1. Home
  2. Omega Talk
  3. Omega2+ Wifi API

Omega2+ Wifi API

  • C

    @Pavel-Negrobov Omega OOTB uses uhttpd, the /ubus context is provided by the ubus uhttpd plugin.

    Make sure you have the latest firmware installed and installed uhttpd-mod-ubus

    0
  • P

    thanks, wifi scan work normally.
    But how I can connect/disconnect to AP? I didn't found nothing about this in ubus documentation

    0
  • C

    @Pavel-Negrobov I'm not clear on what you mean by connect/disconnect to AP. Are you referring to bring up the interface and bring it down? Or are you referring to connecting to a new AP and adding it to your network wireless setup?

    I'll assume you want to connect to a new WiFi AP you selected from the results of the iwinfo scan. UBUS gives you access to the UCI configuration functionality and we can use UCI to update the wireless configuration to add a new AP configuration. You can see the configuration file in /etc/config/wireless.

    To use UBUS you would send a JSON request as follows, to add a new wifi configuration section to the wireless config file, note that the first parameter is your ubus_rpc_session you received when you executed the login request from my previous comments. Notice we are calling UCI instead of iwinfo now:

    {
    "jsonrpc": "2.0",
    "id": 1,
    "method": "call",
    "params": ["c47f70c98fe4a145288d214ce12214fb", "uci", "add", {
    "config": "wireless",
    "type": "wifi-config"
    }]
    }

    Next we need to add the AP details to the section:

    {
    "jsonrpc": "2.0",
    "id": 1,
    "method": "call",
    "params": ["c47f70c98fe4a145288d214ce12214fb", "uci", "set", {
    "config": "wireless",
    "type": "wifi-config",
    "values": {
    "key": "eac0cc123d3f81e39a4e48d9da",
    "ssid": "MY-NETWORK-SSID",
    "encryption": "psk2"
    }
    }]
    }

    Then you send a commit to tell UCI to save these changes:

    {
    "jsonrpc": "2.0",
    "id": 1,
    "method": "call",
    "params": ["c47f70c98fe4a145288d214ce12214fb", "uci", "commit", {
    "config": "wireless"
    }]
    }

    Now look at your /etc/config/wireless and you will see the new entries.

    You will need to either restart the network to make this have effect, or you can reboot. Here is the reboot JSON:

    {
    "jsonrpc": "2.0",
    "id": 1,
    "method": "call",
    "params": ["c47f70c98fe4a145288d214ce12214fb", "system", "reboot", {}]
    }

    You will see this time we are not using iwinfo nor uci, we are using "system". This is the great thing about utilising the ubus system, you can interact with many areas of OpenWrt in a consistent manner. You just need to get your head around the ubus JSON requirements.

    You can also secure ubus by adding new users that can be given limited access to ubus functionality.

    0
  • P

    @crispyoz

    Yes, add AP (in OpenWRT terminology, I called this "connect to AP") works good.
    I also tried to delete AP with queries:

    {"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["b2b0a3c1d176231a474e7a30bea02a99", "uci", "delete", {"config": "wireless", "type": "wifi-config", "values": {"ssid": "ZyXEL_GIGA_III" } }] }

    Commit UCI

    {"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["b2b0a3c1d176231a474e7a30bea02a99", "uci", "commit", {"config": "wireless"}]}

    Restart network

    {"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["b2b0a3c1d176231a474e7a30bea02a99", "network", "restart", {}]}

    But Omega stay connected after network restart. Where is my mistake?
    Section in /etc/config/wireless is disappeared

    0 G 1 Reply
  • C

    @Pavel-Negrobov please post the JSON response for the restart command. If it is returning 0 ie success, instead send network stop, pause 10 seconds, then send network start. I have seen similar issue on non-omega device where connection is maintained despite network restart when connecting to Netgear router.

    0 P 1 Reply
  • G

    @Pavel-Negrobov If your Omega2 is running one of recent official firmwares (ie. Onion Warp Core is its WiFi driver) and connected to a WiFi network then

    • disconnect from that WiFi network:
      uci set wireless.sta.disabled='1'; uci commit wireless; wifi
    • (re)connect to that WiFi network:
      uci set wireless.sta.disabled='0'; uci commit wireless; wifi
    0
  • P

    @crispyoz said in Omega2+ Wifi API:

    @Pavel-Negrobov please post the JSON response for the restart command. If it is returning 0 ie success, instead send network stop, pause 10 seconds, then send network start. I have seen similar issue on non-omega device where connection is maintained despite network restart when connecting to Netgear router.

    Restart:

    /# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["932408e95d88194879428f3b5c75ba68", "network", "restart", {}]}' http://loca
lhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}

    but network stop and network start both returns {"jsonrpc":"2.0","id":1,"result":[3]} and happens nothing.

    But thank you for the previous help. Login, scan and AP add (connect) works correctly.

    @György-Farkas said in Omega2+ Wifi API:

    @Pavel-Negrobov If your Omega2 is running one of recent official firmwares (ie. Onion Warp Core is its WiFi driver) and connected to a WiFi network then

    • disconnect from that WiFi network:
      uci set wireless.sta.disabled='1'; uci commit wireless; wifi
    • (re)connect to that WiFi network:
      uci set wireless.sta.disabled='0'; uci commit wireless; wifi

    Thanks. These commands are help, omega disconnects from AP after that.

    0
  • C

    @Pavel-Negrobov if you post the JSON response I can see what the issue is. Error 3 doesn't seem correct.

    The UCI method of disabling the interface seems like a hack to me.

    0 G P 2 Replies
  • G

    @crispyoz said in Omega2+ Wifi API:

    The UCI method of disabling the interface seems like a hack to me.

    Hack???
    For example @Lazar-Demin also said in Really Bad Lag on 6 Nov 2019:

    @Nate are the Omegas connected to a WiFi network?
    If not and the WiFi client interface is active, it will scan for valid networks on a <10 second interval. This scanning kills the network throughput momentarily, forcing it to always be in catch-up mode.

    Sounds like this might be your issue from what you've described.

    To avoid this, just disable the wifi client interface:

    uci set wireless.sta.disabled='1'
uci commit wireless
wifi
    0
  • C

    @György-Farkas I respect your right to have an opinion, my opinion is different to yours and @Lazar-Demin on this point

    IMHO is should not be necessary to disable an interface in order to disconnect from a WiFi AP. All that should be required is to "forget" the WiFi credentials, disconnect (stop the network) then when the network restarts the WiFi should not reconnect.

    Calling network stop bring down all interfaces, by definition they should no longer be reconnected to anything. When you bring an interface back up it should read the configuration, that configuration will no longer contain the wifi credentials so the interface should be unable to connect.

    Disabling the interface may work, but in my opinion it is a hack since AP association is an OSI L2 function.

    0 G 1 Reply
  • P

    @crispyoz said in Omega2+ Wifi API:

    @Pavel-Negrobov if you post the JSON response I can see what the issue is. Error 3 doesn't seem correct.

    Here full output without any reduction (Wifi Connection is active at start):

    root@Omega-3079:/# curl -d '{ "jsonrpc":"2.0", "id":1, "method": "call", "params
": [ "00000000000000000000000000000000", "session", "login", { "username":"root"
, "password":"redhat" } ] }' http://localhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0,{"ubus_rpc_session":"213ac1e069ca85b390c70570a6a58197","timeout":300,"expires":299,"acls":{"access-group":{"onion-os":["read","write"],"superuser":["read","write"],"unauthenticated":["read"]},"cgi-io":{"*":["write"],"upload":["write"]},"file":{"*":["*"]},"ubus":{"*":["*"],"file":["list","read","exec","write","stat"],"i2c_exp":["pwm-exp","relay-exp","oled-exp"],"iwinfo":["assoclist"],"network.device":["status"],"network.interface":["dump"],"network.interface.wwan":["status"],"onion":["wifi-scan","oupgrade","wifi-setup","omega-led","gpio"],"onion-console":["app-list"],"onion-helper":["*"],"onion-os":["app-list"],"rpc-sys":["reboot","password_set"],"service":["list"],"session":["access","login"],"system":["info","hostname","board"],"uci":["*"]},"uci":{"*":["read","write"],"commit":["write"],"delete":["read","write"],"get":["read","write"],"mjpg-streamer":["read","write"],"network":["read","write"],"onion":["read","write"],"rpcd":["read","write"],"set":["write"],"system":["read","write"],"wireless":["read","write"]}},"data":{"username":"root"}}]}root@Omega-3079:/#
root@Omega-3079:/#
root@Omega-3079:/#
root@Omega-3079:/# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["213ac1e069ca85b390c70570a6a58197", "uci", "delete", {"config": "wireless",
 "type": "wifi-config", "values": {"ssid": "ZyXEL_GIGA_III" } }] }' http://local
host/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}root@Omega-3079:/#
root@Omega-3079:/#
root@Omega-3079:/# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["213ac1e069ca85b390c70570a6a58197", "uci", "commit", {"config": "wireless"}
]}' http://localhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}root@Omega-3079:/#
root@Omega-3079:/# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["213ac1e069ca85b390c70570a6a58197", "network", "restart", {}]}' http://loca
lhost/ubus
[  916.850259] br-wlan: port 1(ra0) entered disabled state
[  916.869218] device ra0 left promiscuous mode
[  916.873758] br-wlan: port 1(ra0) entered disabled state
[  916.922481] br-wlan: port 1(ra0) entered blocking state
[  916.927796] br-wlan: port 1(ra0) entered disabled state
[  916.933541] device ra0 entered promiscuous mode
[  916.977410] br-wlan: port 1(ra0) entered blocking state
[  916.982786] br-wlan: port 1(ra0) entered forwarding state
{"jsonrpc":"2.0","id":1,"result":[0]}root@Omega-3079:/#
root@Omega-3079:/# [  928.118990] br-wlan: port 1(ra0) entered disabled state
[  928.132213] device ra0 left promiscuous mode
[  928.136762] br-wlan: port 1(ra0) entered disabled state
[  928.220242] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
[  935.131816] br-wlan: port 1(ra0) entered blocking state
[  935.137170] br-wlan: port 1(ra0) entered disabled state
[  935.142880] device ra0 entered promiscuous mode
[  935.147650] br-wlan: port 1(ra0) entered blocking state
[  935.153001] br-wlan: port 1(ra0) entered forwarding state
[  935.159845] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready

root@Omega-3079:/# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["213ac1e069ca85b390c70570a6a58197", "network", "stop", {}]}' http://localho
st/ubus
{"jsonrpc":"2.0","id":1,"result":[3]}root@Omega-3079:/#
root@Omega-3079:/# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "param
s": ["213ac1e069ca85b390c70570a6a58197", "network", "start", {}]}' http://localh
ost/ubus
{"jsonrpc":"2.0","id":1,"result":[3]}root@Omega-3079:/#
root@Omega-3079:/#

    My router is ZyXEL Keenetic GIGA 3

    0 C 1 Reply
  • G

    @crispyoz
    After these commands
    uci set wireless.sta.disabled='1'; uci commit wireless; wifi
    only the option disabled '0' line will change to option disabled '1' in the config wifi-iface 'sta' section of the /etc/config/wireless file.
    So after these commands
    uci set wireless.sta.disabled='0'; uci commit wireless; wifi
    Omega2 will be able to reconnect to that WiFi network.

    Please check it (before and after) with
    cat /etc/config /wireless
    or
    uci show wireless
    wireless.sta.disabled='1' vs. wireless.sta.disabled='0'

    0 C 1 Reply
  • C

    @Pavel-Negrobov Use network reload instead of restart, the methods stop and start don't exist, hence the error 3 response.

    You can look at what ubus methods are available using the command ubus -v list network

    0 P 1 Reply
  • C

    @György-Farkas Obviously I understand what it does, I just don't agree with the approach.

    0 Lazar Demin 1 Reply
  • Lazar Demin
    administrators

    @crispyoz We're open to suggestions on this, what kind of approach would you prefer?

    0
  • C

    @Lazar-Demin This thread has got a little off track and in fact there is no change required. My point was that disabling the interface in order to reconfigure the network may work but the correct approach is to utilise the network restart or reload approach since this is how linux networking was designed to function. Disabling the interface may work today but in the future there may be side effects of this approach.

    0
  • P

    @crispyoz said in Omega2+ Wifi API:

    @Pavel-Negrobov Use network reload instead of restart, the methods stop and start don't exist, hence the error 3 response.

    Restart has no effect:

    # curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["3f116f85f4e1ad269f7b22ac539443b3", "uci", "delete", "config": "wireless",  "type": "wifi-config", "values": {"ssid": "ZyXEL_GIGA_III" } }] }' http://localhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}
# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["3f116f85f4e1ad269f7b22ac539443b3", "uci", "commit", {"config": "wireless"}]}' http://localhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}
# curl -d '{"jsonrpc": "2.0", "id": 1, "method": "call", "params": ["3f116f85f4e1ad269f7b22ac539443b3", "network", "reload", {}]}' http://localhost/ubus
{"jsonrpc":"2.0","id":1,"result":[0]}

    Thats all. Wifi restart process does not started.
    My firmware version is 0.3.2 b240. Today I will try to set the last 242 build.

    0
  • C

    @Pavel-Negrobov If you examine your /etc/config/wireless you will see the ssid and key are still present on the sta interface section so the device will still be associated with the ap.

    0
  • P

    No, /etc/config/wireless is clean:

    # cat /etc/config/wireless

config wifi-device 'radio0'
        option type 'ralink'
        option variant 'mt7628'
        option country 'US'
        option hwmode '11g'
        option htmode 'HT40'
        option channel 'auto'
        option disabled '0'
        option device_mode 'apsta'
        option op_mode 'preference'

config wifi-iface 'ap'
        option device 'radio0'
        option mode 'ap'
        option network 'wlan'
        option ifname 'ra0'
        option encryption 'psk2'
        option key '12345678'
        option disabled '0'
        option ssid 'Omega-3079'

config wifi-iface 'sta'
        option device 'radio0'
        option mode 'sta'
        option ifname 'apcli0'
        option encryption 'psk2'
        option ssid 'YourSsidHere'
        option key 'YourPasswordHere'
        option network 'wwan'
        option disabled '1'
        option led 'omega2p:blue:wifi'

    okay, I can call

    uci set wireless.sta.disabled='1'; uci commit wireless; wifi
uci set wireless.sta.disabled='0'; uci commit wireless; wifi

    as György Farkas said.

    PS.
    On latest 242 build all the same.

    0 G 1 Reply
  • C

    @Pavel-Negrobov sta shows as disabled so I'm not sure how it would be associated with anything. If @György-Farkas solution works for you you should go with that.

    0
wifi api 1
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.