USB not mounting [Beta Firmware 22.03.3]
-
I am trying to access files from my USB on my Onion Omega2+ using the expansion dock. I have installed the new beta firmware but when I check
/mntmy microsd card appears but not my USB. I have ckecked and I believe I have all the necesary kmods:ehci-platform,ohci-platform,usbcore, andusb-storage. I am unsure of what config I need to modify or if there are some packages or modules I am missing. Any help would be greatly appreciated
-
@santi29051 When you plug in your USB drive do you see kernel messages like the ones mentioned here: https://github.com/OnionIoT/OpenWRT-Packages/blob/openwrt-22.03/technical-doc.md#usb ?
-
@Lazar-Demin I do not. Which is weird because I do see those logs on my Onion that has OpenWRT 18. I got around this by simply using ftp but I would like to be able to use the usb on my expansion dock so where should I start debugging?
-
@cosmonaut2919 I tried plugging in a USB drive into an Omega2 running the latest
22.03.3-20230628firmware and saw some strange behaviour:- When I plugged in the USB drive, the serial console didn't output anything and I realized it was stuck
- I killed the serial session and started a new one, running
dmesgI saw the kernel messages did in fact happen - I tried unplugging the drive and it totally froze up that serial tty on my computer
Can you try doing the same thing and seeing if you get the same results?
-
@Lazar-Demin I was able to get around the need of a USB by using ftp through wireguard that I have set up. I can still send you the logs if you want if it will help with development and production of 22.03
-
@cosmonaut2919 ya, please post the logs when you get a chance
-
@cosmonaut2919 Also post the output of lsmod
-
@Lazar-Demin Sorry about the late reply I have been away for a bit and missed your response. Here is my dmesg output. Removing the USB did not freeze my onion and I can still access it
[ 510.066127] rt3050-esw 10110000.esw: port 0 link down [ 1861.049340] usb 1-1.1: new high-speed USB device number 4 using ehci-platform [ 1861.204647] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 1861.228862] scsi host0: usb-storage 1-1.1:1.0 [ 1862.260485] scsi 0:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2 [ 1862.307718] sd 0:0:0:0: [sda] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB) [ 1862.341522] sd 0:0:0:0: [sda] Write Protect is off [ 1862.346414] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08 [ 1862.356579] sd 0:0:0:0: [sda] No Caching mode page found [ 1862.362078] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 1862.414973] sda: [ 1862.424476] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2022.294838] usb 1-1.1: USB disconnect, device number 4
-
@crispyoz This is my lsmod output.
autofs4 19936 1 cdc_acm 15696 0 cdc_wdm 8480 2 qmi_wwan cfg80211 285840 3 mt7603e,mt76,mac80211 chacha_mips 5344 1 libchacha20poly1305 cmac 2464 0 compat 1024 2 mac80211,cfg80211 cp210x 14272 0 crc_ccitt 1664 1 ppp_async crc16 1024 1 ext4 crc32c_generic 1376 3 drbg 17536 0 ehci_fsl 3456 0 ehci_hcd 38064 2 ehci_platform,ehci_fsl ehci_platform 4608 0 ext4 440000 1 fat 58192 1 vfat fsl_mph_dr_of 3632 0 gpio_button_hotplug 6592 0 hmac 2496 0 i2c_core 26480 2 i2c_mt7621,i2c_dev i2c_dev 5200 0 i2c_mt7621 2912 0 ip6_udp_tunnel 1696 1 wireguard jbd2 56336 1 ext4 jitterentropy_rng 7136 0 kpp 896 0 leds_gpio 3168 0 libchacha20poly1305 4320 1 wireguard,[permanent] libcrc32c 592 1 nf_tables libcurve25519_generic 10464 1 wireguard libsha256 8576 1 sha256_generic mac80211 521824 2 mt7603e,mt76 mbcache 3216 1 ext4 mii 5152 1 usbnet mmc_block 27152 2 mmc_core 88480 3 mmc_block,sdhci,mtk_sd mt76 44448 1 mt7603e mt7603e 38432 0 mtk_sd 15408 0 nf_conntrack 69200 7 nft_redir,nft_nat,nft_masq,nft_flow_offload,nft_ct,nf_nat,nf_flow_table nf_defrag_ipv4 1216 1 nf_conntrack nf_defrag_ipv6 5584 1 nf_conntrack nf_flow_table 22128 4 nf_flow_table_ipv6,nf_flow_table_ipv4,nf_flow_table_inet,nft_flow_offload nf_flow_table_inet 576 0 nf_flow_table_ipv4 448 0 nf_flow_table_ipv6 448 0 nf_log_common 2976 2 nf_log_ipv6,nf_log_ipv4 nf_log_ipv4 3680 0 nf_log_ipv6 3968 0 nf_nat 22384 4 nft_redir,nft_nat,nft_masq,nft_chain_nat nf_reject_ipv4 2528 2 nft_reject_ipv4,nft_reject_inet nf_reject_ipv6 2944 2 nft_reject_ipv6,nft_reject_inet nf_tables 150992190 nft_fib_inet,nf_flow_table_ipv6,nf_flow_table_ipv4,nf_flow_table_inet,nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet,nft_reject,nft_redir,nft_quota,nft_objref,nft_numgen,nft_nat,nft_masq,nft_log,nft_limit,nft_hash,nft_flow_offload,nft_fib_ipv6,nft_fib_ipv4,nft_fib,nft_ct,nft_counter,nft_chain_nat nfnetlink 5184 1 nf_tables nft_chain_nat 864 2 nft_counter 1792 15 nft_ct 7680 3 nft_fib 1408 3 nft_fib_inet,nft_fib_ipv6,nft_fib_ipv4 nft_fib_inet 672 0 nft_fib_ipv4 2080 1 nft_fib_inet nft_fib_ipv6 2784 1 nft_fib_inet nft_flow_offload 3488 0 nft_hash 2432 0 nft_limit 3584 5 nft_log 1728 0 nft_masq 1824 1 nft_nat 2592 0 nft_numgen 1504 0 nft_objref 1664 0 nft_quota 2016 0 nft_redir 1792 0 nft_reject 1152 3 nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet nft_reject_inet 1152 2 nft_reject_ipv4 672 0 nft_reject_ipv6 672 0 nls_base 4928 6 vfat,fat,nls_utf8,nls_iso8859_1,nls_cp437,usbcore nls_cp437 4416 0 nls_iso8859_1 2880 0 nls_utf8 864 0 ohci_hcd 25744 1 ohci_platform ohci_platform 3424 0 option 33760 0 poly1305_mips 3424 1 libchacha20poly1305 ppp_async 7136 0 ppp_generic 24880 3 pppoe,ppp_async,pppox pppoe 9600 0 pppox 1296 1 pppoe qmi_wwan 16704 0 scsi_mod 88272 2 usb_storage,sd_mod sd_mod 30160 0 sdhci 34448 1 sdhci_pltfm sdhci_pltfm 2368 0 seqiv 1600 0 sha256_generic 2400 0 slhc 5312 1 ppp_generic spidev 6960 0 udp_tunnel 10640 1 wireguard usb_common 3184 3 ohci_hcd,ehci_platform,usbcore usb_storage 43280 0 usb_wwan 4480 1 option usbcore 145760 15 option,usb_wwan,qmi_wwan,cp210x,usbserial,usbnet,cdc_wdm,cdc_acm,usb_storage,ohci_platform,ohci_hcd,ehci_platform,ehci_fsl,ehci_hcd usbnet 17296 1 qmi_wwan usbserial 17872 3 option,usb_wwan,cp210x vfat 9696 0 wireguard 52336 0
-
@cosmonaut2919 What does lsusb command report?
-
Bus 001 Device 003: ID 2c7c:0125 Quectel EC25-AF Bus 002 Device 001: ID 1d6b:0001 Linux 5.10.161 ohci_hcd Generic Platform OHCI controller Bus 001 Device 005: ID abcd:1234 General UDisk Bus 001 Device 002: ID 05e3:0608 USB2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.161 ehci_hcd EHCI Host Controller
-
I was able to fix it. I didn't even think about my /etc/config/fstab. I had anon_mount off. With it on I can now use my USB
