problems with the o2lte command

Nate

@Marko-Lukat
That did indeed help thank you. Honestly I wasn't quite sure what the thinking was making the extra call to lted-run in the first place just to do those two commands. I just figured I was missing something.

@Lazar-Demin Can we get a fix for this and a firmware update please? Seems like we don't get firmware updates as often as I would have thought.
With the current firmware, if I have a SIM card in the board, when I boot it the cellular interface is up on it's own. Running o2lte data disable doesn't turn it off. I have to bring down the interface manually, remove the default route manually and add a new default route pointing back to the network gateway. It's very frustrating.

Nate

I'm also having issues controlling the gnss on this board.

Firstly, the enable / disable of o2lte doesn't seem to do anything at all. gnss is active on device boot and disable doesn't seem to stop it.

Furthermore /etc/init.d/ugps does seem to work as far as ubus call gps info is concerned however regardless of it's enabled or not I can always do cat /dev/ttyUSB1 which the documentation implies should not work if /etc/init.d/ugps is enabled.

Marko Lukat

@Nate said in problems with the o2lte command:

I'm also having issues controlling the gnss on this board.

Firstly, the enable / disable of o2lte doesn't seem to do anything at all. gnss is active on device boot and disable doesn't seem to stop it.

Been there as well ... (a friend of mine keeps me on my toes, he is doing real-life testing, I fix the stuff). Disabling doesn't work because it's the wrong command (AT+QGPS=0 doesn't exist), use AT+QGPSEND instead.

Note, if for whatever reasons you use a terminal with the modem chip (e.g. miniterm.py /dev/ttyUSB2) the terminal settings are all screwed up on exit so the o2lte script stops working completely for GNSS (basically line end translation is off). In this case use something like stty -F /dev/ttyUSB2 sane to reset the terminal.

Furthermore /etc/init.d/ugps does seem to work as far as ubus call gps info is concerned however regardless of it's enabled or not I can always do cat /dev/ttyUSB1 which the documentation implies should not work if /etc/init.d/ugps is enabled.

IIRC there is no way opening a device exclusively. Users of said device have to cooperate on this one. But yes, the documentation is misleading here.

Nate

@Marko-Lukat Thanks so much that did indeed fix it. Are there any other gotcha's you've learned with this board that someone should be aware of if they are trying to use it in a real project? Thanks so much.

@Lazar-Demin I hope we can get a fixed firmware for everyone else?

Marko Lukat

@Nate So far everything runs as expected. If I stumble across something new I'll report it. Thanks!

Lazar Demin

@Nate said in problems with the o2lte command:

I hope we can get a fixed firmware for everyone else?

Definitely! Please submit a PR on GitHub.
The code for the omega2-lte-base package (which includes the o2lte script) can be found here: https://github.com/OnionIoT/OpenWRT-Packages/tree/openwrt-18.06/omega2-lte

We've added a readme to make it easy to figure out what's what.

@Marko-Lukat said in problems with the o2lte command:

IIRC there is no way opening a device exclusively. Users of said device have to cooperate on this one. But yes, the documentation is misleading here.

How can we improve the documentation to make this more clear?

Marko Lukat

@Lazar-Demin I raised two issue on github for o2lte and lted (#36, #37), where can I find the documentation wrt the NMEA reading issue?

Lazar Demin

@Marko-Lukat We'll take a look.
Submitting a Pull Request will definitely result in a quicker turnaround time! Please submit a Pull Request for the proposed lted changes!

And can you clarify which NMEA reading issue you're referring to?

Marko Lukat

@Lazar-Demin said in problems with the o2lte command:

Submitting a Pull Request will definitely result in a quicker turnaround time! Please submit a Pull Request for the proposed lted changes!

Fair enough, will do.

And can you clarify which NMEA reading issue you're referring to?

You asked me how the documentation can be improved wrt having ugps running and accessing /dev/ttyUSB1 at the same time. So I was wondering where these documentation bits are kept (assuming they are in git somewhere).

Lazar Demin

PRs have been merged! Thanks for contributing!

How to update your Omega2 LTE

Option 1: Update a Software Package

To get the updates, you can update just the omega2-lte-base package to install the latest 1.0.2 version. Make sure you're connected to the internet and run:

opkg update
opkg upgrade omega2-lte-base_1.0.0

Option 2: Firmware Update

Or you can update the firmware of your Omega2 LTE.

Make sure you're connected to the internet and run:

oupgrade -l -f

What does this fix?

Two things:

Can properly disable GNSS scanning (current consumption will drop about 20~30mA @ 5V)
When the lted service is stopped, the modem will actually stop the cellular data connection

@Marko-Lukat re the Omega2 LTE Guide:
This guide is hosted on our website, it's not on GitHub.
Let us know if there are any changes that you would like us to make!