/dev/ttyX communication parameter reset
Is there a simple command to reset the UARTs to its default communication parameters (something as easy as "wifisetup") ?
ps does not show any process running on /dev/tty*.
Can I recover from a hung "console" (/dev/ttyS0) ?
@tjoseph1 it depends on what your issue is I guess. I use stty sane to fix broken terminals, mainly because that's the method I have used for decades. You need to install coreutils-stty, then you can run the command:
stty -F /dev/ttyS0 115200 sane
Check out the docs for stty also stty --help is very good.
That worked.. Thank you.
Never knew stty is provided as a separate pkg.
stty reminds of V.32 bis days... My first Internet was dial-up.
@tjoseph1 a lot of packages are available but not preinstalled due to the fact that on IoT devices you want to maximize available space, but seek and you shall find
My first internet was 300baud, then I was shocked to experience the massive power of a 1200/75 modem. Really made my CGA CRT pop
300 baud and then 1200 baud..? So lucky..
Read somewhere, it was the time Kevin Mitnick was doing his research .!
I was dialing into a terminal/access server situated in a data center with 256kbps backbone over G.703 copper. The days of redhat 5 (not RHEL)..