Controlling Omega Onion 2Pro Radio Module

[Antony]

Hello,

I am using an Omega onion 2pro- Omega2S+ and want to do the following scenarios:

1. set the channel of the radio module to low, mid and high. Is the radio module ra0?

2. set the transmit output power to max

3. set the transmit duty cycle is 100%.

Are there any terminal commands I can use to modify these parameters and return to default settings in between each time?

Thank you!

[crispyoz]

@Antony If you're using the standard Warp Core driver some of this stuff is not functional and there is no documentation. If you are using the OpenWrt driver you can refer to the relevant documentation here.

Keep in mind that altering some of this stuff may breach the law in your jurisdiction.