USB port stopped working
-
Have been using the Onion the last few days as a BLE beacon, but suddenly it stopped broadcasting. I assumed it was the BLE dongle, but it seems the USB controller just died while just sitting there. Dongle works on other devices, and I've borrowed another dock and same result.
Suggestion on how to determine if its a hardware or software failure? I doubt its a software issue as I've tried a factory reset and there wasn't really any changes made to the software when it stopped working.
/b
edit: adding information as per guidelines.
Fimware
Ω-ware: 0.1.4 b330Software packages
root@Omega-2194:~# opkg list Onion-Console - 0.1-1 alsa-lib - 1.0.28-1 avahi-daemon-service-http - 0.6.31-12 avahi-daemon-service-ssh - 0.6.31-12 avahi-dbus-daemon - 0.6.31-12 base-files - 157.2-r49398 block-mount - 2016-01-10-96415afecef35766332067f4205ef3b2c7561d21 busybox - 1.23.2-1 ca-certificates - 20150426 dbus - 1.9.14-1 device-client - 0.6-1 dnsmasq - 2.73-1 dropbear - 2015.67-1 fast-gpio - 0.1-1 firewall - 2015-07-27 fstools - 2016-01-10-96415afecef35766332067f4205ef3b2c7561d21 glib2 - 2.43.4-1 gpioctl-sysfs - 0.0.6-1 hostapd-common - 2015-03-25-1 i2c-exp-ubus - 0.4-1 i2c-tools - 3.0.3-1 ip6tables - 1.4.21-1 iptables - 1.4.21-1 iw - 4.3-1 iwinfo - 2015-06-01-ade8b1b299cbd5748db1acf80dd3e9f567938371 jshn - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb jsonfilter - 2014-06-19-cdc760c58077f44fc40adbbe41e1556a67c1b9a9 kernel - 3.18.36-1-ef1ed2b992e0d231323211df2a4688f1 kmod-ath - 3.18.36+2016-01-10-1 kmod-ath9k - 3.18.36+2016-01-10-1 kmod-ath9k-common - 3.18.36+2016-01-10-1 kmod-bluetooth - 3.18.36-1 kmod-cfg80211 - 3.18.36+2016-01-10-1 kmod-crypto-aead - 3.18.36-1 kmod-crypto-aes - 3.18.36-1 kmod-crypto-arc4 - 3.18.36-1 kmod-crypto-core - 3.18.36-1 kmod-crypto-ecb - 3.18.36-1 kmod-crypto-hash - 3.18.36-1 kmod-crypto-manager - 3.18.36-1 kmod-crypto-pcompress - 3.18.36-1 kmod-dma-buf - 3.18.36-1 kmod-fs-ext4 - 3.18.36-1 kmod-fs-msdos - 3.18.36-1 kmod-fs-ntfs - 3.18.36-1 kmod-fs-vfat - 3.18.36-1 kmod-gpio-button-hotplug - 3.18.36-1 kmod-gpio-irq - 3.18.36-1 kmod-hid - 3.18.36-1 kmod-hid-generic - 3.18.36-1 kmod-i2c-algo-bit - 3.18.36-1 kmod-i2c-core - 3.18.36-1 kmod-i2c-gpio - 3.18.36-1 kmod-i2c-gpio-custom - 3.18.36-2 kmod-input-core - 3.18.36-1 kmod-input-evdev - 3.18.36-1 kmod-input-uinput - 3.18.36-1 kmod-ip6tables - 3.18.36-1 kmod-ipt-conntrack - 3.18.36-1 kmod-ipt-core - 3.18.36-1 kmod-ipt-nat - 3.18.36-1 kmod-ipv6 - 3.18.36-1 kmod-leds-gpio - 3.18.36-1 kmod-ledtrig-default-on - 3.18.36-1 kmod-ledtrig-gpio - 3.18.36-1 kmod-ledtrig-heartbeat - 3.18.36-1 kmod-ledtrig-morse - 3.18.36-1 kmod-ledtrig-netdev - 3.18.36-1 kmod-ledtrig-netfilter - 3.18.36-1 kmod-ledtrig-oneshot - 3.18.36-1 kmod-ledtrig-timer - 3.18.36-1 kmod-ledtrig-transient - 3.18.36-1 kmod-ledtrig-usbdev - 3.18.36-1 kmod-lib-crc-ccitt - 3.18.36-1 kmod-lib-crc16 - 3.18.36-1 kmod-mac80211 - 3.18.36+2016-01-10-1 kmod-nf-conntrack - 3.18.36-1 kmod-nf-conntrack6 - 3.18.36-1 kmod-nf-ipt - 3.18.36-1 kmod-nf-ipt6 - 3.18.36-1 kmod-nf-nat - 3.18.36-1 kmod-nf-nathelper - 3.18.36-1 kmod-nls-base - 3.18.36-1 kmod-nls-cp437 - 3.18.36-1 kmod-nls-iso8859-1 - 3.18.36-1 kmod-ppp - 3.18.36-1 kmod-pppoe - 3.18.36-1 kmod-pppox - 3.18.36-1 kmod-scsi-core - 3.18.36-1 kmod-slhc - 3.18.36-1 kmod-sound-core - 3.18.36-1 kmod-spi-bitbang - 3.18.36-1 kmod-spi-dev - 3.18.36-1 kmod-spi-gpio - 3.18.36-1 kmod-spi-gpio-custom - 3.18.36-1 kmod-usb-acm - 3.18.36-1 kmod-usb-audio - 3.18.36-1 kmod-usb-core - 3.18.36-1 kmod-usb-hid - 3.18.36-1 kmod-usb-printer - 3.18.36-1 kmod-usb-serial - 3.18.36-1 kmod-usb-serial-ch341 - 3.18.36-1 kmod-usb-serial-cp210x - 3.18.36-1 kmod-usb-serial-ftdi - 3.18.36-1 kmod-usb-serial-pl2303 - 3.18.36-1 kmod-usb-storage - 3.18.36-1 kmod-usb-storage-extras - 3.18.36-1 kmod-usb2 - 3.18.36-1 kmod-video-core - 3.18.36-1 kmod-video-uvc - 3.18.36-1 kmod-video-videobuf2 - 3.18.36-1 kmod-w1 - 3.18.36-1 kmod-w1-gpio-custom - 3.18.36-3 kmod-w1-master-gpio - 3.18.36-1 kmod-w1-slave-therm - 3.18.36-1 libattr - 20150220-1 libavahi-dbus-support - 0.6.31-12 libavahi-nodbus-support - 0.6.31-12 libblobmsg-json - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb libc - 0.9.33.2-1 libcurl - 7.40.0-3.2 libdaemon - 0.14-5 libdbus - 1.9.14-1 libelf1 - 0.161-1 libevent2 - 2.0.22-1 libexpat - 2.1.0-3 libffi - 3.0.13-1 libftdi1 - 1.2-3 libgcc - 4.8-linaro-1 libical - 1.0-1 libip4tc - 1.4.21-1 libip6tc - 1.4.21-1 libiwinfo - 2015-06-01-ade8b1b299cbd5748db1acf80dd3e9f567938371 libjpeg - 9a-1 libjson-c - 0.12-1 libjson-script - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb libncurses - 5.9-2 libnl-tiny - 0.1-4 liboniondebug - 0.4-1 libonioni2c - 0.4-1 libonionmcp23008 - 0.4-1 libonionoledexp - 0.4-1 libonionpwmexp - 0.4-1 libonionrelayexp - 0.4-1 libopenssl - 1.0.2h-1 libpcre - 8.39-1 libpolarssl - 1.3.14-1 libpopt - 1.16-1 libpthread - 0.9.33.2-1 libreadline - 6.3-1 librt - 0.9.33.2-1 libsndfile - 1.0.25-2 libspeexdsp - 1.2rc1-1 libstdcpp - 4.8-linaro-1 libubox - 2015-11-08-10429bccd0dc5d204635e110a7a8fae7b80d16cb libubus - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e libuci - 2015-08-27.1-1 libugpio - 0.0.6-1 libusb-1.0 - 1.0.19-1 libusb-compat - 0.1.4-1 libxtables - 1.4.21-1 logd - 2015-11-22-c086167a0154745c677f8730a336ea9cf7d71031 mjpg-streamer - r182-7 mtd - 21 netifd - 2015-12-16-245527193e90906451be35c2b8e972b8712ea6ab obluez-libs - 5.30-1 obluez-utils - 5.30-1 odhcp6c - 2015-07-29-dc186d6d2b0dd4ad23ca5fc69c00e81f796ff6d9 odhcpd - 2015-11-19-01d3f9d64486ac1daa144848944e877e7f0cb762 oled-exp - 0.4-1 onion-helper - 0.1-1 onion-repo-keys - 0.1-1 onion-sh-lib - 0.1-1 onion-ubus - 0.1-1 opkg - 9c97d5ecd795709c8584e972bfdf3aee3a5b846d-9 oupgrade - 0.1-1 ppp - 2.4.7-6 ppp-mod-pppoe - 2.4.7-6 procd - 2015-10-29.1-d5fddd91b966424bb63e943e789704d52382cc18 pwm-exp - 0.4-1 relay-exp - 0.4-1 rpcd - 2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a rpcd-mod-file - 2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a rpcd-mod-iwinfo - 2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a rpcd-mod-rpcsys - 2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a rsync - 3.1.1-2 sbc - 1.3-1 shellinabox - 2.10-1 swconfig - 10 terminfo - 5.9-2 tmux - 1.9a-1 uboot-envtools - 2014.10-2 ubox - 2015-11-22-c086167a0154745c677f8730a336ea9cf7d71031 ubus - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e ubusd - 2015-05-25-f361bfa5fcb2daadf3b160583ce665024f8d108e uci - 2015-08-27.1-1 uclibcxx - 0.2.4-1 udev - 173-1 uhttpd - 2015-11-08-fe01ef3f52adae9da38ef47926cd50974af5d6b7 uhttpd-mod-ubus - 2015-11-08-fe01ef3f52adae9da38ef47926cd50974af5d6b7 usign - 2015-05-08-cf8dcdb8a4e874c77f3e9a8e9b643e8c17b19131 vsftpd - 3.0.2-4.1 vsftpd-tls - 3.0.2-4.1 wdb40 - 0.2-1 wget - 1.17.1-1 wpad-mini - 2015-03-25-1 zlib - 1.2.8-1 root@Omega-2194:~#dmesg for good measure:
root@Omega-2194:~# dmesg [ 0.000000] Linux version 3.18.36 (zh@ci-onion) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49398) ) #1 Fri Jul 8 19:37:15 UTC 2016 [ 0.000000] MyLoader: sysp=b9606524, boardp=3d5200cc, parts=02ed90e1 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80362120, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=ONION-OMEGA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60880K/65536K available (2511K kernel code, 132K rwdata, 532K rodata, 272K init, 188K bss, 4656K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:83 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is Onion Omega [ 0.370000] Switched to clocksource MIPS [ 0.370000] NET: Registered protocol family 2 [ 0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.380000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.390000] TCP: reno registered [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] NET: Registered protocol family 1 [ 0.410000] PCI: CLS 0 bytes, default 32 [ 0.410000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.440000] msgmni has been set to 118 [ 0.440000] io scheduler noop registered [ 0.450000] io scheduler deadline registered (default) [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.470000] console [ttyATH0] enabled [ 0.470000] bootconsole [early0] disabled [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80 [ 0.490000] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 0.490000] 5 tp-link partitions found on MTD device spi0.0 [ 0.500000] Creating 5 MTD partitions on "spi0.0": [ 0.500000] 0x000000000000-0x000000020000 : "u-boot" [ 0.510000] 0x000000020000-0x000000138e4c : "kernel" [ 0.510000] 0x000000138e4c-0x000000ff0000 : "rootfs" [ 0.520000] mtd: device 2 (rootfs) set to be root filesystem [ 0.520000] 1 squashfs-split partitions found on MTD device rootfs [ 0.530000] 0x000000890000-0x000000ff0000 : "rootfs_data" [ 0.540000] 0x000000ff0000-0x000001000000 : "art" [ 0.540000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.580000] libphy: ag71xx_mdio: probed [ 1.170000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.180000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.180000] TCP: cubic registered [ 1.180000] NET: Registered protocol family 17 [ 1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.200000] 8021q: 802.1Q VLAN Support v1.8 [ 1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.220000] Freeing unused kernel memory: 272K (8037c000 - 803c0000) [ 2.760000] init: Console is alive [ 2.760000] init: - watchdog - [ 5.890000] usbcore: registered new interface driver usbfs [ 5.890000] usbcore: registered new interface driver hub [ 5.900000] usbcore: registered new device driver usb [ 5.960000] SCSI subsystem initialized [ 5.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.970000] ehci-platform: EHCI generic platform driver [ 5.980000] ehci-platform ehci-platform: EHCI Host Controller [ 5.980000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.990000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 6.020000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 6.020000] hub 1-0:1.0: USB hub found [ 6.020000] hub 1-0:1.0: 1 port detected [ 6.030000] usbcore: registered new interface driver usb-storage [ 6.870000] init: - preinit - [ 7.650000] random: procd urandom read with 12 bits of entropy available [ 10.820000] mount_root: loading kmods from internal overlay [ 11.220000] jffs2: notice: (338) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 11.240000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 11.250000] block: extroot: not configured [ 11.350000] jffs2: notice: (335) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 11.370000] mount_root: loading kmods from internal overlay [ 11.570000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 11.580000] block: extroot: not configured [ 11.590000] mount_root: switching to jffs2 overlay [ 11.660000] procd: - early - [ 11.660000] procd: - watchdog - [ 12.500000] procd: - ubus - [ 13.510000] procd: - init - [ 16.430000] NET: Registered protocol family 10 [ 16.450000] ntfs: driver 2.1.31 [Flags: R/O MODULE]. [ 16.520000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.550000] i2c /dev entries driver [ 16.550000] Custom GPIO-based I2C driver version 0.1.1 [ 16.560000] i2c-gpio i2c-gpio.0: using pins 21 (SDA) and 20 (SCL) [ 16.600000] Linux video capture interface: v2.00 [ 16.630000] hidraw: raw HID events driver (C) Jiri Kosina [ 16.750000] Bluetooth: Core ver 2.19 [ 16.750000] NET: Registered protocol family 31 [ 16.750000] Bluetooth: HCI device and connection manager initialized [ 16.760000] Bluetooth: HCI socket layer initialized [ 16.760000] Bluetooth: L2CAP socket layer initialized [ 16.770000] Bluetooth: SCO socket layer initialized [ 16.780000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.780000] Bluetooth: BNEP filters: protocol multicast [ 16.790000] Bluetooth: BNEP socket layer initialized [ 16.790000] usbcore: registered new interface driver btusb [ 16.800000] usbcore: registered new interface driver cdc_acm [ 16.810000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 16.820000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 16.830000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 16.840000] Bluetooth: HCI UART driver ver 2.2 [ 16.840000] Bluetooth: HCI H4 protocol initialized [ 16.850000] Bluetooth: HCI BCSP protocol initialized [ 16.860000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 16.860000] Bluetooth: HIDP socket layer initialized [ 16.870000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.890000] nf_conntrack version 0.5.0 (955 buckets, 3820 max) [ 16.940000] Bluetooth: RFCOMM TTY layer initialized [ 16.940000] Bluetooth: RFCOMM socket layer initialized [ 16.940000] Bluetooth: RFCOMM ver 1.11 [ 16.970000] usbcore: registered new interface driver ums-alauda [ 16.980000] usbcore: registered new interface driver ums-cypress [ 16.980000] usbcore: registered new interface driver ums-datafab [ 16.990000] usbcore: registered new interface driver ums-freecom [ 17.000000] usbcore: registered new interface driver ums-isd200 [ 17.010000] usbcore: registered new interface driver ums-jumpshot [ 17.020000] usbcore: registered new interface driver ums-karma [ 17.030000] usbcore: registered new interface driver ums-sddr09 [ 17.030000] usbcore: registered new interface driver ums-sddr55 [ 17.040000] usbcore: registered new interface driver ums-usbat [ 17.050000] usbcore: registered new interface driver usbhid [ 17.060000] usbhid: USB HID core driver [ 17.070000] usbcore: registered new interface driver usblp [ 17.080000] usbcore: registered new interface driver usbserial [ 17.090000] usbcore: registered new interface driver usbserial_generic [ 17.090000] usbserial: USB Serial support registered for generic [ 17.110000] usbcore: registered new interface driver uvcvideo [ 17.120000] USB Video Class driver (1.1.1) [ 17.130000] Driver for 1-wire Dallas network protocol. [ 17.160000] xt_time: kernel timezone is -0000 [ 17.230000] usbcore: registered new interface driver ch341 [ 17.230000] usbserial: USB Serial support registered for ch341-uart [ 17.240000] usbcore: registered new interface driver cp210x [ 17.250000] usbserial: USB Serial support registered for cp210x [ 17.250000] usbcore: registered new interface driver ftdi_sio [ 17.260000] usbserial: USB Serial support registered for FTDI USB Serial Device [ 17.390000] usbcore: registered new interface driver pl2303 [ 17.390000] usbserial: USB Serial support registered for pl2303 [ 17.400000] PPP generic driver version 2.4.2 [ 17.410000] NET: Registered protocol family 24 [ 17.430000] usbcore: registered new interface driver snd-usb-audio [ 17.520000] ath: EEPROM regdomain: 0x0 [ 17.520000] ath: EEPROM indicates default country code should be used [ 17.520000] ath: doing EEPROM country->regdmn map search [ 17.520000] ath: country maps to regdmn code: 0x3a [ 17.520000] ath: Country alpha2 being used: US [ 17.520000] ath: Regpair used: 0x3a [ 17.530000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.540000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 30.810000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready [ 31.710000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.270000] wlan0: authenticate with xxxxxxxxxxxxx [ 35.290000] wlan0: send auth to xxxxxxxxxxxxx(try 1/3) [ 35.300000] wlan0: authenticated [ 35.340000] wlan0: associate with xxxxxxxxxxxxx (try 1/3) [ 35.350000] wlan0: RX AssocResp from xxxxxxxxxxxxx (capab=0x11 status=0 aid=7) [ 35.350000] wlan0: associated [ 35.360000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.400000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready [ 38.770000] wlan0: deauthenticating from xxxxxxxxxxxxx by local choice (Reason: 3=DEAUTH_LEAVING) [ 39.710000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.750000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 44.910000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready [ 45.200000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 46.990000] wlan0: authenticate with xxxxxxxxxxxxx [ 47.010000] wlan0: send auth to xxxxxxxxxxxxx (try 1/3) [ 47.020000] wlan0: authenticated [ 47.040000] wlan0: associate with xxxxxxxxxxxxx (try 1/3) [ 47.040000] wlan0: RX AssocResp from xxxxxxxxxxxxx (capab=0x11 status=0 aid=7) [ 47.050000] wlan0: associated [ 47.050000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 47.100000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready [ 56.720000] random: nonblocking pool is initialized
-
@bearer said in USB port stopped working:
Suggestion on how to determine if its a hardware or software failure?
Check out the guidelines
-
@bearer Can you try using another USB device on your Dock? Maybe a USB drive or a webcam?
-
Aye, I've tried several usb drives, two cameras and a few usb hubs; there is zero response from the devices, nor any entries in the dmesg output for having plugged devices in or out. I've also borrowed a different dock (stil waiting for my battery dock to arrive) and same results with another dock. It was literally just sitting on my desk minding its own business, broadcasting an eddystone URL over bluetooth when the broadcasts stopped without any other adverse effects to the Omega board.
Ah, but its a moot point I guess, pretty sure it arrived more than 35 days ago; so guess its going in the bin and I'll wait for the Omega2s to arrive. At least I have a dock though!
