1. Home
  2. Omega Talk
  3. installing an ipk package and incompatible with the architecture error

installing an ipk package and incompatible with the architecture error

  • C

    This post is deleted!
    0
  • T

    @optech

    In the Makefile, the "build" option has parameters:
    <<<
    .PHONY: build clean test package serve run-compose-test
    VERSION := $(shell git describe --always |sed -e "s/^v//")

    build:
    @echo "Compiling source"
    @mkdir -p build
    GOOS=linux GOARCH=mipsle GOMIPS=softfloat go build $(GO_EXTRA_BUILD_ARGS) -ldflags "-s -w -X main.version=$(VERSION)" -o build/chirpstack-gateway-bridge cmd/chirpstack-gateway-bridge/main.go
    <<<

    Is that how you compile?

    Try running the "chirpstack .." exe from Omega2's command line with -h or --help option under stock 19.07.
    If that runs, then try running the exe under the custom build.

    Thanks.

    0
  • optech

    @tjoseph1 @crispyoz

    When I check makefile i see:

    .PHONY: build clean test package serve run-compose-test
VERSION := $(shell git describe --always |sed -e "s/^v//")

build:
	@echo "Compiling source"
	@mkdir -p build
	go build $(GO_EXTRA_BUILD_ARGS) -ldflags "-s -w -X main.version=$(VERSION)" -o build/chirpstack-gateway-bridge cmd/chirpstack-gateway-bridge/main.go

    so makefile has no redefining options for "GOOS=linux GOARCH=mipsle GOMIPS=softfloat".

    when i tried stock omega 19.07 binary, it was didnt work. but after you told me about softfloat option, i tried to change some options while custom compilation of openwrt by make menuconfig. I set softfloat by default from advanced compile options and i set MIPS FPU emulator enable. after making this custom binary for openwrt, even the first chirpstack-gateway-bridge exe, that you sent me before, works well in my custom openwrt compilation šŸ™‚ I guess this way is ok, right? can i will have side effects of it for future with another app? šŸ™‚ Thank you for your all support šŸ™‚

    But i couldnt find how i can make ipk file after chirpstack-gateway-bridge compilation.. Could you inform me about it how i make ipk packages?

    0 T 1 Reply
  • C

    @optech If you have set chirpstack in make menuconfig to M the ipk will be in <source>/staging_dir/packages/ramips

    I would be interested to know if transferring the package to your earlier 19 system gives you the same error as I suspect this may be an issue related to the included libs.

    0 optech 1 Reply
  • optech

    @crispyoz

    There is no chirpstack option in "make menuconfig" in openwrt, maybe i couldnt see šŸ™‚

    i think go lang uses mips float point but i guess there is no hardware fpu in MT7688, so instructions doesnt work when go compile with default GOMIPS option. Then when i make chances on make menuconfig about float point options while compiling custom openwrt, it will be ok even go uses float point option.. What do you think about this explanation?

    0
  • optech

    i compiled chirpstack-packet-multiplexer application. But i couldnt make ipk file. So i duplicated chirpstack-gateway-bridge files on working system, then i replaced with chirpstack-packet-multiplexer files šŸ™‚ and edited init.d script šŸ™‚

    Could you inform me about how can i make ipk packages after compilation of an application?

    0
  • C

    @optech ok sorry I thought you had added the package to menuconfig and were compiling that way. I haven't been following closely as @tjoseph1 has been doing a lot to help out.

    Making an ipk is not well documented, well not that I found when I was trying to learn how to manually make them. So I made a script to create the ipk for my custom package I build outside of the build system. I need to clean out some proprietary stuff out of my script then I will post it here in a short time.

    0 optech 1 Reply
  • optech

    @crispyoz thank you very much. i am looking forward your packaging script...

    0
  • C

    #!/bin/sh

    File: make_ipk.sh

    Author: Chris

    Created on 22 September 2019, 01:40:00

    while getopts "v:d:" opt;
    do
    case "${opt}" in
    v) version=${OPTARG};;
    d) directory=${OPTARG};;
    esac
    done

    if [ -z "$version" ]
    then
    echo "Version not set, use parameter -v <version>"
    exit 1;
    fi

    if [ -z "$directory" ]
    then
    echo "Output path for ipk not set, use parameter -d <path>"
    exit 1;
    fi

    mkdir $directory
    cd $directory
    mkdir -p usr/sbin
    mkdir -p etc/myapp/scripts
    mkdir -p etc/myapp/certs
    mkdir -p etc/opkg

    cp -rf /home/chris/NetBeansProjects/MyApp/dist/Release/GNU_OpenWRT-Linux/myappd usr/sbin/
    cp -rf /home/chris/source/files/www www
    cp -rf /home/chris/source/files/etc/myapp/site etc/myapp
    cp -rf /home/chris/source/files/etc/myapp/scripts etc/myapp
    cp -rf /home/chris/source/files/etc/myapp/certs etc/myapp
    cp -rf /home/chris/source/files/etc/myapp/crontab-input etc/myapp

    #cp /home/chris/update_feeds.sh etc/myapp/scripts

    copy certificates

    #cp /home/chris/source/files/etc/myapp/certs/ca.crt etc/myapp/certs
    #cp /home/chris/source/files/etc/myapp/certs/client.crt etc/myapp/certs
    #cp /home/chris/source/files/etc/myapp/certs/client.key etc/myapp/certs

    mkdir CONTROL

    echo "Package: myapp" >> CONTROL/control
    echo "Version: $version" >> CONTROL/control
    echo "Description: MyApp" >> CONTROL/control
    echo "Section: extras" >> CONTROL/control
    echo "Priority: optional" >> CONTROL/control
    echo "Maintainer: admin@myapp.com" >> CONTROL/control
    echo "License: CLOSED" >> CONTROL/control
    echo "Architecture: mipsel_24kc" >> CONTROL/control
    echo "OE: myappd" >> CONTROL/control
    echo "Homepage: www.myapp.com" >> CONTROL/control
    echo "Depends: libc, libuci, libubus, libubox, libsqlite3, libgcrypt, libgnutls" >> CONTROL/control

    echo "#!/bin/sh" >> CONTROL/preinst
    echo "#Add your scripts here" >> CONTROL/preinst
    echo "" >> CONTROL/preinst

    chmod +x CONTROL/preinst

    echo "#!/bin/sh" >> CONTROL/postinst
    echo "#Add your scripts here" >> CONTROL/postinst
    echo "cwv=$(/usr/sbin/myappd -n)" >> CONTROL/postinst
    echo "" >> CONTROL/postinst
    echo "uci set myapp.@main[0].version=$cwv" >> CONTROL/postinst
    echo "uci set myapp.@main[0].version=$(myappd -n)" >> CONTROL/postinst
    echo "ls=$(uci get myapp.@license[0].data_collection)" >> CONTROL/postinst
    echo "uci commit myapp" >> CONTROL/postinst
    echo "crontab /etc/myapp/crontab-input" >> CONTROL/postinst
    echo "rm /etc/myapp/crontab-input" >> CONTROL/postinst
    echo "/etc/init.d/cron restart" >> CONTROL/postinst
    echo "" >> CONTROL/postinst

    echo "/etc/myapp/scripts/update_banner.sh" >> CONTROL/postinst
    #echo "/etc/myapp/scripts/update_feeds.sh" >> CONTROL/postinst
    echo "/etc/init.d/myappd restart" >> CONTROL/postinst

    chmod +x CONTROL/postinst

    echo "#!/bin/sh" >> CONTROL/prerm
    echo "#Add your scripts here" >> CONTROL/prerm
    echo "" >> CONTROL/prerm
    chmod +x CONTROL/prerm

    echo "#!/bin/sh" >> CONTROL/postrm
    echo "#Add your scripts here" >> CONTROL/postrm
    echo "" >> CONTROL/postrm
    chmod +x CONTROL/postrm

    ~/source/scripts/ipkg-build ./

    Now we can create the repository files

    #*********************************************************************************************************
    export PATH="$PATH:/home/chris/source/staging_dir/host/bin"
    echo "MyApp repository: private key XXXXXXXXXXXXX" >> myapp.key
    echo "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" >> myapp.key
    #**********************************************************************************************************

    mkdir repo
    mv *.ipk repo
    cd repo
    ~/source/scripts/ipkg-make-index.sh . 2>/dev/null > Packages.manifest
    grep -vE '^(Maintainer|LicenseFiles|Source|Require)' Packages.manifest > Packages
    gzip -9nc Packages > Packages.gz
    usign -S -m Packages -s ../myapp.key

    rm Packages
    rm Packages.manifest
    rm ../myapp.key

    0 optech 1 Reply
  • C

    @optech 2 points to note.

    1. The script uses the build system scripts to create the final package, this script just makes it easy for me to copy the required files into the correct directory structure. You can see towards the end of the scripts ~/source/scripts/ipkg-build and ~/source/scripts/ipkg-make-index.sh

    2. You need to sign your packages, so if you look at the section towards the end with ********************* this I have masked out my public and private keys. You need to create these using usign package. You can install usign like so:

    git clone https://git.openwrt.org/project/usign.git
    cd usign
    cmake .
    make
    sudo make install

    Then use usign to create your keys. I'll leave you to look at that.

    0
  • optech

    @crispyoz even simplifying script looks complex šŸ™‚ thanks again i will try to use it šŸ™‚

    0
  • C

    @optech Just step line by line through the script, it's not that complex, it's just copying files to our packing folder in the structure we need the files placed on the target system. Then running a few command to create the files required for an opkg repository and signing them using usign.

    The structure of the directories is the key to the building of the package. The cool parts are in the CONTROL directory where there are 4 files that get executed depending on what opkg is doing, ie before installing your package (CONTROL/preinst), after installing your package (CONTROL/postinst), before removing your package (CONTROL/prerm) and after removing your package (CONTROL/postrm)

    The final ipk will be in the "repo" directory
    ipk_dir.png
    ipk_CONTROL.png

    0
  • T

    @optech
    These parameters are added by me šŸ™‚
    GOOS=linux GOARCH=mipsle GOMIPS=softfloat \

    Equivalent to:

    $ CC= CXX=
    etc. that we use while compiling .c, .cpp

    As you have rightly pointed out, the following was the original command line:
    go build $(GO_EXTRA_BUILD_ARGS) -ldflags "-s -w -X main.version=$(VERSION)" -o build/chirpstack-gateway-bridge cmd/chirpstack-gateway-bridge/main.go

    By stock 19.07, I meant the "19.07 binary image" that we can download from openwrt download area, not the image that we build, even if we are using the build config + the same compiler/tools as openwrt used.

    In my observation, the hello_world and the chirpstack-gateway-bridge will work with stock 19.07.7 if the softfloat option is used; not sure about other 19.07s.

    Thanks.

    0
  • optech

    @tjoseph1 and @crispyoz, Thank you for all of your support. All information which you gave me was so useful for me. šŸ™‚

    1 T 1 Reply
  • C

    @optech we're always happy to help, I hope you can complete your work successfully.

    0
  • T

    @optech
    Happy to know that the intial phase is over.

    So, what is next?

    https://github.com/OnionIoT/omega2-lmic-lorawan
    -interfacing to Omega2 through SPI-I2C bridge,library supports SX1276/8)

    https://www.seeedstudio.com/LoRa-E5-Wireless-Module-p-4745.html
    -Cortex-M4+SX126X(ST Micro), Comes with factory loaded AT command fw,
    supports ClassA/B/C, has built-in UART/ADC/I2C/GPIO.. & programmamable using ST CubeMX)

    Or any other? Curious to know which is your pick..
    (I was not aware of that this chirpy thing existed .. !!)

    Thanks

    1
  • G
    Banned

    This post is deleted!
    0
  • M
    Banned

    This post is deleted!
    0
omega2s+ 96 ipk 5 architecture 1
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.