Board Layout

[bloudraak]

Hello,

I have a few Omega2 Pro SBCs (along with numerous other ARM, RISC-V, and x86 SBCs). It's on a 1U shelf in the server cabinet. It's a bit of a mess since ethernet and USB cables move the SBCs around.

I got some polycarbonate sheets, laid them out, and mounted them. Add some support for cable management, and things look a bit more reasonable. At least the boards stay put and don't move.

I'd like to do the same with my Omega2 boards. Is there a layout of the Omega2 Pro SBC board, along with Omega2 LTE and Omega2 Dash with measurements, including the size of the mounting holes, and how they are apart and from the edges, etc that I can use? This will reduce any errors that may result from manually measuring the boards. If the question doesn't make sense, assume I want to build a case for each of the boards and need to know how to mount them.

Thanks,
Werner

[crispyoz]

@bloudraak Take a look in https://github.com/OnionIoT/technical-drawings/tree/master/Mechanical

[Lazar Demin]

@bloudraak There's also dxf files available for the Pro, LTE, and Dash with super precise measurements:

• https://github.com/OnionIoT/Omega2-Pro/blob/master/Hardware/R1.2/Omega2-Pro.dxf
• https://github.com/OnionIoT/Omega2-LTE/blob/master/Hardware/R1.1/Omega2-LTE.dxf
• https://github.com/OnionIoT/Omega2-Dash/blob/master/Hardware/R1.0/Omega2-Dash.dxf