Empty onion?
-
I bought 2 Onion boards. One is working pretty good, but the other looks like empty.
It starts blinking the yellow led then the led stays solid as expected, but nothing happens, no wifi signal.
PuTTY connects but a lot of garbage start to appears on the screen.
Anyone can help me?
-
@paulo-eduardo-ubaldino-de-souza said:
PuTTY connects but a lot of garbage start to appears on the screen.
Hello,
What do you mean garbage ;)? Could you paste here?
-
-
Have you tried a factory reset? Offhand, this looks to me like a possible baud rate issue, but it could be a number of other things that can mess up communications. If you're not interested in doing a factory reset, you might want to tinker with your serial communications settings (baud rate, data length, number of stop bits, parity, and flow control). My PuTTY settings for the Omega are: baud rate = 9600, data length = 8 bits, 1 stop bit, parity = none, flow control = Xon/Xoff).
-
Yeah!
I tried to reset it a lot before.
At this moment, i tried to reset it 3 times, then changed de baud rate from 9600 until 115200 and after I rebooted it.
And, now, for the very first time it is working and the WIFI too!
Thank you, guys!
I hope it stays working well.
-
@paulo-eduardo-ubaldino-de-souza Good to hear you are going OK now
I've been trying to figure out what could have been causing your problem.Yes, baud rate of 115200 is what you should be using as is covered in the Omega Wiki at https://wiki.onion.io/Get-Started and https://wiki.onion.io/Tutorials/Connecting-to-Omega-via-Serial-Terminal
-
I'm not sure what's happening with this onion.
Now, I have to connect and reboot to make it starts.
The other one I have works fine.