Omega2 WiFi



  • Omega2 first time setup does not connect to wifi, either through browser or ssh or terminal. Firmware version O-ware: 0.3.2 b232.
    On terminal wifisetup shows
    Select Wifi network:

    1. ASP_NET
    2. DIRECT-XIMMCPL-AJITmsZQ

    Selection: 1
    Network: ASP_NET
    Encryption type: wep
    Enter password: 98220

    Restarting wifimanager for changes to take effect
    root@Omega-97A8:/# [ 354.120284] br-wlan: port 1(ra0) entered disabled state
    [ 354.822271] device ra0 left promiscuous mode
    [ 354.826766] br-wlan: port 1(ra0) entered disabled state
    [ 354.981723] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
    [ 355.483547]
    [ 355.483547] _ _____ ___ ___ _________ ___ ____
    [ 355.483547] | | /| / / _ | / _ / _ \ / / __ / _ / / V1.1
    [ 355.483547] | |/ |/ / __ |/ , _/ / / // // / , _/ _/
    [ 355.483547] |
    /|
    /
    / |//|// _/_//|/__/
    [ 355.483547] Onion Enhanced MT7688 WiFi Driver
    [ 355.483547]
    [ 355.710768] DMA Scheduler Mode=0(LMAC)
    [ 355.714599] efuse_probe: efuse = 10000012
    [ 355.718717] 1. Phy Mode = 14
    [ 355.888973] 2. Phy Mode = 14
    [ 355.891977] 3. Phy Mode = 14
    [ 355.895205] WTBL Segment 1 info:
    [ 355.898569] MemBaseAddr/FID:0x28000/0
    [ 355.902509] EntrySize/Cnt:32/128
    [ 355.905957] WTBL Segment 2 info:
    [ 355.909312] MemBaseAddr/FID:0x40000/0
    [ 355.913218] EntrySize/Cnt:64/128
    [ 355.916662] WTBL Segment 3 info:
    [ 355.920033] MemBaseAddr/FID:0x42000/64
    [ 355.924006] EntrySize/Cnt:64/128
    [ 355.927450] WTBL Segment 4 info:
    [ 355.930822] MemBaseAddr/FID:0x44000/128
    [ 355.934883] EntrySize/Cnt:32/128
    [ 366.044857] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
    [ 366.050805] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
    [ 368.763532] br-wlan: port 1(ra0) entered blocking state
    [ 368.768846] br-wlan: port 1(ra0) entered disabled state
    [ 368.774581] device ra0 entered promiscuous mode
    [ 368.779344] br-wlan: port 1(ra0) entered blocking state
    [ 368.784693] br-wlan: port 1(ra0) entered forwarding state
    [ 368.791326] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
    [ 370.906211] Interface apcli0 link up! (OPEN WEP)

    It fails to connect to internet.
    What could be the problem.?


  • administrators


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.