Hi. Im kind of new with the Omega. I ran the firmware update from the webapp for my 2+. It bricked. I've noticed that my problem is with the kernel.Ive tried with this
http://community.onion.io/topic/1154/omega-2-usb-firmware-install-after-brick-resolved
but i cant even get the menu with the reset up.
All that i can see wiring a usb/ttl adapter is:
verifying checksum ok
a lot of text like:
[ 19.278040] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0004: 0x5000 instead
[ 19.287662] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0008: 0x1000 instead
[ 19.297284] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df000c: 0x1000 instead
[ 19.306906] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0014: 0x7d24 instead
[ 19.316527] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0018: 0xe069 instead
[ 19.326148] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df001c: 0x3fe2 instead
[ 19.335771] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0020: 0xfe74 instead
[ 19.345392] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0024: 0xd5b2 instead
[ 19.355014] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0028: 0xcc36 instead
[ 19.364630] jffs2: Further such events for this erase block will not be printed
[ 19.400773] jffs2: CLEANMARKER node found at 0x01dffbfc, not first node in block (0x01df0000)
[ 19.409494] jffs2: Node at 0x01dfffe8 with length 0x00000044 would run over the end of the erase block
[ 19.418939] jffs2: Perhaps the file system was created with the wrong erase size?
[ 19.426700] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00004: 0x00a0 instead
[ 19.436332] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00008: 0xc4bb instead
[ 19.445955] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e0000c: 0xc4bb instead
[ 19.455577] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00010: 0xaccd instead
[ 19.465199] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00028: 0x8a4b instead
[ 19.500237] jffs2: CLEANMARKER node found at 0x01e0fbfc, not first node in block (0x01e00000)
[ 19.511496] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found
Ending with
[ 19.527264] VFS: Mounted root (jffs2 filesystem) readonly on device 31:5.
[ 19.535241] Freeing unused kernel memory: 192K (803d0000 - 80400000)
[ 19.541797] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 19.566820] Rebooting in 1 seconds..
and then nothing.
Posts made by Sycol
-
Kernel Panic! No Working init found.
-
RE: Omega 2+ USB Firmware Install after Brick. [Resolved]
Hi. Im kind of new with the Omega. I ran the firmware update, it bricked and I tried to do what you said without success. I've noticed that my problem is with the kernel.
All tha i can see is:
verifying checksum ok
a lot of text like:
[ 19.278040] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0004: 0x5000 instead
[ 19.287662] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0008: 0x1000 instead
[ 19.297284] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df000c: 0x1000 instead
[ 19.306906] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0014: 0x7d24 instead
[ 19.316527] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0018: 0xe069 instead
[ 19.326148] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df001c: 0x3fe2 instead
[ 19.335771] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0020: 0xfe74 instead
[ 19.345392] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0024: 0xd5b2 instead
[ 19.355014] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01df0028: 0xcc36 instead
[ 19.364630] jffs2: Further such events for this erase block will not be printed
[ 19.400773] jffs2: CLEANMARKER node found at 0x01dffbfc, not first node in block (0x01df0000)
[ 19.409494] jffs2: Node at 0x01dfffe8 with length 0x00000044 would run over the end of the erase block
[ 19.418939] jffs2: Perhaps the file system was created with the wrong erase size?
[ 19.426700] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00004: 0x00a0 instead
[ 19.436332] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00008: 0xc4bb instead
[ 19.445955] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e0000c: 0xc4bb instead
[ 19.455577] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00010: 0xaccd instead
[ 19.465199] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01e00028: 0x8a4b instead
[ 19.500237] jffs2: CLEANMARKER node found at 0x01e0fbfc, not first node in block (0x01e00000)
[ 19.511496] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Ending with
[ 19.527264] VFS: Mounted root (jffs2 filesystem) readonly on device 31:5.
[ 19.535241] Freeing unused kernel memory: 192K (803d0000 - 80400000)
[ 19.541797] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 19.566820] Rebooting in 1 seconds..
and then nothing.
Should I open a new thread or this is ok? -
RE: USB connection without a dock
@ayhan-uçar I think you're in the wrong topic.
-
RE: USB connection without a dock
Ok, i'm still confused.
Can I power a usb with external 5v and connect directly its D+ and D- to the Omega's D+, D- pins or it will fry it?