omega2+ flash omega2p-v0.1.10-b162.bin - break
-
I instal:
root@Omega-BDC5: cd /tmp root@Omega-BDC5: wget http://repo.onion.io/omega2/images/omega2p-v0.1.10-b162.bin --2017-03-03 17:58:40-- http://repo.onion.io/omega2/images/omega2p-v0.1.10-b162.bin Resolving repo.onion.io... 52.89.44.24, 54.149.140.66 Connecting to repo.onion.io|52.89.44.24|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 7078055 (6.8M) [application/octet-stream] Saving to: 'omega2p-v0.1.10-b162.bin' omega2p-v0.1.10-b16 100%[===================>] 6.75M 545KB/s in 11s 2017-03-03 17:58:52 (603 KB/s) - 'omega2p-v0.1.10-b162.bin' saved [7078055/7078055] root@Omega-BDC5: sysupgrade -n omega2p-v0.1.10-b162.bin killall: watchdog: no process killed Sending TERM to remaining processes ... avahi-daemon onion-helper udhcpc udhcpc dnsmasq mountd ntpd ubusd logd rpcd netifd odhcpd uhttpd device-client Sending KILL to remaining processes ... Switching to ramdisk... Performing system upgrade... [ 255.393637] done. [ 255.395646] jffs2: notice: (1768) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 255.411417] jffs2: fork failed for JFFS2 garbage collect thread: 4 Unlocking firmware ... Writing from <stdin> to firmware ... Upgrade completed Rebooting system... umount: can't unmount /dev: Resource busy umount: can't unmount /tmp: Resource busy [ 310.462873] reboot: Restarting system ____ _ ____ / __ \___ (_)__ ___ / __ \__ _ ___ ___ ____ _ / /_/ / _ \/ / _ \/ _ \ / /_/ / ' \/ -_) _ `/ _ `/ \____/_//_/_/\___/_//_/ \____/_/_/_/\__/\_, /\_,_/ W H A T W I L L Y O U I N V E N T ? /___/" Board: Onion Omega2 APSoC DRAM: 128 MB relocate_code Pointer at: 87f60000 ****************************** Software System Reset Occurred ****************************** flash manufacture id: c2, device id 20 19 find flash: MX25L25635E *** Warning - bad CRC, using default environment ============================================ Onion Omega2 UBoot Version: 4.3.0.3 -------------------------------------------- ASIC 7628_MP (Port5<->None) DRAM component: 1024 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 128 MBytes Flash component: SPI Flash Date:Oct 18 2016 Time:17:29:05 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 CPU freq = 575 MHZ Estimated memory size = 128 Mbytes Resetting MT7628 PHY. Initializing MT7688 GPIO system. ************************************** * Hold Reset button for more options * ************************************** Boot Linux from Flash NO RESET PRESSED. ## Booting image at bc050000 ... Image Name: MIPS LEDE Linux-4.4.46 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1340558 Bytes = 1.3 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 128 Starting kernel ... [ 0.000000] Linux version 4.4.46 (root@2272a3272872) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3273-a0888ec) ) #0 Thu Feb 2 23:46:03 2017 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) [ 0.000000] MIPS: machine is Onion Omega2+ [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00040000 [ 0.000000] Readback ErrCtl register=00040000 [ 0.000000] Memory: 125492K/131072K available (3100K kernel code, 147K rwdata, 740K rodata, 164K init, 196K bss, 5580K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] intc: using register map from devicetree [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource_probe: no matching clocksources found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.007520] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.070036] pid_max: default: 32768 minimum: 301 [ 0.074632] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080967] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.094473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.104111] pinctrl core: initialized pinctrl subsystem [ 0.109829] NET: Registered protocol family 16 [ 0.134587] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.140068] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.145570] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.152029] i2c-mt7621 10000900.i2c: clock 100KHz, re-start not support [ 0.159587] clocksource: Switched to clocksource MIPS [ 0.166080] NET: Registered protocol family 2 [ 0.171319] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.178012] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.184202] TCP: Hash tables configured (established 1024 bind 1024) [ 0.190398] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.196002] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.202359] NET: Registered protocol family 1 [ 0.212721] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.218682] Crashlog allocated RAM at address 0x3f00000 [ 0.240357] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.245947] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.258742] io scheduler noop registered [ 0.262541] io scheduler deadline registered (default) [ 0.268335] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm [ 0.277410] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22 [ 0.283418] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0 on device rt2880-pinmux [ 0.292822] mtk-pwm 10005000.pwm: Error applying setting, reverse things back [ 0.300188] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.307729] console [ttyS0] disabled [ 0.311219] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A [ 0.319939] console [ttyS0] enabled [ 0.319939] console [ttyS0] enabled [ 0.326936] bootconsole [early0] disabled [ 0.326936] bootconsole [early0] disabled [ 0.335599] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A [ 0.345110] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A [ 0.355706] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 0.366039] m25p80 spi32766.0: using chunked io (size=31) [ 0.371602] m25p80 spi32766.0: mx25l25635e (32768 Kbytes) [ 0.377108] 4 ofpart partitions found on MTD device spi32766.0 [ 0.383034] Creating 4 MTD partitions on "spi32766.0": [ 0.388250] 0x000000000000-0x000000030000 : "u-boot" [ 0.395117] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.402450] 0x000000040000-0x000000050000 : "factory" [ 0.409446] 0x000000050000-0x000002000000 : "firmware" [ 0.457274] 2 uimage-fw partitions found on MTD device firmware [ 0.463324] 0x000000050000-0x0000001974ce : "kernel" [ 0.470118] 0x0000001974ce-0x000002000000 : "rootfs" [ 0.476991] mtd: device 5 (rootfs) set to be root filesystem [ 0.482868] 1 squashfs-split partitions found on MTD device rootfs [ 0.489144] 0x0000006f0000-0x000002000000 : "rootfs_data" [ 0.506357] rt3050-esw 10110000.esw: link changed 0x00 [ 0.514143] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 0.522790] i2c /dev entries driver [ 0.526908] mt7621_wdt 10000120.watchdog: Initialized [ 0.533623] NET: Registered protocol family 10 [ 0.542388] NET: Registered protocol family 17 [ 0.546987] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.559850] 8021q: 802.1Q VLAN Support v1.8 [ 0.571254] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 0.579313] Freeing unused kernel memory: 164K (803e7000 - 80410000) [ 1.575699] init: Console is alive [ 1.579360] init: - watchdog - [ 4.019175] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.173030] usbcore: registered new interface driver usbfs [ 4.178702] usbcore: registered new interface driver hub [ 4.184274] usbcore: registered new device driver usb [ 4.195924] exFAT: Version 1.2.9 [ 4.237898] SCSI subsystem initialized [ 4.248723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.257145] ehci-platform: EHCI generic platform driver [ 4.272831] phy phy-10120000.usbphy.0: remote usb device wakeup disabled [ 4.279647] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz [ 4.284973] ehci-platform 101c0000.ehci: EHCI Host Controller [ 4.290846] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 4.298998] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 4.319626] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 4.327177] hub 1-0:1.0: USB hub found [ 4.331421] hub 1-0:1.0: 1 port detected [ 4.340479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.348418] ohci-platform: OHCI generic platform driver [ 4.354059] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 4.361028] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 4.369146] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 4.434791] hub 2-0:1.0: USB hub found [ 4.439056] hub 2-0:1.0: 1 port detected [ 4.456502] MTK MSDC device init. [ 4.499765] mtk-sd: MediaTek MT6575 MSDC Driver [ 4.507816] sdhci: Secure Digital Host Controller Interface driver [ 4.514165] sdhci: Copyright(c) Pierre Ossman [ 4.520100] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.530475] usbcore: registered new interface driver usb-storage [ 4.540388] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.558230] init: - preinit - [ 4.781260] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.081990] random: procd: uninitialized urandom read (4 bytes read, 9 bits of entropy available) [ 5.091750] usb-storage 1-1:1.0: USB Mass Storage device detected [ 5.106129] scsi host0: usb-storage 1-1:1.0 [ 5.437247] rt3050-esw 10110000.esw: link changed 0x00 Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 6.110599] scsi 0:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2 [ 6.121829] sd 0:0:0:0: [sda] 65536000 512-byte logical blocks: (33.6 GB/31.3 GiB) [ 6.130380] sd 0:0:0:0: [sda] Write Protect is off [ 6.135989] sd 0:0:0:0: [sda] No Caching mode page found [ 6.141454] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.202775] sda: [ 6.208502] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.702080] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 8.737548] urandom-seed: Seed file not found (/etc/urandom.seed) [ 8.905141] procd: - early - [ 8.908176] procd: - watchdog - [ 9.561640] procd: - ubus - [ 9.765942] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.775674] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.784902] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.794496] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.803702] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.813049] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.822393] random: ubusd: uninitialized urandom read (4 bytes read, 27 bits of entropy available) [ 9.831972] procd: - init - Please press Enter to activate this console. [ 10.473997] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.510331] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 10.580534] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.604958] Ralink/MTK WiFi EEPROM API Build for MT7620. [ 10.647818] WRTnode AP Driver version: 4.1.0.0 [ 10.724682] Linux video capture interface: v2.00 [ 10.949098] hidraw: raw HID events driver (C) Jiri Kosina [ 10.993987] Bluetooth: Core ver 2.21 [ 10.997734] NET: Registered protocol family 31 [ 11.002283] Bluetooth: HCI device and connection manager initialized [ 11.008738] Bluetooth: HCI socket layer initialized [ 11.013699] Bluetooth: L2CAP socket layer initialized [ 11.018870] Bluetooth: SCO socket layer initialized [ 11.026337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.031804] Bluetooth: BNEP filters: protocol multicast [ 11.037116] Bluetooth: BNEP socket layer initialized [ 11.048948] usbcore: registered new interface driver btusb [ 11.058551] usbcore: registered new interface driver cdc_acm [ 11.064381] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.093114] Bluetooth: HCI UART driver ver 2.3 [ 11.097635] Bluetooth: HCI UART protocol H4 registered [ 11.102909] Bluetooth: HCI UART protocol BCSP registered [ 11.112605] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 11.118634] Bluetooth: HIDP socket layer initialized [ 11.126871] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.148305] nf_conntrack version 0.5.0 (1963 buckets, 7852 max) [ 11.207489] Bluetooth: RFCOMM TTY layer initialized [ 11.212542] Bluetooth: RFCOMM socket layer initialized [ 11.217777] Bluetooth: RFCOMM ver 1.11 [ 11.229710] spidev spi32766.1: buggy DT: spidev listed directly in DT [ 11.236256] ------------[ cut here ]------------ [ 11.240988] WARNING: CPU: 0 PID: 502 at drivers/spi/spidev.c:720 0x876ae33c() [ 11.248217] Modules linked in: spidev(+) snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core ralink_gdma virt_dma mt76x8 ralink_eeprom_api ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 aead crypto_null cryptomgr crc32c_generic crypto_hash [ 11.357744] CPU: 0 PID: 502 Comm: kmodloader Not tainted 4.4.46 #0 [ 11.364018] Stack : 803806c0 00000000 00000001 803d0000 87daafcc 803cae63 80361b48 000001f6 80413438 0000000e 0000001a 024000c0 800662c8 8004aee8 80367044 803c0000 00000003 0000000e 80365448 87547b4c 800662c8 80048e54 00000000 00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ... [ 11.400177] Call Trace: [ 11.402715] [<800662c8>] module_sect_show+0x0/0x18 [ 11.407581] [<8004aee8>] vprintk_default+0x24/0x30 [ 11.412471] [<800662c8>] module_sect_show+0x0/0x18 [ 11.417330] [<80048e54>] printk+0x2c/0x38 [ 11.421434] [<800254d8>] warn_slowpath_common+0xa0/0xd0 [ 11.426750] [<8014da98>] dump_stack+0x14/0x28 [ 11.431180] [<8001491c>] show_stack+0x50/0x84 [ 11.435598] [<800254d8>] warn_slowpath_common+0xa0/0xd0 [ 11.440915] [<876ae33c>] 0x876ae33c [ 11.444472] [<80025590>] warn_slowpath_null+0x18/0x24 [ 11.449626] [<801faf78>] of_match_node+0x20/0x44 [ 11.454332] [<876ae33c>] 0x876ae33c [ 11.457892] [<801c06d8>] devm_kfree+0x20/0x44 [ 11.462341] [<801e191c>] spi_drv_probe+0x3c/0x84 [ 11.467034] [<801bd208>] driver_probe_device+0x120/0x288 [ 11.472454] [<8008b824>] kstrdup+0x44/0x8c [ 11.476626] [<801e181c>] spi_match_device+0x38/0xa8 [ 11.481608] [<801bd3ec>] __driver_attach+0x7c/0xb4 [ 11.486467] [<801bb610>] next_device+0x10/0x30 [ 11.490990] [<801bd370>] __driver_attach+0x0/0xb4 [ 11.495761] [<801bb6cc>] bus_for_each_dev+0x9c/0xac [ 11.500752] [<80303404>] klist_add_tail+0x24/0x50 [ 11.505531] [<801bb4a0>] bus_get+0x2c/0x50 [ 11.509720] [<801bc900>] bus_add_driver+0xec/0x20c [ 11.514588] [<800ae880>] exact_match+0x0/0x8 [ 11.518920] [<800aed88>] exact_lock+0x0/0x24 [ 11.523283] [<801bdb04>] driver_register+0xa8/0xf8 [ 11.528146] [<877cd000>] init_module+0x0/0xdc [spidev] [ 11.533405] [<877cd098>] init_module+0x98/0xdc [spidev] [ 11.538715] [<80159668>] kasprintf+0x1c/0x28 [ 11.543076] [<800a7248>] ___slab_alloc.isra.12.constprop.18+0x104/0x240 [ 11.549794] [<877cd000>] init_module+0x0/0xdc [spidev] [ 11.555027] [<8000d938>] do_one_initcall+0x1e8/0x214 [ 11.560090] [<877cd000>] init_module+0x0/0xdc [spidev] [ 11.565313] [<800a75b8>] kmem_cache_alloc+0x40/0xfc [ 11.570301] [<80033fe8>] call_usermodehelper_setup+0x38/0xa8 [ 11.576064] [<800a73a4>] __slab_alloc.isra.13.constprop.17+0x20/0x44 [ 11.582536] [<800662c8>] module_sect_show+0x0/0x18 [ 11.587421] [<800674e8>] do_init_module+0x74/0x1cc [ 11.592304] [<8009f36c>] __vunmap+0xf0/0x114 [ 11.596671] [<80068d7c>] load_module+0x16c0/0x1b68 [ 11.601550] [<800668b4>] unknown_module_param_cb+0x0/0xac [ 11.607031] [<8009f860>] __vmalloc_node+0x34/0x40 [ 11.611836] [<800692b8>] SyS_init_module+0x94/0x180 [ 11.616787] [<80069354>] SyS_init_module+0x130/0x180 [ 11.621866] [<8000682c>] syscall_common+0x30/0x54 [ 11.626649] [<80008c58>] __bzero+0xbc/0x164 [ 11.630897] [ 11.632408] ---[ end trace 4b71434bc750a4ca ]--- [ 11.644596] usbcore: registered new interface driver ums-alauda [ 11.653820] usbcore: registered new interface driver ums-cypress [ 11.663062] usbcore: registered new interface driver ums-datafab [ 11.672031] usbcore: registered new interface driver ums-freecom [ 11.681218] usbcore: registered new interface driver ums-isd200 [ 11.690458] usbcore: registered new interface driver ums-jumpshot [ 11.699497] usbcore: registered new interface driver ums-karma [ 11.709251] usbcore: registered new interface driver ums-sddr09 [ 11.718424] usbcore: registered new interface driver ums-sddr55 [ 11.727955] usbcore: registered new interface driver ums-usbat [ 11.740361] usbcore: registered new interface driver usbhid [ 11.746023] usbhid: USB HID core driver [ 11.753764] usbcore: registered new interface driver usblp [ 11.767911] usbcore: registered new interface driver usbserial [ 11.774055] usbcore: registered new interface driver usbserial_generic [ 11.780812] usbserial: USB Serial support registered for generic [ 11.799788] Driver for 1-wire Dallas network protocol. [ 11.826737] xt_time: kernel timezone is -0000 [ 11.833510] usbcore: registered new interface driver ch341 [ 11.839191] usbserial: USB Serial support registered for ch341-uart [ 11.848080] usbcore: registered new interface driver cp210x [ 11.853948] usbserial: USB Serial support registered for cp210x [ 11.863577] usbcore: registered new interface driver ftdi_sio [ 11.869537] usbserial: USB Serial support registered for FTDI USB Serial Device [ 11.888514] usbcore: registered new interface driver pl2303 [ 11.894368] usbserial: USB Serial support registered for pl2303 [ 11.905899] PPP generic driver version 2.4.2 [ 11.913632] NET: Registered protocol family 24 [ 11.931835] usbcore: registered new interface driver snd-usb-audio [ 11.954004] usbcore: registered new interface driver uvcvideo [ 11.959899] USB Video Class driver (1.1.1) [ 11.970874] usbcore: registered new interface driver option [ 11.976642] usbserial: USB Serial support registered for GSM modem (1-port) [ 11.989374] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.233959] random: jshn: uninitialized urandom read (4 bytes read, 31 bits of entropy available) [ 12.398835] random: jshn: uninitialized urandom read (4 bytes read, 31 bits of entropy available) [ 24.369854] Kernel bug detected[#1]: [ 24.373508] CPU: 0 PID: 1163 Comm: ifconfig Tainted: G W 4.4.46 #0 [ 24.380923] task: 87c2e338 ti: 87286000 task.ti: 87286000 [ 24.386392] $ 0 : 00000000 00000001 00000001 0000ff00 [ 24.391712] $ 4 : 8734216c 00000000 00000000 00000001 [ 24.397023] $ 8 : 00000001 873421ac 00000000 353d7974 [ 24.402335] $12 : ffffffdf 00000058 00000000 00000041 [ 24.407646] $16 : 810e6840 0000016c 80430000 c045c7dc [ 24.412957] $20 : 87226480 c0457000 87276600 00000001 [ 24.418266] $24 : 00000000 80020694 [ 24.423576] $28 : 87286000 87287af8 00000001 870680a0 [ 24.428892] Hi : 00000000 [ 24.431809] Lo : 00000000 [ 24.434760] epc : 800206a0 r4k_dma_cache_wback_inv+0xc/0xc8 [ 24.440937] ra : 870680a0 linux_pci_map_single+0x88/0xb4 [mt76x8] [ 24.447378] Status: 1100e402 KERNEL EXL [ 24.451366] Cause : 10800034 (ExcCode 0d) [ 24.455430] PrId : 00019655 (MIPS 24KEc) [ 24.459489] Modules linked in: pppoe ppp_async option w1_therm w1_gpio uvcvideo usb_wwan snd_usb_audio pppox ppp_generic pl2303 nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio cp210x ch341 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG wire videobuf2_v4l2 usbserial usblp usbhid ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda uinput spidev snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core ralink_gdma virt_dma mt76x8 ralink_eeprom_api ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 aead crypto_null cryptomgr crc32c_generic crypto_hash [ 24.609573] Process ifconfig (pid: 1163, threadinfo=87286000, task=87c2e338, tls=77f6fd48) [ 24.617945] Stack : 87fe3000 87287bcc 00000000 00000000 0000006b 870680a0 87fe360a 87fe0000 87fe361a 0000a014 a7684000 c0457000 c0530f54 8703a56c ffffffdf 00000058 00000000 00000041 0000ff00 000001db 00000010 00000001 8734216c 00000000 00000001 00000001 00000000 8734216c 87fe3000 87226480 00000000 c0457000 87226480 c0530f50 c0537000 c0530f6c c0530f7c 87039884 00000000 87062934 ... [ 24.654070] Call Trace: [ 24.656570] [<800206a0>] r4k_dma_cache_wback_inv+0xc/0xc8 [ 24.662357] [<870680a0>] linux_pci_map_single+0x88/0xb4 [mt76x8] [ 24.669070] [<8703a56c>] AndesMTPciKickOutCmdMsg+0x104/0x238 [mt76x8] [ 24.676223] [<87039884>] AndesSendCmdMsg+0x1b4/0xd98 [mt76x8] [ 24.682672] [<87039cc4>] AndesSendCmdMsg+0x5f4/0xd98 [mt76x8] [ 24.688802] [ 24.690311] Code: 27bdffe8 2ca20001 afbf0014 <00020336> 3c02803c 24426060 8c430008 7c630440 10600013 [ 24.700489] ---[ end trace 4b71434bc750a4cb ]--- [ 24.708621] Fatal exception: panic in 5 seconds [ 25.599726] Kernel bug detected[#2]: [ 25.603561] CPU: 0 PID: 1164 Comm: RtmpCmdQTask Tainted: G D W 4.4.46 #0 [ 25.611328] task: 87c2e840 ti: 8727a000 task.ti: 8727a000 [ 25.616797] $ 0 : 00000000 80410000 00000001 0000ff00 [ 25.622113] $ 4 : 8734204c 00000000 00000000 00000001 [ 25.627422] $ 8 : 00000001 87342088 00000000 00000000 [ 25.632734] $12 : 00000000 c04587ac 00000000 00000000 [ 25.638046] $16 : 810e6840 0000004c 80430000 c045c7dc [ 25.643360] $20 : 87f64880 c0457000 872766c0 00000001 [ 25.648671] $24 : 00000000 80020694 [ 25.653983] $28 : 8727a000 8727bce8 00000000 870680a0 [ 25.659295] Hi : 00000000 [ 25.662213] Lo : 00000000 [ 25.665161] epc : 800206a0 r4k_dma_cache_wback_inv+0xc/0xc8 [ 25.671321] ra : 870680a0 linux_pci_map_single+0x88/0xb4 [mt76x8] [ 25.677762] Status: 1100e402 KERNEL EXL [ 25.681749] Cause : 10800034 (ExcCode 0d) [ 25.685813] PrId : 00019655 (MIPS 24KEc) [ 25.689873] Modules linked in: pppoe ppp_async option w1_therm w1_gpio uvcvideo usb_wwan snd_usb_audio pppox ppp_generic pl2303 nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio cp210x ch341 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG wire videobuf2_v4l2 usbserial usblp usbhid ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda uinput spidev snd_usbmidi_lib slhc rfcomm nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hidp hid_generic hci_uart crc_ccitt cdc_acm btusb btintel bnep bluetooth snd_soc_simple_card snd_soc_ralink_i2s snd_soc_wm8960 videobuf2_vmalloc videobuf2_memops videobuf2_core hid v4l2_common videodev evdev snd_soc_core ralink_gdma virt_dma mt76x8 ralink_eeprom_api ledtrig_oneshot ledtrig_morse ledtrig_heartbeat ledtrig_gpio ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs configfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 regmap_i2c dma_shared_buffer ecb cmac mmc_block usb_storage sdhci_pltfm sdhci mtk_sd mmc_core leds_gpio ohci_platform ohci_hcd ledtrig_transient ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common crc16 aead crypto_null cryptomgr crc32c_generic crypto_hash [ 25.839957] Process RtmpCmdQTask (pid: 1164, threadinfo=8727a000, task=87c2e840, tls=00000000) [ 25.848680] Stack : 02020200 31313538 87ccd420 00000000 024004c0 870680a0 87298180 00200020 8727bdb8 8727bddc a7684000 c0457000 c0530f54 8703a56c 0000000d 00200020 80380000 803caa00 0000ff00 803ca4c0 00000001 00000001 8734204c 00000000 00000001 00000001 00000000 8734204c 803c8fa0 87f64880 00000000 c0457000 87f64880 c0530f50 c0537000 c0530f6c c0530f7c 87039884 00000000 87062934 ... [ 25.884811] Call Trace: [ 25.887312] [<800206a0>] r4k_dma_cache_wback_inv+0xc/0xc8 [ 25.893099] [<870680a0>] linux_pci_map_single+0x88/0xb4 [mt76x8] [ 25.899813] [<8703a56c>] AndesMTPciKickOutCmdMsg+0x104/0x238 [mt76x8] [ 25.906968] [<87039884>] AndesSendCmdMsg+0x1b4/0xd98 [mt76x8] [ 25.913417] [<8703d588>] CmdSlotTimeSet+0xb4/0x1c4 [mt76x8] [ 25.919691] [<87041014>] MtAsicSetSlotTime+0x20/0x2c [mt76x8] [ 25.926139] [<8702a6d0>] CMDHandler+0x1b4/0x224 [mt76x8] [ 25.932145] [<87066bc4>] RTPCICmdThread+0xb4/0x198 [mt76x8] [ 25.938110] [<8003bf48>] kthread+0xd8/0xec [ 25.942271] [<80004478>] ret_from_kernel_thread+0x14/0x1c [ 25.947739] [ 25.949247] Code: 27bdffe8 2ca20001 afbf0014 <00020336> 3c02803c 24426060 8c430008 7c630440 10600013 [ 25.959427] ---[ end trace 4b71434bc750a4cc ]--- [ 25.966658] Fatal exception: panic in 5 seconds [ 29.719602] Kernel panic - not syncing: Fatal exception [ 29.727641] Rebooting in 3 seconds..
-
I can verify that b162 is not working. I had a good booting process with b160 and have been installing the updates manually ever since I got the Omega2 (Not the +) and this b162 is broken. get the same Fatal exception: panic in 5 seconds too. In keeps rebooting over and over....
How can I restore the b160 back ?
Never got to a bad firmware before.
-
-
download firmware
-
Rename the file to Omega2.bin (for the Omega 2+ anyway)
-
Copy omega2.bin to usb storage (FAT32)
-
Connect PC to Omega 2 via device supporting USB to serial connectivity
-
Hold the reset button down and power on the omega
-
Select option #2, install firmware from USB.
-
-
Thanks!!! Working again. Will wait until they fix the latest firmware now.
-
I'm really new in this. Just got the omega2+, updated to the latest firmware and it stopped working. How can I get the serial console running with Power Dock?
This is so disappointing. How could they release a firmware that makes the hardware unusable. I want my money back!!
-
Starting from 1$ you can buy one of these USB to serial CP2102 adapters, always comes in handy having one in the drawer.
Anyway, without any way to use a keyboard with the omega, I don't see any solution. See this.
Also, every firmware upgrade has its risks. Even on production routers where OpenWRT is mostly used, you can end with an ugly paperweight. Every solution for this uses in some point a serial to USB adapter, even having to weld some pins.
Also try this to reset the omega2. Even try to add the firmware file named
omega2p.binin a FAT32 pendrive and connect to the omega2 while pressing the reset button. It needs a serial connection to choose option2from uboot, but trying is better than nothing.
-
Thanks for replying!
Mine is dead too...
This is really bad!!To the "onion people" read the forums!? That firmware should have been pulled!
Ny hardware is now unusable until I find a usb to serial adapter of some sorts...
:PISSED OFF:
-
I can confirm that b162 is not working and had to connect thru serial to fix it. Also Console-Base has been updated to 0.3.1 and there is no Terminal or Editor working.
-
b163 is not working either. Keeps wanting to reboot.
-
@Paul-Kourany it's always useful to post the kernel panic log to help debugging. If you have serial connection, open an issue with all the info you can.
-
FWIW, I tried b163 and also get constant reboot.
Attached is the serial output from the manual firmware upgrade process and subsequent restart as requested.
0_1489031869386_Omega2p_b163_maunal_install_COM3_20170309_145254.txt
-
I recently bricked my Omega2+ flashing the same firmware as well. Sigh. Gotta wait like a month for the CP2102 adapter to arrive then, I guess. I hope there's a working firmware by then
-
Also came back after a few weeks and bricked mine. Wish I'd read the forums first
I guess I'd hoped the issues with the Omega2+ would be over and done with after ~4 months of grappling with it. I clearly guessed wrong =/I figured "fine, I'll recover it back to an old firmware." Or maybe not. I have an "EXP DOCK" with pinout silk for the original Omega, but noticed the USB pins are the same. But for love nor money I can't get the Omega2+ to see any USB mass storage device. I've tried 5-6 separate devices now from microSD cards in readers, to USB thumb drives, but... nada.
Just attempt after attempt resulting in:
Scanning bus for storage devices... ================================================= 1: Hub, USB Revision 0.2 - u-boot EHCI Host Controller - Class: Hub - PacketSize: 64 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 0.1 USB_STORAGE: 0 Storage Device(s) found No USB Storage found. No F/W upgrade from USB Storage will be attempted.
-
just received 2 omega2+, both wont boot.
all with same kernel panic:
[ 31.208771] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 8771d944tried upgrading to b159, not working: kernel panic.
upgrading to b160. not working: kernel panic.
upgrading to b162, not working: kernel panic.
upgrading to b163, not working: kernel panic.
-
@Chris-H got a solution?
-
@Tiago-Couto said in omega2+ flash omega2p-v0.1.10-b162.bin - break:
just received 2 omega2+, both wont boot.
all with same kernel panic:
[ 31.208771] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 8771d944tried upgrading to b159, not working: kernel panic.
upgrading to b160. not working: kernel panic.
upgrading to b162, not working: kernel panic.
upgrading to b163, not working: kernel panic.Most likely you did not successfully load b159, or at least not the correct version for your board.
-
@Chris-Stratton im pretty sure it loaded right...
http://repo.onion.io/omega2/images/omega2p-v0.1.9-b157.bin
here is the log (now trying with b157): 0_1490201328023_screenlog.0
-
@Tiago-Couto I looked over your log file. Your kernel panic is happening ~31 seconds, just as the Wifi is turning on - this is at the time of the Omega's highest power load. How are you powering the Omega2+, ie what is your power source and how is the Omega2+ wired to the source?
