Coding using C on the Onion Omega

huxflux

Made further progress. By hunting down onion-debug.c, onion-debug.h, onion-spi.c and onion-spi.h on github.com/OnionIoT/ I'm now able to compile and link my main.c with gcc main.c onion-spi.c onion-debug.c

huxflux

Looked some more into this. I'm not sure I understand the logic here.

When I execute opkg install libonionspi it copies libonionspi.so to /usr/lib/. This is the dynamic library which the linker looks to when we run gcc main.c -lonionspi. What I don't understand is, where's the header-file? They tell us to #include <onion-spi.h> (https://wiki.onion.io/Documentation/Libraries/SPI_Library_C).

As seen above I found those files on https://github.com/OnionIoT, but they're not updated (missing some functions).

Clearly I must be missing something vital here. I don't understand why I can't develop stuff on the Onion Omega itself. 8GB of hdd-space, 64MB RAM and I could add swap space if memory ever became a problem.

Still trying to avoid cross-compilation..

Theodore Borromeo

@huxflux
You could symlink your /usr/lib headers into whatever system header/compilation header libraries gcc on the device is expecting. Of course, you could also try to directly #include to the /usr/lib folder (NOT RECOMMENDED, i don't know why, but i'm pretty sure this is frowned upon by some neck-beard somewhere)

In any case, you could also be dealing with the fact that the OnionIOT headers are exported kernel headers, which may or may not work if they are stripped of something the kernel headers might have implicitly expected. But now we're descending into the madness of kernel vs exported headers, and I don't want to go down that path.

In any case, the cross-compilation toolchains aren't there because these embedded devices can't do it, so much as it ensures that if you can set up a cross-compilation toolchain that you can ensure OTHERS can develop just as you do for the same expected target. Embedded systems long ago (really since breaking the GHz mark) could handle on device compilation. However, it would take a while and development cycles are generally precious, therefore, most prefer to run it on a beefy machine.

That notwithstanding, I do think that there are more and more merits to on device compilation nowadays. My biggest wish is to run a linux system on a beefy but tiny AP like Onion Omega, and then connect to a virtual IDE hosted within it to actually develop from a pristine iPad or the like. This would make it so that I CAN have linux IDEs while using my sexy idevice.

Hope this helps. I'll look around to see what the latest is with on device development and see if I can't get you a more clear answer. Unless linux is built on the system itself, I don't have the faintest idea how to get development environments built without cross compilation though. Bitbake and openwrt are the best solutions to cross compilation, in that order, and even they eschew on device development.

huxflux

Thanks for replying!

We already can compile on the Onion Omega using the python-light package. If you add some more space through USB, you can even install gcc on the Onion Omega. There are no problems whatsoever using Vim and compile C-code on this unit. The problem is when I want to use their libraries libonionspi and/or libonioni2c. For some reason, they don't include the header-files when you install libonionspi and/or libonioni2c.

The reason I want to code directly on the Onion Omega is because it's fast. I just want to write small programs that deal with the LEDS or read/write stuff to the GPIO's.

I could of course go without their libraries and go low-level myself. I might do it. Or maybe I should just go with Python. Or maybe go the cross-compilation route. We'll see

Kit Bishop

@huxflux When you install a library (like libonionspi and/or libonioni2c) all that is installed is the compiled and linked code of the relevant library - it does not include any of the sources - in particular the *.h files needed to reference the libraries. You need to ensure that the *.h files are accessible when you build your program - either put them in the same directory as your source file or use the -I<directory> option to point to the include files. If you do this, you should not need to separately and additionally compile the *.c files for the library.

Chris McCaslin

@huxflux Look at the cloud it just came out, it gives you the ability to compile c or c++ programs for your omega.

Kit Bishop

@Chris-McCaslin Not yet it doesn't as far as I can see. Though according to https://community.onion.io/topic/677/the-onion-roadmap it should be available early this month (May)

huxflux

@Kit Bishop I tried compiling using only the .h-files with gcc main.c -loniondebug -lonionspi. The linker complains about not finding the reference to one of the functions. If I edit libonionspi.so I can see the name of the function is there. So I'm at loss to what's going on here. It compiles, but doesn't link.

Kit Bishop

@huxflux Sorry not to be of any more help. I haven't tried compiling on the Omega itself. My earlier comments were just possible suggestions

Theodore Borromeo

@huxflux Ahhhh, I see.

Is https://github.com/OnionIoT/spi-gpio-driver/blob/master/include/onion-spi.h what you are looking for then? I think if you download the files in this repo, and they are in somewhere like "/usr/include", you would then be able to satisfy the

#include <onion-spi.h>

dependency, right?

Theodore Borromeo

@Lazar-Demin @Boken-Lin , can you all update https://wiki.onion.io/Documentation/Libraries/SPI_Library_C to include where to get and place the required spi files for this tutorial? Perhaps also ensure that the repo providing the spi driver for C code is definitely up to date?

Lazar Demin

@Theodore-Borromeo All of the articles in the Library Documentation section have been updated to point to the GitHub repo where the source code can be found.
All of the repos are definitely up to date, that's where the source code for our firmware comes from!

One more note:
Keep your eyes peeled in the next few weeks for the Cloud Compile feature to be released. You can avoid having GCC installed on your Omega and pulling code from all over the place. You'll be able to upload your source code, the cloud will cross-compile it for you, and then you will be able to choose which device you would like to push the compiled binary!

huxflux

@Theodore-Borromeo Yes it fixes the dependency so I'm able to compile it, but not link it. undefined reference to one or more of the functions.

Cloud Compile sounds fancy schmancy

Lazar Demin

@huxflux Does your linker command include the linking instructions from the wiki article?

Also, do you have the onion spi library installed?
Run:

opkg update
opkg install libonionspi

To install the library

huxflux

@Lazar-Demin Yes, this is what I execute gcc main.c -loniondebug -lonionspi
Here's the testfile for compiling http://pastebin.com/gj8QT1k1. I also have libonionspi.so and liboniondebug.so in /usr/lib/.

Lazar Demin

@huxflux What output do you get when you run that command?
Maybe try adding -L /usr/lib so it knows where to look for the dynamic libraries?

huxflux

@Lazar-Demin Check out post #4 in this thread. I'll try with -L /usr/lib

Btw, minor detail. When I include onion-spi.h, that file also includes onion-debug.h. Which is not found at https://github.com/OnionIoT/spi-gpio-driver/ but found at https://github.com/OnionIoT/i2c-exp-driver

huxflux

I now have onion-spi.h from https://github.com/OnionIoT/spi-gpio-driver/ and onion-debug.h from https://github.com/OnionIoT/i2c-exp-driver and moved them to /usr/include. I execute gcc main.c -L /usr/lib -loniondebug -lonionspi and get this errormessage: http://pastebin.com/2K3eX8x4

Basically the same as post #4

Theodore Borromeo

@huxflux said:

spiParamInit

That is defined in: https://github.com/OnionIoT/spi-gpio-driver/blob/853a4ab5010cd23847e3b0ff87ff6b1bd1447187/src/onion-spi.c

soooooo, try to maybe include that in your build as well? perhaps something like:

gcc main.c onion-spi.c -loniondebug -lonionspi

or whatever. . .

however, the more i think about it, those libs should be providing the definition for what the headers declare. so the linking to the libs as well as pointing to usr/lib for the headers should just work. It seems that perhaps the libs work for omega folks as they have the headers working. Maybe their packages didn't properly export the headers upon library installation with opkg, and it works for them coincidentally?

Theodore Borromeo

so in light of all this, you're probably better off compiling it all by hand into your app yourself, if linking to the built libs aren't working. Of course, I'm hopeful that it is as simple as that and you don't need yet other libs. . .