Red light after firmware upgrade (oupgrade)
-
Hi:
I a n00b to the omega ecosystem.
I have a Omega 2S+ board. After initial setup, I ssh'ed to this box and ran oupgrade.
This was successful - however now, the red LED turns on and remains on.
The red LED also remains on after re-logging on (log off, log on again using ssh) and after rebooting (using the reboot command).
Here are the current stats:
root@Omega-1BFA:~# oupgrade -c
Device Firmware Version: 0.3.4 b259
Checking latest version online...
url: https://api.onioniot.com/firmware/omega2pro/stable
Repo Firmware Version: 0.3.4 b259
Comparing version numbers
Device firmware is up to date!root@Omega-1BFA:~# oupgrade -v
Device Firmware Version: 0.3.4 b259
The only weird thing I see is that oupgrade downloaded a firmware for omega2pro (and this is a omega 2S+). Maybe this is a bug in oupgrade ?
At this point - a
ny way to fix this red light issue ?Best regards,
-J
-
Hi - the red light issue fixed itself when I did a hard reboot (meaning unplugged the power and plugged it back again).
Prior to this, I was doing soft reboots.
I'm leaving this post up in case anyone else has the same issue.
-
@javadesigner You have there an Omega2Pro, this device uses the Omega2S+ SoC on a board that also incorporates additional 8K storage LiPO etc.
The LED behaviour you report is a known behaviour of this device, you need to update u-boot to version 1.1.3 or above. Here is the documentation on how to do this.