-iface 'sta' should have been filled in with my WiFi setting, it is in fact unchanged from factory reset?

    Below is the output after running wifi command.

    root@Omega-C0B5:/etc/config# wifi
    root@Omega-C0B5:/etc/config# [ 947.402706] br-wlan: port 1(ra0) entered disabled state
    [ 947.441399] device ra0 left promiscuous mode
    [ 947.445912] br-wlan: port 1(ra0) entered disabled state
    [ 947.486297] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
    [ 947.793368]
    [ 947.793368] _ _____ ___ ___ _________ ___ ____
    [ 947.793368] | | /| / / _ | / _ / _ \ / / __ / _ / / V1.0
    [ 947.793368] | |/ |/ / __ |/ , _/ / / // // / , _/ _/
    [ 947.793368] |    /|    /    / |//|// _/_//|/__/
    [ 947.793368] Onion Enhanced MT7688 WiFi Driver
    [ 947.793368]
    [ 947.968677] DMA Scheduler Mode=0(LMAC)
    [ 947.972528] efuse_probe: efuse = 10000012
    [ 947.976690] 1. Phy Mode = 14
    [ 948.142871] 2. Phy Mode = 14
    [ 948.145897] 3. Phy Mode = 14
    [ 948.149182] WTBL Segment 1 info:
    [ 948.152547] MemBaseAddr/FID:0x28000/0
    [ 948.156475] EntrySize/Cnt:32/128
    [ 948.159921] WTBL Segment 2 info:
    [ 948.163280] MemBaseAddr/FID:0x40000/0
    [ 948.167213] EntrySize/Cnt:64/128
    [ 948.170663] WTBL Segment 3 info:
    [ 948.174030] MemBaseAddr/FID:0x42000/64
    [ 948.178021] EntrySize/Cnt:64/128
    [ 948.181468] WTBL Segment 4 info:
    [ 948.184843] MemBaseAddr/FID:0x44000/128
    [ 948.188906] EntrySize/Cnt:32/128
    [ 954.943390] device ra0 entered promiscuous mode
    [ 954.948238] br-wlan: port 1(ra0) entered forwarding state
    [ 954.953754] br-wlan: port 1(ra0) entered forwarding state
    [ 954.960267] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
    [ 956.944594] br-wlan: port 1(ra0) entered forwarding state

    My knowledge is not up to speed with what should be the correct output?

    Anyway, looking for suggestions why omega 2+ doesn't connect or is not seen by my local wifi router?

    0
  • J

    This is the main difference between the new V2 firmware and previous firmware when trying to connect to local WiFi.

    Output from previous firmware that connects to local WiFi:

    [ 149.529421] br-wlan: port 2(ra0) entered forwarding state
    [ 149.534954] br-wlan: port 2(ra0) entered forwarding state
    [ 151.528355] br-wlan: port 2(ra0) entered forwarding state
    [ 155.384737] !!! APCLI LINK UP - IF(apcli0) AuthMode(0)=OPEN, WepStatus(1)=NONE!

    Output from new V2 firmware that DOESN'T connect.

    [ 374.591028] br-wlan: port 1(ra0) entered forwarding state
    [ 374.596616] br-wlan: port 1(ra0) entered forwarding state
    [ 374.603060] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
    [ 376.594605] br-wlan: port 1(ra0) entered forwarding state

    Then it just hangs there!!!!

    I don't have enough knowledge on how it all works but.
    Is this the actual connection to WiFi running old firmware?

    [ 155.384737] !!! APCLI LINK UP - IF(apcli0) AuthMode(0)=OPEN, WepStatus(1)=NONE!

    0
  • J

    After spending more than half a day reading forum posts that don't relate much to new firmware with new wifi interface and playing with different options. No luck in connecting to Dlink DSL-2900AL wireless router. Although can connect with previous 1.9-b.159 firmware using gui web interface without any other configuration modifications.

    Since I have number of Omega 2+'s and old firmware can connect to Dlink router, I tried to eliminate direct connection to Dlink router and connect via Omega 2 with 159 firmware that is connected to Dlink . SUCCESS, sort of.

    I can connect to Dlink router and local WIFi network through Omega with old firmware but don't have Internet access yet.

    I guess more research and reading what is the difference between Dlink router AP and Omega AP with old firmware? Also how to get to Internet? This is suppose to be easy beginner friendly module?

    Update .
    Have modified firewall settings in Omega connected to Dlink and use it as "Range extender" with internet access available.

    Omega with new firmware connected to Omega as range extender works unreliably with internet access. Can ping Internet IP for a little while and then it stops, have to reset WiFi (wifi command) to get internet access again. opkg update DOSN'T work "opkg_download: Failed to download..........opkg_download: Check your network settings and connectivity"

    Omega with old firmware as range extender appears to have good internet access through Dlink wifi router, pings OK, opkg update works fine.

    ?? More troubleshooting or may just forget about new firmware until it becomes more stable.

    0 Lazar Demin 1 Reply
  • Lazar Demin
    administrators

    @John_L the new firmware won't show a message like !!! APCLI LINK UP - IF(apcli0) AuthMode(0)=OPEN, WepStatus(1)=NONE!
    That's something we'll look into adding.

    The sta part of the /etc/config/wireless won't get populated until wifi is run so no worries on that front.

    Can you try connecting to a different router, maybe one with a WPA2 password?
    Also, to debug, it would be helpful if you posted the output of the following commands: ifconfig, iwconfig, uci show wireless

    0
  • J

    Using new 2.0b176 firmware. Tried but unable to connect to Dlink DSL-2900AL wifi router via gui webpage interface. Can connect this way to same router with previous 1.9b159 firmware.

    Have been able to connect to Dlink router via another Omega with old 1.9b159 firmware as repeater , but internet connection cuts out after small throughput of data such as only 8 iterations of external internet IP pings. Then need to run wifi (on Omega with new firmware) to reset wifi interface and can repeat this without reliable success. Actually, wifi connection to Omega repeater cuts out and need wifi reset.

    Have not tried yet to connect directly to Dlink router with encryption, don't have time now.

    Below are outputs as requested for setup using new firmware to connect directly to Dlink wifi router, but unsuccessful!

    root@Omega-C59B:/# ifconfig
    br-wlan Link encap:Ethernet HWaddr 40:A3:6B:C1:C5:9B
    inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
    inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
    inet6 addr: fe80::42a3:6bff:fec1:c59b/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1867 errors:0 dropped:0 overruns:0 frame:0
    TX packets:807 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:420342 (410.4 KiB) TX bytes:77435 (75.6 KiB)

    eth0 Link encap:Ethernet HWaddr 40:A3:6B:C1:C5:9B
    inet6 addr: fe80::42a3:6bff:fec1:c59b/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:36447 (35.5 KiB)
    Interrupt:5

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:596 errors:0 dropped:0 overruns:0 frame:0
    TX packets:596 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1
    RX bytes:35676 (34.8 KiB) TX bytes:35676 (34.8 KiB)

    ra0 Link encap:Ethernet HWaddr 40:A3:6B:C1:C5:9B
    inet6 addr: fe80::42a3:6bff:fec1:c59b/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:5406 errors:2 dropped:0 overruns:0 frame:0
    TX packets:2817 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1251013 (1.1 MiB) TX bytes:1071065 (1.0 MiB)
    Interrupt:6

    iwconfig

    root@Omega-C59B:/# iwconfig
    lo no wireless extensions.

    ra0 RTWIFI SoftAP ESSID:"Omega-C59B"
    Mode:Managed Channel=6 Access Point: 40:A3:6B:C1:C5:9B
    Bit Rate=150 Mb/s

    eth0 no wireless extensions.

    br-wlan no wireless extensions.

    apcli0 RTWIFI SoftAP ESSID:""
    Mode:Managed Channel=6 Access Point: Not-Associated
    Bit Rate:150 Mb/s

    uci show wireless

    root@Omega-C59B:/# uci show wireless
    wireless.radio0=wifi-device
    wireless.radio0.type='ralink'
    wireless.radio0.variant='mt7628'
    wireless.radio0.country='US'
    wireless.radio0.hwmode='11g'
    wireless.radio0.htmode='HT40'
    wireless.radio0.channel='auto'
    wireless.radio0.disabled='0'
    wireless.radio0.device_mode='apsta'
    wireless.radio0.op_mode='preference'
    wireless.ap=wifi-iface
    wireless.ap.device='radio0'
    wireless.ap.mode='ap'
    wireless.ap.network='wlan'
    wireless.ap.ifname='ra0'
    wireless.ap.encryption='psk2'
    wireless.ap.key='12345678'
    wireless.ap.disabled='0'
    wireless.ap.ssid='Omega-C59B'
    wireless.sta=wifi-iface
    wireless.sta.device='radio0'
    wireless.sta.mode='sta'
    wireless.sta.ifname='apcli0'
    wireless.sta.encryption='psk2'
    wireless.sta.ssid='YourSsidHere'
    wireless.sta.key='YourPasswordHere'
    wireless.sta.network='wwan'
    wireless.sta.disabled='0'
    wireless.@wifi-config[0]=wifi-config
    wireless.@wifi-config[0].key='none'
    wireless.@wifi-config[0].ssid='RR2'
    wireless.@wifi-config[0].encryption='none'

    0
  • G

    Omega2+ v0.2.0 b176, clean state after FACTORY RESET, serial Console

    It's trying to connect to an old Android (Jelly Bean 4.1.2) mobil Wi-Fi hotspot.
    Encryption: WPA2 PSK

    Commands:
    date
    ifconfig, iwconfig
    cat /etc/config/wireless, uci show wireless
    iwinfo ra0 scan
    wifisetup
    logread (the last lines only)

    root@Omega-5BE1:/# date
Sat Mar 31 11:00:30 GMT 2018

root@Omega-5BE1:/# ifconfig
apcli0    Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E2  
          inet6 addr: fe80::42a3:6bff:fec0:5be2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

br-wlan   Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E1  
          inet addr:192.168.3.1  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
          inet6 addr: fe80::42a3:6bff:fec0:5be1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:4119 (4.0 KiB)

eth0      Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E3  
          inet6 addr: fe80::42a3:6bff:fec0:5be3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:27011 (26.3 KiB)
          Interrupt:5 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:212 errors:0 dropped:0 overruns:0 frame:0
          TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:12772 (12.4 KiB)  TX bytes:12772 (12.4 KiB)

ra0       Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E1  
          inet6 addr: fe80::42a3:6bff:fec0:5be1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:6 

root@Omega-5BE1:/# iwconfig
lo        no wireless extensions.

ra0       RTWIFI SoftAP  ESSID:"Omega-5BE1"  
          Mode:Managed  Channel=3  Access Point: 40:A3:6B:C0:5B:E1   
          Bit Rate=150 Mb/s   
          
eth0      no wireless extensions.

br-wlan   no wireless extensions.

apcli0    RTWIFI SoftAP  ESSID:""  
          Mode:Managed  Channel=3  Access Point: Not-Associated   
          Bit Rate:150 Mb/s   
          
root@Omega-5BE1:/# cat /etc/config/wireless

config wifi-device 'radio0'
	option type 'ralink'
	option variant 'mt7628'
	option country 'US'
	option hwmode '11g'
	option htmode 'HT40'
	option channel 'auto'
	option disabled '0'
	option device_mode 'apsta'
	option op_mode 'preference'

config wifi-iface 'ap'
	option device 'radio0'
	option mode 'ap'
	option network 'wlan'
	option ifname 'ra0'
	option encryption 'psk2'
	option key '12345678'
	option disabled '0'
	option ssid 'Omega-5BE1'

config wifi-iface 'sta'
	option device 'radio0'
	option mode 'sta'
	option ifname 'apcli0'
	option encryption 'psk2'
	option ssid 'YourSsidHere'
	option key 'YourPasswordHere'
	option network 'wwan'
	option disabled '1'

root@Omega-5BE1:/# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='ralink'
wireless.radio0.variant='mt7628'
wireless.radio0.country='US'
wireless.radio0.hwmode='11g'
wireless.radio0.htmode='HT40'
wireless.radio0.channel='auto'
wireless.radio0.disabled='0'
wireless.radio0.device_mode='apsta'
wireless.radio0.op_mode='preference'
wireless.ap=wifi-iface
wireless.ap.device='radio0'
wireless.ap.mode='ap'
wireless.ap.network='wlan'
wireless.ap.ifname='ra0'
wireless.ap.encryption='psk2'
wireless.ap.key='12345678'
wireless.ap.disabled='0'
wireless.ap.ssid='Omega-5BE1'
wireless.sta=wifi-iface
wireless.sta.device='radio0'
wireless.sta.mode='sta'
wireless.sta.ifname='apcli0'
wireless.sta.encryption='psk2'
wireless.sta.ssid='YourSsidHere'
wireless.sta.key='YourPasswordHere'
wireless.sta.network='wwan'
wireless.sta.disabled='1'

root@Omega-5BE1:/# iwinfo ra0 scan
Cell 01 - Address: 40:65:A3:EC:52:7E
          ESSID: "Telekom-ec5278"
          Mode: Master  Channel: 1
          Signal: -256 dBm  Quality: 162/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 02 - Address: E8:40:F2:F7:40:15
          ESSID: "371d9c"
          Mode: Master  Channel: 1
          Signal: -256 dBm  Quality: 175/100
          Encryption: WPA2 PSK (TKIP, AES-OCB)

Cell 03 - Address: 58:90:43:6A:5C:76
          ESSID: "Telekom-6a5c70"
          Mode: Master  Channel: 1
          Signal: -256 dBm  Quality: 165/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 04 - Address: 9C:74:1A:EA:17:CC
          ESSID: "DIGI-dE3Y"
          Mode: Master  Channel: 1
          Signal: -256 dBm  Quality: 188/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 05 - Address: 84:16:F9:D5:DB:35
          ESSID: "Atifi"
          Mode: Master  Channel: 2
          Signal: -256 dBm  Quality: 186/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 06 - Address: 40:7D:0F:95:FB:48
          ESSID: "DIGI-2X4h"
          Mode: Master  Channel: 4
          Signal: -256 dBm  Quality: 160/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 07 - Address: 0C:71:5D:CE:64:DD
          ESSID: "sam"
          Mode: Master  Channel: 6
          Signal: -256 dBm  Quality: 211/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 08 - Address: 04:27:58:33:44:60
          ESSID: "botaszi"
          Mode: Master  Channel: 10
          Signal: -256 dBm  Quality: 187/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 09 - Address: E8:DE:27:D5:DA:88
          ESSID: "TP-LINK_D5DA88"
          Mode: Master  Channel: 10
          Signal: -256 dBm  Quality: 172/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 10 - Address: 04:27:58:34:0C:D0
          ESSID: "DIGI-sDkQ"
          Mode: Master  Channel: 11
          Signal: -256 dBm  Quality: 166/100
          Encryption: WPA2 PSK (AES-OCB)

Cell 11 - Address: 78:96:82:72:EA:A1
          ESSID: "Rv1"
          Mode: Master  Channel: 11
          Signal: -256 dBm  Quality: 162/100
          Encryption: WPA2 PSK (TKIP, AES-OCB)

root@Omega-5BE1:/# wifisetup
Onion Omega Wifi Setup

Select from the following:
1) Scan for Wifi networks
2) Type network info
q) Exit

Selection: 1
Scanning for wifi networks...

Select Wifi network:
1) 371d9c
2) DIGI-dE3Y
3) Telekom-6a5c70
4) 8b99f0
5) Atifi
6) DIGI-2X4h
7) Cica-Net
8) sam
9) DIGI-82Qd
10) botaszi
11) TP-LINK_D5DA88
12) Flip-ad21d0
13) DIGI-sDkQ

Selection: 8
Network: sam
Encryption type: psk2
Enter password: MyPassword

> Restarting wifimanager for changes to take effect
root@Omega-5BE1:/# [  285.685099] br-wlan: port 1(ra0) entered disabled state
[  285.703662] device ra0 left promiscuous mode
[  285.708176] br-wlan: port 1(ra0) entered disabled state
[  285.746284] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
[  287.926629] device ra0 entered promiscuous mode
[  287.931379] br-wlan: port 1(ra0) entered forwarding state
[  287.936970] br-wlan: port 1(ra0) entered forwarding state
[  287.943576] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
[  289.934609] br-wlan: port 1(ra0) entered forwarding state

root@Omega-5BE1:/# ifconfig
apcli0    Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E2  
          inet addr:192.168.43.82  Bcast:192.168.43.255  Mask:255.255.255.0
          inet6 addr: fe80::42a3:6bff:fec0:5be2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

br-wlan   Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E1  
          inet addr:192.168.3.1  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
          inet6 addr: fe80::42a3:6bff:fec0:5be1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:4423 (4.3 KiB)

eth0      Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E3  
          inet6 addr: fe80::42a3:6bff:fec0:5be3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:150 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:46505 (45.4 KiB)
          Interrupt:5 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:452 errors:0 dropped:0 overruns:0 frame:0
          TX packets:452 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:28596 (27.9 KiB)  TX bytes:28596 (27.9 KiB)

ra0       Link encap:Ethernet  HWaddr 40:A3:6B:C0:5B:E1  
          inet6 addr: fe80::42a3:6bff:fec0:5be1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:6 

root@Omega-5BE1:/# iwconfig
lo        no wireless extensions.

ra0       RTWIFI SoftAP  ESSID:"Omega-5BE1"  
          Mode:Managed  Channel=6  Access Point: 40:A3:6B:C0:5B:E1   
          Bit Rate=150 Mb/s   
          
eth0      no wireless extensions.

br-wlan   no wireless extensions.

apcli0    RTWIFI SoftAP  ESSID:"sam"  
          Mode:Managed  Channel=6  Access Point: 0C:71:5D:CE:64:DD   
          Bit Rate=150 Mb/s   
          
root@Omega-5BE1:/# cat /etc/config/wireless

config wifi-device 'radio0'
	option type 'ralink'
	option variant 'mt7628'
	option country 'US'
	option hwmode '11g'
	option htmode 'HT40'
	option channel 'auto'
	option disabled '0'
	option device_mode 'apsta'
	option op_mode 'preference'

config wifi-iface 'ap'
	option device 'radio0'
	option mode 'ap'
	option network 'wlan'
	option ifname 'ra0'
	option encryption 'psk2'
	option key '12345678'
	option disabled '0'
	option ssid 'Omega-5BE1'

config wifi-iface 'sta'
	option device 'radio0'
	option mode 'sta'
	option ifname 'apcli0'
	option encryption 'psk2'
	option network 'wwan'
	option disabled '0'
	option key 'MyPassword'
	option ssid 'sam'

config wifi-config
	option key 'MyPassword'
	option ssid 'sam'
	option encryption 'psk2'

root@Omega-5BE1:/# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='ralink'
wireless.radio0.variant='mt7628'
wireless.radio0.country='US'
wireless.radio0.hwmode='11g'
wireless.radio0.htmode='HT40'
wireless.radio0.channel='auto'
wireless.radio0.disabled='0'
wireless.radio0.device_mode='apsta'
wireless.radio0.op_mode='preference'
wireless.ap=wifi-iface
wireless.ap.device='radio0'
wireless.ap.mode='ap'
wireless.ap.network='wlan'
wireless.ap.ifname='ra0'
wireless.ap.encryption='psk2'
wireless.ap.key='12345678'
wireless.ap.disabled='0'
wireless.ap.ssid='Omega-5BE1'
wireless.sta=wifi-iface
wireless.sta.device='radio0'
wireless.sta.mode='sta'
wireless.sta.ifname='apcli0'
wireless.sta.encryption='psk2'
wireless.sta.network='wwan'
wireless.sta.disabled='0'
wireless.sta.key='MyPassword'
wireless.sta.ssid='sam'
wireless.@wifi-config[0]=wifi-config
wireless.@wifi-config[0].key='MyPassword'
wireless.@wifi-config[0].ssid='sam'
wireless.@wifi-config[0].encryption='psk2'


root@Omega-5BE1:/# logread     
...
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Interface ra0.IPv6 no longer relevant for mDNS.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Leaving mDNS multicast group on interface ra0.IPv6 with address fe80::42a3:6bff:fec0:5be1.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for fe80::42a3:6bff:fec0:5be1 on ra0.
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Network device 'ra0' link is down
Sat Mar 31 11:02:09 2018 daemon.notice netifd: bridge 'br-wlan' link is down
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' has link connectivity loss
Sat Mar 31 11:02:09 2018 kern.info kernel: [  285.685099] br-wlan: port 1(ra0) entered disabled state
Sat Mar 31 11:02:09 2018 daemon.notice netifd: radio0 (2125): uci: Entry not found
Sat Mar 31 11:02:09 2018 kern.info kernel: [  285.703662] device ra0 left promiscuous mode
Sat Mar 31 11:02:09 2018 kern.info kernel: [  285.708176] br-wlan: port 1(ra0) entered disabled state
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' is now down
Sat Mar 31 11:02:09 2018 daemon.info odhcpd[950]: Raising SIGUSR1 due to address change on br-wlan
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Registering new address record for fe80::42a3:6bff:fec0:5be1 on br-wlan.*.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for 192.168.3.1 on br-wlan.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Leaving mDNS multicast group on interface br-wlan.IPv4 with address 192.168.3.1.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Interface br-wlan.IPv4 no longer relevant for mDNS.
Sat Mar 31 11:02:09 2018 daemon.info odhcpd[950]: Raising SIGUSR1 due to address change on br-wlan
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Interface br-wlan.IPv6 no longer relevant for mDNS.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Leaving mDNS multicast group on interface br-wlan.IPv6 with address fd1d:48c4:7633::1.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for fe80::42a3:6bff:fec0:5be1 on br-wlan.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for fd1d:48c4:7633::1 on br-wlan.
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' is disabled
Sat Mar 31 11:02:09 2018 kern.info kernel: [  285.746284] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' is enabled
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' is setting up now
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface br-wlan.IPv4 with address 192.168.3.1.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: New relevant interface br-wlan.IPv4 for mDNS.
Sat Mar 31 11:02:09 2018 daemon.info avahi-daemon[1311]: Registering new address record for 192.168.3.1 on br-wlan.IPv4.
Sat Mar 31 11:02:09 2018 daemon.notice netifd: Interface 'wlan' is now up
Sat Mar 31 11:02:09 2018 daemon.info odhcpd[950]: Raising SIGUSR1 due to address change on br-wlan
Sat Mar 31 11:02:09 2018 daemon.notice netifd: radio0 (2149): Interface doesn't accept private ioctl...
Sat Mar 31 11:02:09 2018 daemon.notice netifd: radio0 (2149): set (8BE2): Invalid argument
Sat Mar 31 11:02:10 2018 user.notice firewall: Reloading firewall due to ifup of wlan (br-wlan)
Sat Mar 31 11:02:10 2018 daemon.notice netifd: radio0 (2149): killall: ap_client: no process killed
Sat Mar 31 11:02:10 2018 kern.info ap_client: - wait interval set to 8
Sat Mar 31 11:02:10 2018 kern.info ap_client: - rssi threshold set to 0
Sat Mar 31 11:02:10 2018 kern.info ap_client: - max low signal count set to 0
Sat Mar 31 11:02:10 2018 kern.info ap_client: starting assoc_loop in preference mode (opMode = 0)
Sat Mar 31 11:02:10 2018 kern.info ap_client: 'apcli0' assoc: no, mac: 00:00:00:00:00:00
Sat Mar 31 11:02:10 2018 kern.info ap_client: Scanning for networks...
Sat Mar 31 11:02:10 2018 daemon.info odhcpd[950]: Using a RA lifetime of 0 seconds on br-wlan
Sat Mar 31 11:02:10 2018 daemon.notice odhcpd[950]: Failed to send to ff02::1%br-wlan (Address not available)
Sat Mar 31 11:02:11 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface ra0.IPv6 with address fe80::42a3:6bff:fec0:5be1.
Sat Mar 31 11:02:11 2018 daemon.info avahi-daemon[1311]: New relevant interface ra0.IPv6 for mDNS.
Sat Mar 31 11:02:11 2018 daemon.info avahi-daemon[1311]: Registering new address record for fe80::42a3:6bff:fec0:5be1 on ra0.*.
Sat Mar 31 11:02:11 2018 daemon.notice netifd: Network device 'ra0' link is up
Sat Mar 31 11:02:11 2018 kern.info kernel: [  287.926629] device ra0 entered promiscuous mode
Sat Mar 31 11:02:11 2018 kern.info kernel: [  287.931379] br-wlan: port 1(ra0) entered forwarding state
Sat Mar 31 11:02:11 2018 kern.info kernel: [  287.936970] br-wlan: port 1(ra0) entered forwarding state
Sat Mar 31 11:02:11 2018 kern.info kernel: [  287.943576] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
Sat Mar 31 11:02:11 2018 daemon.notice netifd: bridge 'br-wlan' link is up
Sat Mar 31 11:02:11 2018 daemon.notice netifd: Interface 'wlan' has link connectivity 
Sat Mar 31 11:02:11 2018 daemon.notice netifd: radio0 (2149): uci: Entry not found
Sat Mar 31 11:02:12 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface br-wlan.IPv6 with address fd1d:48c4:7633::1.
Sat Mar 31 11:02:12 2018 daemon.info avahi-daemon[1311]: New relevant interface br-wlan.IPv6 for mDNS.
Sat Mar 31 11:02:12 2018 daemon.info avahi-daemon[1311]: Registering new address record for fd1d:48c4:7633::1 on br-wlan.*.
Sat Mar 31 11:02:12 2018 daemon.info odhcpd[950]: Using a RA lifetime of 0 seconds on br-wlan
Sat Mar 31 11:02:13 2018 kern.info kernel: [  289.934609] br-wlan: port 1(ra0) entered forwarding state
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 0:  6 sam 0c:71:5d:ce:64:dd WPA2PSK -45
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 1:  1 DIGI-dE3Y 9c:74:1a:ea:17:cc WPA1PSKWPA2PSK -62
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 2:  2 Atifi 84:16:f9:d5:db:35 WPA2PSK -68
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 3:  10 botaszi 04:27:58:33:44:60 WPA1PSKWPA2PSK -73
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 4:  1 371d9c e8:40:f2:f7:40:15 WPA1PSKWPA2PSK -83
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 5:  4 Cica-Net 04:9f:ca:77:31:0c WPA1PSKWPA2PSK -95
Sat Mar 31 11:02:15 2018 kern.info ap_client: network 6:  4 DIGI-2X4h 40:7d:0f:95:fb:48 WPA1PSKWPA2PSK -95
Sat Mar 31 11:02:15 2018 daemon.info avahi-daemon[1311]: Interface apcli0.IPv6 no longer relevant for mDNS.
Sat Mar 31 11:02:15 2018 daemon.info avahi-daemon[1311]: Leaving mDNS multicast group on interface apcli0.IPv6 with address fe80::42a3:6bff:fec0:5be2.
Sat Mar 31 11:02:15 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for fe80::42a3:6bff:fec0:5be2 on apcli0.
Sat Mar 31 11:02:15 2018 daemon.notice netifd: Network device 'apcli0' link is down
Sat Mar 31 11:02:15 2018 daemon.notice netifd: Interface 'wwan' has link connectivity loss
Sat Mar 31 11:02:15 2018 daemon.notice netifd: wwan (1190): udhcpc: read error: Network is down, reopening socket
Sat Mar 31 11:02:15 2018 kern.info ap_client: Found configured network, trying to associate (essid: sam, bssid: 0c:71:5d:ce:64:dd, channel: 6, enc: WPA2PSK, crypto: PA2PSK)
Sat Mar 31 11:02:15 2018 daemon.notice netifd: wwan (1190): udhcpc: received SIGTERM
Sat Mar 31 11:02:16 2018 daemon.notice netifd: Network device 'apcli0' link is up
Sat Mar 31 11:02:16 2018 daemon.notice netifd: Interface 'wwan' has link connectivity 
Sat Mar 31 11:02:16 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Sat Mar 31 11:02:16 2018 daemon.notice netifd: wwan (2391): udhcpc: started, v1.25.1
Sat Mar 31 11:02:16 2018 daemon.notice netifd: wwan (2391): udhcpc: sending discover
Sat Mar 31 11:02:17 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface apcli0.IPv6 with address fe80::42a3:6bff:fec0:5be2.
Sat Mar 31 11:02:17 2018 daemon.info avahi-daemon[1311]: New relevant interface apcli0.IPv6 for mDNS.
Sat Mar 31 11:02:17 2018 daemon.info avahi-daemon[1311]: Registering new address record for fe80::42a3:6bff:fec0:5be2 on apcli0.*.
Sat Mar 31 11:02:19 2018 daemon.notice netifd: wwan (2391): udhcpc: sending discover
Sat Mar 31 11:02:22 2018 daemon.notice netifd: wwan (2391): udhcpc: sending discover
Sat Mar 31 11:02:24 2018 kern.info ap_client: 'apcli0' assoc: no, mac: 00:00:00:00:00:00
Sat Mar 31 11:02:24 2018 kern.info ap_client: Scanning for networks...
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 0:  6 sam 0c:71:5d:ce:64:dd WPA2PSK -45
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 1:  1 DIGI-dE3Y 9c:74:1a:ea:17:cc WPA1PSKWPA2PSK -66
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 2:  2 Atifi 84:16:f9:d5:db:35 WPA2PSK -67
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 3:  10 botaszi 04:27:58:33:44:60 WPA1PSKWPA2PSK -74
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 4:  1 371d9c e8:40:f2:f7:40:15 WPA1PSKWPA2PSK -79
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 5:  1 Telekom-6a5c70 58:90:43:6a:5c:76 WPA2PSK -89
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 6:  11 Flip-ad21d0 24:7f:20:ad:21:d6 WPA2PSK -89
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 7:  10 TP-LINK_D5DA88 e8:de:27:d5:da:88 WPA1PSKWPA2PSK -91
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 8:  11 DIGI-sDkQ 04:27:58:34:0c:d0 WPA1PSKWPA2PSK -92
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 9:  9 Ivan 7c:39:53:fc:df:5f WPA1PSKWPA2PSK -94
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 10:  5 DIGI-82Qd 3c:78:43:45:58:4c WPA1PSKWPA2PSK -96
Sat Mar 31 11:02:29 2018 kern.info ap_client: network 11:  1 Telekom-ec5278 40:65:a3:ec:52:7e WPA2PSK -96
Sat Mar 31 11:02:29 2018 daemon.info avahi-daemon[1311]: Interface apcli0.IPv6 no longer relevant for mDNS.
Sat Mar 31 11:02:29 2018 daemon.info avahi-daemon[1311]: Leaving mDNS multicast group on interface apcli0.IPv6 with address fe80::42a3:6bff:fec0:5be2.
Sat Mar 31 11:02:29 2018 daemon.info avahi-daemon[1311]: Withdrawing address record for fe80::42a3:6bff:fec0:5be2 on apcli0.
Sat Mar 31 11:02:29 2018 daemon.notice netifd: Network device 'apcli0' link is down
Sat Mar 31 11:02:29 2018 daemon.notice netifd: Interface 'wwan' has link connectivity loss
Sat Mar 31 11:02:29 2018 daemon.notice netifd: wwan (2391): udhcpc: read error: Network is down, reopening socket
Sat Mar 31 11:02:29 2018 kern.info ap_client: Found configured network, trying to associate (essid: sam, bssid: 0c:71:5d:ce:64:dd, channel: 6, enc: WPA2PSK, crypto: AES)
Sat Mar 31 11:02:29 2018 daemon.notice netifd: wwan (2391): udhcpc: received SIGTERM
Sat Mar 31 11:02:29 2018 daemon.notice netifd: Network device 'apcli0' link is up
Sat Mar 31 11:02:29 2018 daemon.notice netifd: Interface 'wwan' has link connectivity 
Sat Mar 31 11:02:29 2018 daemon.notice netifd: Interface 'wwan' is setting up now
Sat Mar 31 11:02:29 2018 daemon.notice netifd: wwan (2421): udhcpc: started, v1.25.1
Sat Mar 31 11:02:29 2018 daemon.notice netifd: wwan (2421): udhcpc: sending discover
Sat Mar 31 11:02:31 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface apcli0.IPv6 with address fe80::42a3:6bff:fec0:5be2.
Sat Mar 31 11:02:31 2018 daemon.info avahi-daemon[1311]: New relevant interface apcli0.IPv6 for mDNS.
Sat Mar 31 11:02:31 2018 daemon.info avahi-daemon[1311]: Registering new address record for fe80::42a3:6bff:fec0:5be2 on apcli0.*.
Sat Mar 31 11:02:32 2018 daemon.notice netifd: wwan (2421): udhcpc: sending discover
Sat Mar 31 11:02:35 2018 daemon.notice netifd: wwan (2421): udhcpc: sending select for 192.168.43.82
Sat Mar 31 11:02:35 2018 daemon.notice netifd: wwan (2421): udhcpc: lease of 192.168.43.82 obtained, lease time 3600
Sat Mar 31 11:02:35 2018 daemon.info avahi-daemon[1311]: Joining mDNS multicast group on interface apcli0.IPv4 with address 192.168.43.82.
Sat Mar 31 11:02:35 2018 daemon.info avahi-daemon[1311]: New relevant interface apcli0.IPv4 for mDNS.
Sat Mar 31 11:02:35 2018 daemon.info avahi-daemon[1311]: Registering new address record for 192.168.43.82 on apcli0.IPv4.
Sat Mar 31 11:02:35 2018 daemon.notice netifd: Interface 'wwan' is now up
Sat Mar 31 11:02:35 2018 daemon.info dnsmasq[1304]: reading /tmp/resolv.conf.auto
Sat Mar 31 11:02:35 2018 daemon.info dnsmasq[1304]: using local addresses only for domain lan
Sat Mar 31 11:02:35 2018 daemon.info dnsmasq[1304]: using nameserver 192.168.43.1#53
Sat Mar 31 11:02:35 2018 user.notice firewall: Reloading firewall due to ifup of wwan (apcli0)
Sat Mar 31 11:02:36 2018 daemon.info odhcpd[950]: Using a RA lifetime of 0 seconds on br-wlan
Sat Mar 31 11:02:37 2018 kern.info ap_client: 'apcli0' assoc: yes, mac: 0c:71:5d:ce:64:dd
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[1304]: exiting on receipt of SIGTERM
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: started, version 2.77 cachesize 150
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: DNS service limited to local subnets
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq-dhcp[2515]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: using local addresses only for domain lan
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: reading /tmp/resolv.conf.auto
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: using local addresses only for domain lan
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: using nameserver 192.168.43.1#53
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: read /etc/hosts - 4 addresses
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: read /tmp/hosts/odhcpd - 0 addresses
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq[2515]: read /tmp/hosts/dhcp.cfg02411c - 0 addresses
Sat Mar 31 11:02:37 2018 daemon.info dnsmasq-dhcp[2515]: read /etc/ethers - 0 addresses
Sat Mar 31 11:02:42 2018 kern.info ap_client: 'apcli0' assoc: yes, mac: 0c:71:5d:ce:64:dd
Sat Mar 31 11:02:43 2018 daemon.info dnsmasq[2515]: read /etc/hosts - 4 addresses
Sat Mar 31 11:02:43 2018 daemon.info dnsmasq[2515]: read /tmp/hosts/odhcpd - 0 addresses
Sat Mar 31 11:02:43 2018 daemon.info dnsmasq[2515]: read /tmp/hosts/dhcp.cfg02411c - 0 addresses
Sat Mar 31 11:02:43 2018 daemon.info dnsmasq-dhcp[2515]: read /etc/ethers - 0 addresses
Sat Mar 31 11:02:50 2018 kern.info ap_client: 'apcli0' assoc: yes, mac: 0c:71:5d:ce:64:dd
Sat Mar 31 11:02:58 2018 kern.info ap_client: 'apcli0' assoc: yes, mac: 0c:71:5d:ce:64:dd
Sat Mar 31 11:03:06 2018 kern.info ap_client: 'apcli0' assoc: yes, mac: 0c:71:5d:ce:64:dd

    OK! 🙂

    to be continued...

    0 G 1 Reply
firmware 108 announcement 27 os 13 release 9
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.