1. Home
  2. Omega Talk
  3. mjpg_streamer would like to capture stills on SD card

mjpg_streamer would like to capture stills on SD card

  • WereCatf

    @Jo-Kritzinger The package I gave above includes output_file.so:

    opkg remove mjpg-streamer
cd /tmp
wget https://dl.dropboxusercontent.com/u/11811685/omega2-stuff/mjpg-streamer_r182-8_mipsel_24kc.ipk
opkg install mjpg-streamer_r182-8_mipsel_24kc.ipk --force-checksum

    Just ignore the complaint about checksum-error, it won't match any of the packages you have in the repos, since it comes from my own repo.

    Also, you can fork mjpeg_streamer into background by adding -b to the list of parameters you give to it. Just for future reference, it's sometimes helpful to check what parameters an app supports by calling it with --help...

    0 J 1 Reply
  • J

    @WereCatf Thanks for the response, however, I get an error:

    opkg install mjpg-streamer_r182-8_mipsel_24kc.ipk --force-checksum
    Installing mjpg-streamer (r182-8) to root...
    Ignored mjpg-streamer sha256sum mismatch.
    Collected errors:

    • satisfy_dependencies_for: Cannot satisfy the following dependencies for mjpg-streamer:
    • libv4l *
    • opkg_install_cmd: Cannot install package jpg-streamer.
    0 WereCatf 1 Reply
  • WereCatf

    @Jo-Kritzinger libv4l is available from the LEDE-repos.

    0 J 1 Reply
  • J

    @WereCatf thanks. Did not see it in opkg. New to this world. I believe it is retrievable using rsync? Would appreciate a pointer in the right direction.

    0 WereCatf 1 Reply
  • WereCatf

    @Jo-Kritzinger Add src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mips_24kc/packages to /etc/opkg/distfeeds.conf and do opkg update

    1 J 2 Replies
  • J

    @WereCatf awesome, thanks. Will try.

    0
  • J

    @WereCatf Tried and I get 100's of lines similar to this:

    Package zope-interface version 4.3.2-1 has no valid architecture, ignoring.
    Package zsh version 5.2-1 has no valid architecture, ignoring.

    Then it ends with:
    Trace/breakpoint trap

    0 WereCatf 1 Reply
  • WereCatf

    @Jo-Kritzinger You must have done something wrong, it definitely shouldn't spit out such things. Are you sure you didn't typo anything?

    0 J 1 Reply
  • J

    @WereCatf
    Modified distfieeds:
    root@Omega-xxxx:~# cat /etc/opkg/distfeeds.conf
    RESULT

    #src/gz reboot_base http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/base
#src/gz reboot_onion http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/onion
# src/gz reboot_luci http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/luci
# src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/packages
# src/gz reboot_routing http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/routing
# src/gz reboot_telephony http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/telephony
src/gz omega2_core http://repo.onion.io/omega2/packages/core
src/gz omega2_base http://repo.onion.io/omega2/packages/base
src/gz omega2_packages http://repo.onion.io/omega2/packages/packages
src/gz omega2_onion http://repo.onion.io/omega2/packages/onion
src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mips_24kc/packages

    Then I rand the update:::
    /etc/opkg# opkg update
    RESULT:

    Updated list of available packages in /var/opkg-lists/omega2_core
Downloading http://repo.onion.io/omega2/packages/core/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/base/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_base
Downloading http://repo.onion.io/omega2/packages/base/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_packages
Downloading http://repo.onion.io/omega2/packages/packages/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/onion/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_onion
Downloading http://repo.onion.io/omega2/packages/onion/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_packages
Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/packages/Packages.sig
Signature check passed.

    This is how I installed:
    opkg install mjpg-streamer_r182-8_mipsel_24kc.ipk --force-checksum
    That gave all the weird results

    0 WereCatf 1 Reply
  • WereCatf

    @Jo-Kritzinger Oh, right, it was my own mistake. It should be src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/packages not src/gz reboot_packages http://downloads.lede-project.org/snapshots/packages/mips_24kc/packages -- just change mips to mipsel.

    0 J 4 Replies
  • J

    @WereCatf OK, tried. Still an issue. I modified the line added to disftfeeds to reflect mipsel and ran the opkg update. Still got 100's of these type of messages

    Package zoneinfo-southamerica version 2016j-1 has no valid architecture, ignoring.
Package zope-interface version 4.3.2-1 has no valid architecture, ignoring.
Package zsh version 5.2-1 has no valid architecture, ignoring.

    but it ended with

    Updated list of available packages in /var/opkg-lists/omega2_core
Downloading http://repo.onion.io/omega2/packages/core/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/base/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_base
Downloading http://repo.onion.io/omega2/packages/base/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_packages
Downloading http://repo.onion.io/omega2/packages/packages/Packages.sig
Signature check passed.
Downloading http://repo.onion.io/omega2/packages/onion/Packages.gz
Updated list of available packages in /var/opkg-lists/omega2_onion
Downloading http://repo.onion.io/omega2/packages/onion/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/reboot_packages
Downloading http://downloads.lede-project.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
Signature check passed.

    Then
    opkg install mjpg-streamer_r182-8_mipsel_24kc.ipk --force-checksum
    That resulted in
    Illegal instruction

    Time for a factory reset?

    0 J 1 Reply
  • J

    @WereCatf OK! Downloaded and installed following a reboot of the Omega. Seems the Omega was in an odd state.

    0
  • J

    This post is deleted!
    0
  • J

    @Jo-Kritzinger By the by, once you have launched mjpg_stream, is there a neat way of stopping it or is it just Ctrl-C that results in

    setting signal to stop
 i: cleaning up ressources allocated by input thread
force cancellation of threads and cleanup resources
Segmentation fault
    0
  • J

    @WereCatf

    I have lost mjpg-streamer for some reason but it's weird....
    When I try to call it I get a
    -ash: mjpg-streamer: not found
    But....

    root@Omega-xxxx:~# find / -name mjpg-streamer
/etc/config/mjpg-streamer
/etc/init.d/mjpg-streamer
/overlay/upper/etc/config/mjpg-streamer
/overlay/upper/etc/init.d/mjpg-streamer
root@Omega-xxxx:~# opkg list-installed | grep mjpg-streamer
mjpg-streamer - r182-8

    I have removed and re-installed. No luck.

    Any ideas?

    Ooh, HAHA, I'm such a dummy! :rolling_eyes: . the package is mjpg-streamer but the app is mjpg_streamer. 😬

    0
sd card 38 camera 29 mjpg-streamer 10
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.