We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Onion omega has no name



  • Hello
    After updating uboot, it seems that the mac address is not recognized as my omega is named Omega-:
    So nothing works, only eth0 is fine.
    The system is build on my laptop
    dmesg:

    [    0.000000] Board has DDR2
    [    0.000000] Analog PMU set to hw control
    [    0.000000] Digital PMU set to hw control
    [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
    [    0.000000] MIPS: machine is Onion Omega2+
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 08000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] On node 0 totalpages: 32768
    [    0.000000] free_area_init_node: node 0, pgdat 803ca4c0, node_mem_map 81000000
    [    0.000000]   Normal zone: 256 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
    [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
    [    0.000000] Kernel command line: console=ttyS1,115200 rootfstype=squashfs,jffs2
    [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
    [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Writing ErrCtl register=0006b400
    [    0.000000] Readback ErrCtl register=0006b400
    [    0.000000] Memory: 125488K/131072K available (3103K kernel code, 145K rwdata, 740K rodata, 164K init, 196K bss, 5584K reserved, 0K cma-reserved)
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:256
    [    0.000000] intc: using register map from devicetree
    [    0.000000] CPU Clock: 580MHz
    [    0.000000] clocksource_probe: no matching clocksources found
    [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
    [    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
    [    0.007522] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
    [    0.070043] pid_max: default: 32768 minimum: 301
    [    0.074639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.080976] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.094661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.104172] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.110187] pinctrl core: initialized pinctrl subsystem
    [    0.115948] NET: Registered protocol family 16
    [    0.140786] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.146344] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.151760] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.158365] i2c-mt7621 10000900.i2c: clock 100 kHz
    [    0.164125] clocksource: Switched to clocksource MIPS
    [    0.170690] NET: Registered protocol family 2
    [    0.175906] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.182597] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.188784] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.194976] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.200574] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.206967] NET: Registered protocol family 1
    [    0.211196] PCI: CLS 0 bytes, default 32
    [    0.217516] Crashlog allocated RAM at address 0x3f00000
    [    0.238909] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.244566] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.257331] io scheduler noop registered
    [    0.261073] io scheduler deadline registered (default)
    [    0.267180] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
    [    0.274631] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
    [    0.283825] console [ttyS1] disabled
    [    0.287311] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
    [    0.295778] console [ttyS1] enabled
    [    0.302777] bootconsole [early0] disabled
    [    0.311447] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
    [    0.322010] spi-mt7621 10000b00.spi: sys_freq: 193333333
    [    0.332053] m25p80 spi32766.0: using chunked io (size=31)
    [    0.337618] m25p80 spi32766.0: w25q256 (32768 Kbytes)
    [    0.342776] 4 ofpart partitions found on MTD device spi32766.0
    [    0.348705] Creating 4 MTD partitions on "spi32766.0":
    [    0.353922] 0x000000000000-0x000000030000 : "u-boot"
    [    0.360751] 0x000000030000-0x000000040000 : "u-boot-env"
    [    0.368068] 0x000000040000-0x000000050000 : "factory"
    [    0.375128] 0x000000050000-0x000002000000 : "firmware"
    [    0.423031] 2 uimage-fw partitions found on MTD device firmware
    [    0.429082] 0x000000050000-0x000000197a3a : "kernel"
    [    0.435802] 0x000000197a3a-0x000002000000 : "rootfs"
    [    0.442625] mtd: device 5 (rootfs) set to be root filesystem
    [    0.448509] 1 squashfs-split partitions found on MTD device rootfs
    [    0.454804] 0x0000005d0000-0x000002000000 : "rootfs_data"
    [    0.471948] rt3050-esw 10110000.esw: link changed 0x00
    [    0.479750] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
    [    0.488402] i2c /dev entries driver
    [    0.492513] mt7621_wdt 10000120.watchdog: Initialized
    [    0.499242] NET: Registered protocol family 10
    [    0.507956] NET: Registered protocol family 17
    [    0.512556] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    0.525428] 8021q: 802.1Q VLAN Support v1.8
    [    0.537234] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
    [    0.545366] Freeing unused kernel memory: 164K (803e7000 - 80410000)
    [    1.827126] init: Console is alive
    [    1.830796] init: - watchdog -
    [    3.901073] kmodloader: loading kernel modules from /etc/modules-boot.d/*
    [    4.050221] usbcore: registered new interface driver usbfs
    [    4.055952] usbcore: registered new interface driver hub
    [    4.061439] usbcore: registered new device driver usb
    [    4.106840] SCSI subsystem initialized
    [    4.117467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    4.125896] ehci-platform: EHCI generic platform driver
    [    4.141565] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
    [    4.148378] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
    [    4.153710] ehci-platform 101c0000.ehci: EHCI Host Controller
    [    4.159588] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
    [    4.167761] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
    [    4.184174] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
    [    4.191681] hub 1-0:1.0: USB hub found
    [    4.195961] hub 1-0:1.0: 1 port detected
    [    4.204911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    4.212810] ohci-platform: OHCI generic platform driver
    [    4.218479] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
    [    4.225447] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
    [    4.233560] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
    [    4.299325] hub 2-0:1.0: USB hub found
    [    4.303577] hub 2-0:1.0: 1 port detected
    [    4.320795] MTK MSDC device init.
    [    4.364305] mtk-sd: MediaTek MT6575 MSDC Driver
    [    4.374508] sdhci: Secure Digital Host Controller Interface driver
    [    4.380798] sdhci: Copyright(c) Pierre Ossman
    [    4.385804] mtk-sd 10130000.sdhci: no support for card's volts
    [    4.391735] mmc0: error -22 whilst initialising SDIO card
    [    4.398317] sdhci-pltfm: SDHCI platform and OF driver helper
    [    4.408714] usbcore: registered new interface driver usb-storage
    [    4.418050] mtk-sd 10130000.sdhci: no support for card's volts
    [    4.423982] mmc0: error -22 whilst initialising MMC card
    [    4.430200] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
    [    4.440106] init: - preinit -
    [    4.684244] mtk-sd 10130000.sdhci: no support for card's volts
    [    4.690181] mmc0: error -22 whilst initialising SDIO card
    [    4.782029] mtk-sd 10130000.sdhci: no support for card's volts
    [    4.788016] mmc0: error -22 whilst initialising MMC card
    [    4.976919] mtk-sd 10130000.sdhci: no support for card's volts
    [    4.982855] mmc0: error -22 whilst initialising SDIO card
    [    5.014239] mtk-sd 10130000.sdhci: no support for card's volts
    [    5.020176] mmc0: error -22 whilst initialising MMC card
    [    5.374626] rt3050-esw 10110000.esw: link changed 0x00
    [    5.557656] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
    [    8.370983] rt3050-esw 10110000.esw: link changed 0x01
    [    8.865313] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [    8.882873] mount_root: switching to jffs2 overlay
    [    8.895077] urandom-seed: Seeding with /etc/urandom.seed
    [    9.031205] procd: - early -
    [    9.034975] procd: - watchdog -
    [    9.835867] procd: - watchdog -
    [    9.839340] procd: - ubus -
    [   10.236677] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.246364] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.255659] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.265223] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.274475] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.283768] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.293512] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
    [   10.303139] procd: - init -
    [   10.908664] kmodloader: loading kernel modules from /etc/modules.d/*
    [   10.943997] ntfs: driver 2.1.32 [Flags: R/O MODULE].
    [   11.012546] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   11.038778] gdma-rt2880 10002800.gdma: revision: 3, channels: 16
    [   11.089674] Linux video capture interface: v2.00
    [   11.106339] hidraw: raw HID events driver (C) Jiri Kosina
    [   11.131702] ralink-i2s 10000a00.i2s: mclk 480KHz
    [   11.139697] max98090 0-0010: Failed to reset codec: -6
    [   11.145170] max98090 0-0010: Failed to read device revision: -1
    [   11.151176] max98090 0-0010: ASoC: failed to probe component -1
    [   11.157847] asoc-simple-card sound: ASoC: failed to instantiate card -1
    [   11.164720] asoc-simple-card: probe of sound failed with error -1
    [   11.194860] Bluetooth: Core ver 2.21
    [   11.198601] NET: Registered protocol family 31
    [   11.203106] Bluetooth: HCI device and connection manager initialized
    [   11.209607] Bluetooth: HCI socket layer initialized
    [   11.214571] Bluetooth: L2CAP socket layer initialized
    [   11.219724] Bluetooth: SCO socket layer initialized
    [   11.227148] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   11.232548] Bluetooth: BNEP filters: protocol multicast
    [   11.237939] Bluetooth: BNEP socket layer initialized
    [   11.249735] usbcore: registered new interface driver btusb
    [   11.259300] usbcore: registered new interface driver cdc_acm
    [   11.265130] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [   11.277126] Bluetooth: HCI UART driver ver 2.3
    [   11.281648] Bluetooth: HCI UART protocol H4 registered
    [   11.286930] Bluetooth: HCI UART protocol BCSP registered
    [   11.296627] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [   11.302657] Bluetooth: HIDP socket layer initialized
    [   11.310901] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   11.331991] nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
    [   11.362525] Bluetooth: RFCOMM TTY layer initialized
    [   11.367573] Bluetooth: RFCOMM socket layer initialized
    [   11.372809] Bluetooth: RFCOMM ver 1.11
    [   11.391965] usbcore: registered new interface driver ums-alauda
    [   11.400975] usbcore: registered new interface driver ums-cypress
    [   11.410181] usbcore: registered new interface driver ums-datafab
    [   11.419140] usbcore: registered new interface driver ums-freecom
    [   11.428278] usbcore: registered new interface driver ums-isd200
    [   11.437505] usbcore: registered new interface driver ums-jumpshot
    [   11.446574] usbcore: registered new interface driver ums-karma
    [   11.456361] usbcore: registered new interface driver ums-sddr09
    [   11.465533] usbcore: registered new interface driver ums-sddr55
    [   11.475007] usbcore: registered new interface driver ums-usbat
    [   11.487197] usbcore: registered new interface driver usbhid
    [   11.492859] usbhid: USB HID core driver
    [   11.500547] usbcore: registered new interface driver usblp
    [   11.514578] usbcore: registered new interface driver usbserial
    [   11.520607] usbcore: registered new interface driver usbserial_generic
    [   11.527400] usbserial: USB Serial support registered for generic
    [   11.546027] Driver for 1-wire Dallas network protocol.
    [   11.572588] xt_time: kernel timezone is -0000
    [   11.579411] usbcore: registered new interface driver ch341
    [   11.585189] usbserial: USB Serial support registered for ch341-uart
    [   11.594011] usbcore: registered new interface driver cp210x
    [   11.599881] usbserial: USB Serial support registered for cp210x
    [   11.609441] usbcore: registered new interface driver ftdi_sio
    [   11.615476] usbserial: USB Serial support registered for FTDI USB Serial Device
    [   11.637692] usbcore: registered new interface driver pl2303
    [   11.643479] usbserial: USB Serial support registered for pl2303
    [   11.655055] PPP generic driver version 2.4.2
    [   11.662655] NET: Registered protocol family 24
    [   11.680936] usbcore: registered new interface driver snd-usb-audio
    [   11.702795] usbcore: registered new interface driver uvcvideo
    [   11.708701] USB Video Class driver (1.1.1)
    [   11.721555] usbcore: registered new interface driver option
    [   11.727442] usbserial: USB Serial support registered for GSM modem (1-port)
    [   11.740046] kmodloader: done loading kernel modules from /etc/modules.d/*
    [   12.416295] random: jshn: uninitialized urandom read (4 bytes read, 21 bits of entropy available)
    [   12.512473] random: ubusd: uninitialized urandom read (4 bytes read, 21 bits of entropy available)
    [   72.389993] random: nonblocking pool is initialized 
    

    fw_printenv:

    root@Omega-:/# fw_printenv 
    bootcmd=tftp
    bootdelay=5
    baudrate=115200
    ethaddr="00:AA:BB:CC:DD:10"
    ipaddr=192.168.8.8
    serverip=192.168.8.1
    stdin=serial
    stdout=serial
    stderr=serial
    

    If i get into uboot to change ethaddr, it tells me it can't override it.


  • administrators

    @Gnichi-Mohamed which firmware are you using? It looks like there's a few issues in the kernel messages...



  • @Lazar-Demin I am compiling my own image from the onion LEDE repo.
    I compiled a new Uboot image that allowed me to rewrite the mac address but still the name of my omega doesn't show and there is no wifi interface with ifconfig -a.
    Only ethernet works


  • administrators

    @Gnichi-Mohamed Ah ok, please edit your topic title to make that clear.
    You'll need the hostname-tool package to update your Omega's name based on the MAC address. It's in the Onion package repo.



  • @Lazar-Demin Thank you lazar, I will add it.


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.