Omega Thingiverse Group
-
I created a Thingiverse group for anyone that wants to upload a cool case design or anything really.
I wasn't sure if I should go with Onion as the name or Omega. I decided Omega because it's more specific.
Here's the link to the group:
http://www.thingiverse.com/groups/omegaFeel free to join it.
I also uploaded a case design for the Omega2 Power dock and OLED. I haven't printed it to test it out yet so I wouldn't recommend printing it until I take the fall first.
http://www.thingiverse.com/thing:2040386Anyways, it would be cool if it became a fun little community for Omega printing projects.
-
Nice case, well done.
-
Thanks! It's actually the first thing I have designed. Well it could technically be the third. I designed it, then a small case for a flash drive, and then redesigned the omega case because of a very obvious flaw.
I think it turned out really well though. I was planning on printing it tomorrow but it looks like some things were delayed in shipping and shouldn't arrive until Thursday now.
-
it will be interesting to see if the on/off switch is actually able to be switched on/off due to thickness of material for the sides
-
@Douglas-Kryder I'm also curious about this. The walls are 2 mm thick and the board itself should be 1mm from the inside wall. The switch does have a small overhang on the board so I think it should be fine but I guess I will find out.
-
Hi.
Has this design been removed from Thingyverse?
Just get a 404 error when I click on the link.
Thanks
