Posts made by Ger Buurman 0

correct already solved thanks.....

thanks, that did also the trick at my omea, I suggest to also mention the fact that after the upgrade you lose your ssh connection, if used, and have to wait a minute. cheers Ger

Dear all. When I tried to upgrade my very own Omega2Pro the following error occurs:
{ "upgrade": true, "build_mismatch": false, "image": { "binary": "omega2pro-v0.3.1-b211.bin", "url": "http://repo.onioniot.com/omega2/images/omega2pro-v0.3.1-b211.bin", "local": "/tmp/omega2pro-v0.3.1-b211.bin", "size": "9699511" }, "device": { "version": "0.3.0", "major": 0, "minor": 3, "revision": 0, "build": 204 }, "repo": { "version": "0.3.1", "major": 0, "minor": 3, "revision": 1, "build": 211 } }
/usr/bin/oupgrade: local: line 378: not in a function
I m not able to update the formware. Any ideas? by the way, when will the update documentation for the pro avalable?

Regards

@Ger-Buurman-0 Thanks for all of the info
ERGO: You can't boot the Omega2+ via and USB

Thanks

I am searching for a work around to boot my Omega via an USB. The documentation provide me with less then needed info. Somebody a suggestion or idea?
Using: Omega2, exp dock, macbook
(I can use ssh or web)

@William-Scott
Thanks Bill (sorry for the V)
I am using exp dock tagged to a macbook.

@William-Scott
Thanks Vill for the update, yes it is a typo and no I can't get access to the Omega. Is it a doa or are there any work arounds?

Regards

Ger

@György-Farkas
Is there any known reason why the led turns off after a while? power lack? jittering issue, doa ? Is there a way to get a new one .

Regards

Ger

I need some help concerning the following issues:

1. I can't see my Omega in wifi can't reach it while using ssh (I know that the omega uses 192.178.3.1 and my home router uses 192.168.178.1 so maybe there is a collision thingy but I can see the omega )
2. after a while the oracle led shuts
3. is the a way to create a bootable usb (via a macbook) the start the omega so I can check the settings, firmware and so forth.

Thanks in advance
Ger
Netherlands

Hi Cas, I am using Omega 2+, flashing is a good option but the Omega is truly bricked so I have to do it slightly different
Fiets, I think, I need to create a USB with the necessary sw and then use the usb on the omega to reboot and flashing. Yes/No? The omega can t be used at the moment. Help

After booting the Onion Omega the access point doesnt appear in my wifi list. Trying to connect via 192.168.3.1 or with ssh doesnt work either. how can I reach the Onion Omega2

Re: Wifi Connection problems reroute

Still having problems while using wifi with the Omega2. I use a macbook (2010) and want to connect the omgea via wifi to the internet so I can resume the wifisetup/wifimanager. When I am working with my ' ordinary' wifi connection to our router (FRITZ!Box 7581 UI) no problem. As soon as I connect to the Omega using wifi the router in't recognized and no connection to the internet is allowed. I want to update my omega2 and start my IOT projects. Please, any ideas/suggestion for this issue?
Regards
A dutchy with IOT ideas.

@Herr-Frei The same issue here, as soon as the setup scans for wifi sids my home sid didnt appear. We use FRITZ!Box wifi next to onion.
Any ideas to resume the setup?

@David-Lawrence said in Wifi Connection problems:

Re: New OS Release!

Hi I had not used my Omega2+ for few months. I noticed I was a few firmware versions behind so I updated to the latest firmware, omega2p-v0.2.1-b199. After the update I lost connectivity to my network and the internet. I used wifisetup and tried to connect to my network it looked like it worked. I found that it did not work and I noticed that I cannot always connect to the Onion 'ap' or I would connect and it would drop shortly after. Anyway I have restored my previous firmware 'omega2p-v0.1.10-b160' went through and setup the AP and network again and it worked. I have followed several suggestions from the forums all to no avail. Anyway it looks like the radio keeps turning off when I use any of the newer firmware versions. Does anyone have an answer to this problem yet?

The same issue here, as soon as the setup scans for wifi sids my home sid didnt appear. We use FRITZ!Box wifi next to onion.
Any ideas to resume the setup?