UFL antenna connector?
-
Could some address this? If I add a directional antenna to the pads on the Omega what will be the affect to:
Setup of as AP
Setup as Extender
Wondering what happens if you add directional antenna to the board will my router no longer be able to talk to the Omega. Meaning the addition of the directional antenna cancels the AP?
-
@Rudy-Trujillo You question is a bit vague. I suspect you are concerned that using an Onion with a directional antenna will mean the Onion can no longer connect with a router which is located outside of the broadcast envelope of the directional antenna. This may be the case, as a lot of things can affect the effective signal range of wifi... the type of wall(s) in the signal path, whether the channel is clear or crowded by neighbors' equipment etc. Maybe you can get by with adding a better antenna to your router.
Possibly no one has used a Onion yet with an external antenna. There are many examples of other routers doing what you want to do - I use TP-Link portable routers refitted with directional antennas as repeaters to control various Wifi cameras 300 - 500ft away. I see no software or hardware reason why the Onions can't do the same. Guys are doing asynchronous Wifi video up to a km away with Raspberry Pis. It works, even in HD video. I am waiting for ordered connectors and other antenna parts to range test some Onions. Standby buddy.
Worse case, you might need a second Onion with another directional antenna pointed at the router. Otherwise, find a repeater that supports two external antennas.
-
I'm looking to enclose my onion in a metal enclosure, so I'll need at attach an external antenna. What is the manufacturer part number of the connector I'll have to solder on?
-
I hate to nitpick, guys, but the board is called the Omega!
We, the company, are Onion
-
Kind of noticed that loose naming usage on here but didn't want to be the on to nitpick Onion the bringer of Omega, all hail.
-
@Lazar-Demin Your web site product photos of the boards do say "Onion". Not a nitpick, just got it. My apology, these boards are Omegas and you are Onion Corporation.
-
@Jonathan-Rizzo said:
I'm looking to enclose my onion in a metal enclosure, so I'll need at attach an external antenna. What is the manufacturer part number of the connector I'll have to solder on?
Ditto. I am looking at mounting my Omega in a metal enclosure and weather proofing it. I I assume the UFL connect is similar to one of these
-
@T-NT Yup, that's what the U.FL connector looks like.
-
Yeah I solder one to the other Omega I got waiting for some cables now though.
-
This post is deleted!