Help to Brick - Omega Onion 2+
-
Hello friends.
I booted to the last update. I then reset the factory. and I can't reach the device right now.
Orange light steady.
Wifi available but can't connect.
I have Power Duck 2.How do I flash.
-
@Bülent-Çelik said in Help to Brick - Omega Onion 2+:
Hello friends.
I booted to the last update. I then reset the factory. and I can't reach the device right now.
Orange light steady.
Wifi available but can't connect.
I have Power Duck 2.How do I flash.
I tried the reset button but it didn't.
-
@Bülent-Çelik hi, try rebooting with a serial connection and terminal and see if you can reach it that way. if not i'd suggest doing the usb recovery procedure.
-
@Douglas-Kryder There is no serial port for power duck 2.How to connect directly. Can it be done with Gpio?
-
@Bülent-Çelik need to have a serial cable that terminates with the single leads and find [i don't remember the header number for pins] but use TX,RX, and GND. on my cable it is green TX, white RX, black GND. but they tend to vary a bit between some cables. there is a chart online that maps all the header slots . make sure it is a 3v cable cause using a 5v will probably kill it.
-
@Douglas-Kryder Can I do it with TTL CH340 to usb.
-
@Bülent-Çelik yes
