Omega Thingiverse Group
I created a Thingiverse group for anyone that wants to upload a cool case design or anything really.
I wasn't sure if I should go with Onion as the name or Omega. I decided Omega because it's more specific.
Here's the link to the group:
Feel free to join it.
I also uploaded a case design for the Omega2 Power dock and OLED. I haven't printed it to test it out yet so I wouldn't recommend printing it until I take the fall first.
Anyways, it would be cool if it became a fun little community for Omega printing projects.
David Wickenden last edited by
Nice case, well done.
Thanks! It's actually the first thing I have designed. Well it could technically be the third. I designed it, then a small case for a flash drive, and then redesigned the omega case because of a very obvious flaw.
I think it turned out really well though. I was planning on printing it tomorrow but it looks like some things were delayed in shipping and shouldn't arrive until Thursday now.
Douglas Kryder last edited by
it will be interesting to see if the on/off switch is actually able to be switched on/off due to thickness of material for the sides
@Douglas-Kryder I'm also curious about this. The walls are 2 mm thick and the board itself should be 1mm from the inside wall. The switch does have a small overhang on the board so I think it should be fine but I guess I will find out.
Has this design been removed from Thingyverse?
Just get a 404 error when I click on the link.