Just voted !
Best posts made by esunayg
RE: Onioneers! We need your help!
Latest posts made by esunayg
Usb Wireless Ralink Driver Install
how can I use my ralink usb wlan card on my omega?
Bus 001 Device 002: ID 148f:7601
Bus 001 Device 001: ID 1d6b:0002
But I dont see it on ifconfig.
RE: Reboot and / or Shutdown script to run if anything causes reboot unintentially
Thank you @kit-bishop,
I will read them.
Reboot and / or Shutdown script to run if anything causes reboot unintentially
I was just wondering for a solution regarding unintentially reboot.
My problem is, I would like to know if anything other than my script: OS or other scripts initiate a reboot sequence I want my script to notice that and interrupt reboot, and do some stuff and continue reboot/shutdown.
Could this possible?
And one another question, can I leave some ports as it is (output high or low, not pwm) during reboot?
RE: Omega getting too hot to the touch
Your current breadboard design may also cause it. If you pull up a low output, or something kie it.
Or the other problem could be over voltage. Have you checked?
Mine only draws 100ma 4,95v from expansion board.
RE: How to use BLE Extension?
I also wait for it.
RE: Empty onion?
PuTTY connects but a lot of garbage start to appears on the screen.
What do you mean garbage ;)? Could you paste here?
RE: GPIO: safe ports to use as output port
Thank you @kit-bishop ,
I am planning to put a mechanical relay on 8 port relays common input ports as NO output of relay (it is a regular chinese 8 port solid state relay). But I dont think it will help. I have created a well isolated design (as well as my knowledge :). It is grounded also. I really wonder why it does same routine. I have made a video also, I can send it to you.
My real need is, can be all gpio as input port during boot and after boot? I mean if omega need some gpio which must be used during boot (like for expansion packs etc.) as output, could someone please make a list so we should avoid using them as output (like pic datasheets).
Those ports were actually not floating on my omega. And they had a fixed output ports as high. I will also try with smaller pull down again.
RE: 16x2 Lcd with Onion
Sorry for late answer, @Kit-Bishop
I will take their photos and upload it here. I have lots of them and I guess there are 4 different types
RE: Increasing wireless coverage
Thank you for your reply @boken-lin , I will test with usb wifi adapter to be safe. I hope I wont need, but better safe than sorry.
RE: GPIO output voltage vs. output current graph
Thank you @jeff-verive it was very helpfull for me!