We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Using WireShark to listen to your Omega2 network activity



  • If you want to be able to examine your Omega2(S)(+) network traffic, you can use these steps to use WireShark to listen to a tcpdump via ssh from your Omega. I run WireShark on Ubuntu 19 / 20 but this also works on Windoze.

    On Ubuntu:

    mkfifo /tmp/pipe
    sudo apt install wireshark-qt
    sudo chmod +x /usr/bin/dumpcap
    #The next command allows you to run wireshark as a user instead of sudo
    sudo dpkg-reconfigure wireshark-common
    wireshark -k -i /tmp/pipe & ssh root@192.168.1.168 "tcpdump -i any -s 0 -U -w - not port 22" > /tmp/pipe

    Wireshark will show its main window obscuring the fact that on the terminal your Omega2 is requesting a password. So switch back to the terminal and enter the root password for your Omega2, then back to WireShark and you'll start to see the traffic roll in.

    Since this process uses ssh, you can leverage ssh certificate authentication instead so you don't need to enter a password.


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.