We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Reset Button not working on Minidock



  • Tried pressing the reset button with my hand, with some tool, but from the console i'm still getting "Boot Linux from Flash NO RESET PRESSED."

    i read that GPIO38 is responsible for reset, what can i do with the GPIO38 when the Omega2+ is plugged into a minidock ?
    any workaround so i can make the reset to work on the minidock ?

    my device is bricked and I need to press reset so i'm able to flash from USB.

    any help would be very much appreciated.

    thanks !



  • i also tried touching the RST and FW RST pin (GPIO38) with a pin and turn on the Omega2+
    while touching the RST pin, the device will be on a restart loop where it keep restarting.
    while touching the FW RST pin (GPIO38) nothing happens



  • FW_Reset is read by the firmware as it really is a software based reading GPIO38.
    Use a multimeter to probe that pin. When "RESET" button is pressed, it should read 2.1V (logic "H") approx.

    ccs_hello



  • @ccs-hello
    what i'm trying to achieve here is to make the Omega2+ knows that i'm pressing the reset button while i start it up
    for my purpose is to flash the device since it's currently bricked

    can i do that with touching the RST pin with a needle ?
    if not, what do i need to do ?



  • @dennis-ctp said in Reset Button not working on Minidock:

    @ccs-hello
    what i'm trying to achieve here is to make the Omega2+ knows that i'm pressing the reset button while i start it up
    for my purpose is to flash the device since it's currently bricked

    can i do that with touching the RST pin with a needle ?
    if not, what do i need to do ?

    You use the FW-RST-pin for that, not the CPU-RST-pin. Simply connect FW-RST to 3.3V to "press the reset-button", so to speak.



  • Yep, mini-dock's "RESET" button connects to Omega2's FW_RESET pin.
    Omega2's RST pin should left open/untouched at all times.

    ccs_hello



  • hi, just to be safe
    so basically i just need to use a wire and connect the vout pin and fw_rst pin right ?



  • @dennis-ctp
    i just did that but seems same
    guess i'll have to setup something similar to this guide https://docs.onion.io/omega2-docs/hardware-prep-no-dock.html
    and instead of power to the vin, put it to the fw_reset right ?



  • @dennis-ctp said in Reset Button not working on Minidock:

    @dennis-ctp
    i just did that but seems same
    guess i'll have to setup something similar to this guide https://docs.onion.io/omega2-docs/hardware-prep-no-dock.html
    and instead of power to the vin, put it to the fw_reset right ?

    No, it needs to go to both. FW_RESET is just a GPIO-pin, it is not a power-supply pin.



  • @WereCatf
    ya but i'm still powering the omega2p with the minidock.



  • ok i got the below by connecting vin with fw_rst
    it seems like i got the reset pressed, but it doesn't wait for me to input anything ...
    then it restart and keep repeating
    any idea?

    **************************************
    * Hold Reset button for more options *
    **************************************
    
    
    You have 40 seconds left to select a menu option...
    
    
    Please select option:
       [ Enter ]: Boot Omega2.
       [ 0 ]: Start Web recovery mode.
       [ 1 ]: Start command line mode.
       [ 2 ]: Flash firmware from USB storage.
    
    Option [
    Boot Linux from Flash.
    ## Booting image at bc050000 ...
       Image Name:   MIPS LEDE Linux-4.4.42
       Image Type:   MIPS Linux Kernel Image (lzma compressed)
       Data Size:    1306381 Bytes =  1.2 MB
       Load Address: 80000000
       Entry Point:  80000000
       Verifying Checksum ... Bad Data CRC
    
       ____       _             ____
      / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
     / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
     \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
     W H A T  W I L L  Y O U  I N V E N T ? /___/"
    
    Board: Onion Omega2 APSoC DRAM:  128 MB
    relocate_code Pointer at: 87f60000
    ******************************
    Software System Reset Occurred
    ******************************
    flash manufacture id: c2, device id 20 19
    find flash: MX25L25635E
    *** Warning - bad CRC, using default environment```


  • @dennis-ctp Something on your computer's end is sending something to the Omega2 and it interprets it as a keypress.



  • or could it be like another person reported in another thread, that the mini dock's is not receiving anything and thus automatically skipped the input ?

    https://community.onion.io/topic/1154/omega-2-usb-firmware-install-after-brick-resolved/34

    i've tested connecting to a second working omega2+ and the serial/computer connection isn't sending anything at all.



  • @dennis-ctp said in Reset Button not working on Minidock:

    or could it be like another person reported in another thread, that the mini dock's is not receiving anything and thus automatically skipped the input ?

    If it wasn't receiving any input it'd wait for 40 seconds before continuing.



  • @WereCatf
    i think its the problem of this particular omega2+

    Case 1. When i connect the VIN pin and FW RST pin, it kept restarting and the LED blinks slowly (roughly 1-2s)

    Case 2. I got another power dock, when i plug this bricked omega2+ to the power dock and turn on while pressing reset button, the LED keeps blinking slowly (roughly 1-2s, the interval is similar to when connecting VIN pin and FW RST pin)

    it seems like in both case, the omega2+ is in a restarting loop.
    the power dock does not have any serial chip, so i'm sure that there shouldn't be any input provide to the omega2+

    any idea how can i unbrick my omega2+ ?
    i only owns a minidock and a power dock.

    (actually i don't understand how i bricked it in the first place, i was just running the initial setup and i did waited until the update complete. it was bricked after the reboot after completing the update)



  • My reset button on my mini dock does not work either. I submitted a ticket with Onion's help desk over a week ago with photos and a video and haven't heard anything back yet. One of the reasons I had ordered the mini dock was to be able to easily unbrick a unit and with the reset button not functioning that functionality is gone.



  • It seems like you should be able to determine if there is a hardware fault in the dock reset circuit by measuring the appropriate pin with a voltmeter, powering the dock with no omega installed, or potentially exploring the dock board with an ohm-meter when it is unpowered and has no omega installed.

    Similarly, one the boards with USB-serial, you could test them by removing the omega and installing a small piece of fine wire between the two serial holes of the omega socket; with the wire a serial terminal program should see echo of typed characters, without it, it should not (unless it locally generating an echo, in which case with the wire you will see two of every character typed, and without only one).

    The point would be to differentiate between possibilities:

    • Something wrong with the computer serial setup
    • Something wrong with the dock (bad button or connections)
    • Something wrong electrically with the omega2 (missing or shorted connection, etc)
    • Something wrong with the omega2 flash state, like a corrupted U-Boot, kernel, or filesystem

    Of course insufficient power supply is another thing to suspect.



  • I also have an arduino 2 dock. Both of my Omega2+ units respond to the reset button on that one, neither do on the mini dock. I can bring up the terminal on both units via serial connection when connected to my computer via the mini usb port on the mini dock. I have a 2.4a Anker charger that I've plugged the mini dock into and the reset button doesn't work with either omega2+ unit I have. The reset button on the mini dock simply doesn't work.



  • alright, i just plugged in the working omega2+ to the minidock to check.
    it seems like the minidock is somehow generating some weird repeating "@^" characters
    when i logged in via ssh concurrently, the omega2+ seems to be working fine

    weird part is i don't get any of those repeating "@^" characters when i use the bricked omega2+

    i also tried putting a wire connecting serial RX0 to TX0
    nothing shows in the console when i try to type
    then i tried RX1 to TX1, same result
    (although i believe for the minidock, the chip is connected to RX0 & TX0)

    below is what i get when power on the device (connected a working omega2+ on minidock, serial, using 115200)

       ____       _             ____
      / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
     / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
     \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
     W H A T  W I L L  Y O U  I N V E N T ? /___/"
    
    Board: Onion Omega2 APSoC DRAM:  128 MB
    relocate_code Pointer at: 87f60000
    flash manufacture id: c2, device id 20 19
    find flash: MX25L25635E
    *** Warning - bad CRC, using default environment
    
    ============================================
    Onion Omega2 UBoot Version: 4.3.0.3
    --------------------------------------------
    ASIC 7628_MP (Port5<->None)
    DRAM component: 1024 Mbits DDR, width 16
    DRAM bus: 16 bit
    Total memory: 128 MBytes
    Flash component: SPI Flash
    Date:Oct 18 2016  Time:17:29:05
    ============================================
    icache: sets:512, ways:4, linesz:32 ,total:65536
    dcache: sets:256, ways:4, linesz:32 ,total:32768
    CPU freq = 575 MHZ
    Estimated memory size = 128 Mbytes
    Resetting MT7628 PHY.
    Initializing MT7688 GPIO system.
    
    
    **************************************
    * Hold Reset button for more options *
    **************************************
    
    
    
    Boot Linux from Flash NO RESET PRESSED.
    ## Booting image at bc050000 ...
       Image Name:   MIPS LEDE Linux-4.4.42
       Image Type:   MIPS Linux Kernel Image (lzma compressed)
       Data Size:    1306381 Bytes =  1.2 MB
       Load Address: 80000000
       Entry Point:  80000000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ... OK
    No initrd
    ## Transferring control to Linux (at address 80000000) ...
    ## Giving linux memsize in MB, 128
    
    Starting kernel ...
    
    [    0.000000] Linux version 4.4.42 (root@2272a3272872) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3009-968fa53) ) #0 Mon Jan 16 19:40:14 2017
    [    0.000000] Board has DDR2
    [    0.000000] Analog PMU set to hw control
    [    0.000000] Digital PMU set to hw control
    [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
    [    0.000000] MIPS: machine is Onion Omega2+
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 08000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
    [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
    [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
    [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Writing ErrCtl register=000575ef
    [    0.000000] Readback ErrCtl register=000575ef
    [    0.000000] Memory: 125552K/131072K available (3012K kernel code, 143K rwdata, 724K rodata, 208K init, 196K bss, 5520K reserved, 0K cma-reserved)
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:256
    [    0.000000] intc: using register map from devicetree
    [    0.000000] CPU Clock: 580MHz
    [    0.000000] clocksource_probe: no matching clocksources found
    [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
    [    0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
    [    0.007522] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
    [    0.070038] pid_max: default: 32768 minimum: 301
    [    0.074639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.080978] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.094334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.103980] pinctrl core: initialized pinctrl subsystem
    [    0.109719] NET: Registered protocol family 16
    [    0.133428] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.138966] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.144400] mt7621_gpio 10000600.gpio: registering 32 gpios
    [    0.150915] i2c-mt7621 10000900.i2c: clock 100KHz, re-start not support
    [    0.158443] clocksource: Switched to clocksource MIPS
    [    0.164815] NET: Registered protocol family 2
    [    0.169921] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.176613] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.182796] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.189000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.194603] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.200945] NET: Registered protocol family 1
    [    0.210689] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.216639] Crashlog allocated RAM at address 0x3f00000
    [    0.237024] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.242677] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.254844] io scheduler noop registered
    [    0.258644] io scheduler deadline registered (default)
    [    0.264408] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
    [    0.273489] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
    [    0.279501] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
    [    0.288903] mtk-pwm 10005000.pwm: Error applying setting, reverse things back
    [    0.296246] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.303810] console [ttyS0] disabled
    [    0.307243] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
    [    0.316025] console [ttyS0] enabled
    [    0.316025] console [ttyS0] enabled
    [    0.323019] bootconsole [early0] disabled
    [    0.323019] bootconsole [early0] disabled
    [    0.331702] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
    [    0.341198] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
    [    0.351776] spi-mt7621 10000b00.spi: sys_freq: 193333333
    [    0.361855] m25p80 spi32766.0: using chunked io (size=31)
    [    0.367351] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.372919] 4 ofpart partitions found on MTD device spi32766.0
    [    0.378847] Creating 4 MTD partitions on "spi32766.0":
    [    0.384065] 0x000000000000-0x000000030000 : "u-boot"
    [    0.390884] 0x000000030000-0x000000040000 : "u-boot-env"
    [    0.398114] 0x000000040000-0x000000050000 : "factory"
    [    0.405158] 0x000000050000-0x000002000000 : "firmware"
    [    0.452889] 2 uimage-fw partitions found on MTD device firmware
    [    0.458938] 0x000000050000-0x00000018ef4d : "kernel"
    [    0.465621] 0x00000018ef4d-0x000002000000 : "rootfs"
    [    0.472575] mtd: device 5 (rootfs) set to be root filesystem
    [    0.478387] 1 squashfs-split partitions found on MTD device rootfs
    [    0.484728] 0x0000006e0000-0x000002000000 : "rootfs_data"
    [    0.501956] rt3050-esw 10110000.esw: link changed 0x00
    [    0.509704] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
    [    0.518303] i2c /dev entries driver
    [    0.522502] mt7621_wdt 10000120.watchdog: Initialized
    [    0.529238] NET: Registered protocol family 10
    [    0.537734] NET: Registered protocol family 17
    [    0.542412] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    0.555228] 8021q: 802.1Q VLAN Support v1.8
    ^@^@^@^@^@▒^@^@^@[    0.567037] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
    [    0.575408] Freeing unused kernel memory: 208K (803cc000 - 80400000)
    ^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@▒^@^@^@^H^H^@^@^@^H^@^@^@^@^@^@^@^@^@^@^A^@^A ^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^B^@^@^@^@^@^B^@^@^@^@^@^H^@^@^@^@^@^@^@▒^@^@^@^@^@^H^@^H(^@^H^@^@^@^@^H^@ ^@^@^H^@^@^@ ^P^@^@^H^@^@^@ ^@(^H^@^H^@^@^@^@^@^@ ^A^B^@@^B^@^@ ^@^@^@^@^H^@ ^H^@ ^H^@(^@^@ ^@^H^@^@@^@^H^@^@ ^@^H^@^@^@^H^@^H^@^@^@ ^@^H^@^@^H^@^H^@^H^@^@^@^@^@ ^@ ^@^@@^@^H^@^H^@ ^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@@^@^P^@^@ ^@^@^@^@^@@^@^@^@^@^@^@^@^A@^@^@^@^@^@^A^@^@^@^@^@^@^@ ^@^@^A▒@^@^A^P^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^H^@^@^@^@^@ ^@%^@^H^A^@^B^@^@^@▒^@ ^@^@^@^@▒^@^@^@^@ ^@^@^@^@^^@^@ ^@^@^@^@ ^@^@^@^@^@^@^@^H^@^@^@^@^@^@ ^H^H^@^@^@^@^@^@^@ ^@^@^@^A^@^H^@^B^@^@^@^@^@^@^@^@^@^@^@^@^C^A @^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    1.614352] init: Console is alive
    [    1.618131] init: - watchdog -
    ^@^@▒^@^@^H▒^P^@^@^P^@^@^@^@^@^@^@B^@^@^@^@^@^@^@^@^@^@^@^@B^H^B^@@^@^@^H^@^P^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@( ^@^@(^@^@^@ ^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^H^B^@^H▒@^@^@^@^H^H^@^@  ^@^@^@^@^@^@^@@^@^@^H^H^@^@^@^H^@^@^@^@^@^@^@^@^@^H@^@^@ ^@ ^@@^H^@^A^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^A^@^@^A^H^@^@^@^@^@^@^@^A^@^A^@^A^A^@^@^A@^@^@^@^@@^H^@^@(▒@^@^@(^B^@^@^H^@^@^@^@^@^@^@^@^@^@^@ ^@ @^P^H^@^@^@^H^@^@^@^@^@^H^@^@^@^P^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@    ^@^@^@^@^@@^@^@^@^@^@^A^@^A^@^@^@^A^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^A@^@^@^@^P@^@^A^@^H@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@  ^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@@^@^A^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@▒^@^A^@^@^@^@^@^A^@^@^@^A^@^@^A^@^@^@^H^@^@^@^@^@^@^@^@^@^@^P^@^@^@^@^@^@^@ @^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@▒^B▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^A^@^@^@ ^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@@^B^@^@^@^@^@^@^@^@^@^@^@▒^@^@^@^@^@^@^@▒^@^@^@^@^@^@^@^P^A^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@ ^H^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^A^@^@^A^@^B^@^@^A@^P^@^A@^A^B^A▒^@^@^@^@^@^@^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^H^B^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^H^@^@^A^@^A^H^@^A^@^A^@^@^@^@^@^@^@▒^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@A^@^@^@^@^@ ^@^@^@^@^@^@^@^@^A^@^A^@^@^@^@@^@^A^@@^@^A^@^@^@^@^@^@^A^@^@^@^@^@@^@^@^@^A^@^@A^H^A^@^@^H^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^C@^@^@^B^@^@ ^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^^C^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^H ^@^H^@^H^@^@^@^@^@^H@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@▒▒^@^@^@^@^@^@^@^@^H^@^@^@^H^H^@^@^@^A^H^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^A^@^@^@^@^@^@^@^A^@^@^A@^@^@^@^@^A^@^@^@ ^@^@^@^@^@^@^@^@^@^@^H^@^H^P^@@^@^H^@^@^H^@^H^@^@(^@^@^@^@^@^@^@^A^@^@▒ ^@^@^H▒^@^@^@^@^H^@^@^@^@^H^H^@^@@^@^@^@^@^H^B^@^@^@^@^@^@^P^@^@^H^@^@^@^H^@  ^@^@^@^@^H^@^@^@^P^B^@^H^A^@^@^@^@^H^@^@^@^@^@^@^@^H^@^@^H▒^@^@^@^@^H^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^C^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@@▒^@^H^@^@^@^@^H^@ ^@^@^@^@^@^@^@^@^@@^@^@^P^@^@^@^@^@^@^@^L^@^@^@^@^@^@^@^@^A^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@@▒^@^A^@^A^@@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^H^@@^B^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@!^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^H^H^@^@^H^H ^@^@@^@^@^A^@^@^@^@^H^H^@^H
    ^@^H^B^@^@^H ^@^@^@^H^@^@^@^H^@^@^@^@^H^H^@^@^H^@^@^@@^@^@ ^@^@^H^H^@^P^@^@^A^@^@^A^@ ^@^@^@^P^A^@^@^H^@@^@^@^@^@ ^@^@^H^@^H^@^@(^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^A^@^@^A^L^A^@^@^@^@^@^@^@^@^@^A^@^A@^@^@^@^@@^@^@@^@^@^A^@^P^@^A@^@^@▒^A^A^@^@^H^@^@^@^@(^@^@(^@^A▒^@^H^@^@^@
    ^H^@^@^@^@^H^@^@^H^@
    ^@^@^@^@^@^@^@^@^@^@^@^@^BB^@^@^@^@^@^H▒^@^H ^@^H^H^@^@^@^@^@^P^@^@(^A^P^@^@^@^@^@^@^@^@^@^H^@^@^H^@^@ ^@^@^@^@^@^@^@^@@^@^@^@^@^H^H^@^@^@^H^H^@^@^@^@^@^@^@^@^A^@^@^H ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^P^@^H^@^H^@^@^@^@^@^@^@^A^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^P^@^@^@^@^H^@^A^H^@^@^@^A^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@▒^P^B^@^@^A^@^H^@^@^H^H▒^@^@ ^@^@(^@^H^H^@^@^@^@^@^@^@^@^@^@^@^A^@   ^@^@^A^@^@^@^A^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^B^@^A^@^A^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^A^@^@^@^@^@^@ ^@^@^@^@^@^@@^@^@^H^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^A^@^@^@^@P^@^@^@^@^@^@^A^@^@^A^@▒^@^@A^@^@^@^@^@^A^@^A^@▒^@^@A^@^A^@^A^A^@^@^@^@^@^A@^A^@^H^A^@^A ^@^A^P^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^H^@^@^@^^C^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^A^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@!^@^@^@^@^@^@^@▒▒@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^H^A^@^@^P^@^@^@^H^B▒^P^@^@^@^@^@^@^H^@@^B^@^H^@^@^H^@^@^@^@^@^@^@ ^@^@ ^@^@^@^@^@^@^@^@^@^H^H^@^@^@^A@^@^H^@^@^@^@^@  ^@^@^@^@^@^@^H^@^H^@^H^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^A^H^@^@^A ^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^H^@^@^@^@^@^@^@^B^@^P   ▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^H^@^@!^P^@^B^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^B^H^@^@^@^@^@^@^@@^@^@^@^@^@^@^B^H^@^@^A^@^@^@H^@^@^@^@^@^@^H^@^@^@^@^H^@^A^H^@^@^@^@^@^@^@^@^@^@^@^@$^@@B^@^@^@^B^@^@^@^@@^@^@^@^@^@^@^@^@^@▒^@^A^H^H^@^A^@^@^@^@^@^@^@^@^@^@^@^@@^@ ^@^L^H^@^H^@(^@^H^A@^@^@^@^@^@^@^@^@^@^@H^@^@^@^A^@^B^@^B^H^H^@^@^@^@^H^H^@^H^@^H▒^@^@^H^@D^@^@^@^@^@^@A@^@^A@^@^A^P@^@ ^@^@^@^@^@^@^@^@^@^A^H^@▒^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^H^@@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^H^@^@^@^@^@^@^@^@^@^@^@^@^@@@^@^@^@^@^B^@^@^@^A^@^A^@^A^@^@^@^@^@^@^@^@^@^C^@^@^A^@^@@^@ ^@^@^@^@^@^@^@@^@^A^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^A^@^P^@▒^@^@^@^@^@@^C^@^A ^A@^@^@^@^@^@^@^@^H^@@^@^H^@@^H^@@ ^@ ^B^@A^@@^A^@^@▒^@^@^A^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@  ^A^@^@^@^@^@^B ^@^@^@^@^@@^@^@^A^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^H^@^@^@^@^@^@^@^@^B^H^@^@^@^@^@^B^H^@@^@^@^@^@^@^@^@^@^@^@^@^@^@▒^@^@^@^@^H
    ^@^@^@^@^@^@^@^@^@^@^B^H^@^@^@^@^@@^B^@^@^@^@^@^@^@^@^@^@^@@^@^@^H^@^@^@^@^@^A^@^@^@^@^@^@^H^B^@^@^@^@@^@^@▒^@^@ ^@^@^@^@^@^@^@^A^@^H^@^H^@^H^@^@ ^@^@^@^@^@^@^@@^@^@@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^H^A^@^@^@^@^@^@@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@[    3.964307] random: nonblocking pool is initialized
    ^C^A^@^@^@^@▒@^A^C^A^@^@^@A^H^B^@^@^@^@^B^@^@^@^@^H^@^A@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@@^H^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^B@^@^@ ^@^B^@^@^@^@^@▒^@^@^@^@^@^@^@@^@^B^@^@^@^@^@[    4.191517] usbcore: registered new interface driver usbfs
    [    4.197174] usbcore: registered new interface driver hub
    [    4.202765] usbcore: registered new device driver usb
    ^@^@^@^@^@^@^@^@^@^@^@^@^B@@^@[    4.214590] exFAT: Version 1.2.9
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@ ^H^A^@^@^@^@^@^@^@^@[    4.258812] SCSI subsystem initialized
    ^@^@^@^@^@^@^@@^@@^@^@^@@^@[    4.269684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ^@^@[    4.277921] ehci-platform: EHCI generic platform driver
    [    4.293597] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
    [    4.300440] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
    [    4.305771] ehci-platform 101c0000.ehci: EHCI Host Controller
    [    4.311646] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
    [    4.319836] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
    [    4.326144] ttyS0: 1 input overrun(s)
    ^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    4.338493] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
    [    4.345967] hub 1-0:1.0: USB hub found
    ^@^@^@^@^@^@^@^@[    4.350368] hub 1-0:1.0: 1 port detected
    ^@^@^@^@[    4.360813] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ^B^@^@^@^@^@^@^@^@[    4.368777] ohci-platform: OHCI generic platform driver
    [    4.374348] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
    [    4.381361] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
    [    4.389489] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
    ^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    4.453625] hub 2-0:1.0: USB hub found
    [    4.457869] hub 2-0:1.0: 1 port detected
    ^@^@^@^@^@^@^@^@^@^@^@^@^@[    4.475333] MTK MSDC device init.
    ^@^@^@^@^@^@@^@^@^@^@[    4.518624] mtk-sd: MediaTek MT6575 MSDC Driver
    [    4.526583] sdhci: Secure Digital Host Controller Interface driver
    [    4.532932] sdhci: Copyright(c) Pierre Ossman
    [    4.538863] sdhci-pltfm: SDHCI platform and OF driver helper
    [    4.549261] usbcore: registered new interface driver usb-storage
    [    4.565885] init: - preinit -
    ^@^@^@^@^@^@    ^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^H^@  @^@^H^@^@^H^@^@^@^H^@^@ ^@^@^@^H^@^@^@ ^P@^@^@^@ @^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^HP^H
    @^B^@^@^@^@^@^H^@^@^@^@P^@^@^@^@^@ ^@^H^@^H^@^H^@^@^@^@^@ ^H^A^@^@^H^@^@^@ ^A^@^P^@^@^@^@^@^@ ^A^@^@^H^@ ^B^@^@^A^@^@^@^@^@^@^@^H^@^@^H^@@^@▒^@^@^@^@^@^@^@^@^@^@^@@^@^A(^@^A ^@^@^@^H^@^H^@^@^@^@^H^@^@^H@^@(^@ ^@^@^@^@^@^@@^H^@^H^@@^@@^H^@^@^@^@^H^H^@^@^@^@^@^@^H^H^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^H^@P^@^@^H▒^A^@^H^@^@^@^@@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^C^@^A^@^@^A^@^B^@^B^@^@^@^@^A^@^@^@^@▒^@^@^@^@^@^@^@^@^A^@^A^@^A^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    5.364356] rt3050-esw 10110000.esw: link changed 0x00
    ^@^@    ^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^B^@^@^@^@^@^@^@^H^@^H^@^@^@^@^@^@^@^@^@^@ ^B^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@      ^@^@^B^@^@^H$^@^@^@^@^@^@^B^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@$^@^@^@^@ ^@^@^@^@^@^@^@^B^@^@Press the [f] key and hit [enter] to enter failsafe mode
    Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^P^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A ^@^@^@^@^@▒ ^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@(^@^@^@^@^@^@^@^@^@^@^H^H^@^@^@^@^@^H@^@^@^@^A^@^@^@^H^@^@(^@^@^H^@^@^@^@@^@^@^@^@^@^H^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^C^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@`^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^A^H^@^@^@^@^@^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^P^@^@^@^@^@^@^A^@^@^A^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^R
    ^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@`^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^A^H^@^@^@^@^@^@▒^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^P^@^@^@^@^@^@^A^@^@^A^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@H^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^H^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@     ^@^@^@^@^@^@^@^[    8.941307] jffs2: notice: (393) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    @^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^[    8.960593] mount_root: switching to jffs2 overlay
    @^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    8.975913] urandom-seed: Seeding with /etc/urandom.seed
    ^@^@^@^@^@^@ ^@^@^@^@^@^@^A ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^C^@^@^A^@^@^A^@^@^@^@^@^@^H^@@^@^@^@@^H^@^H^P^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    9.080430] procd: - early -
    [    9.083462] procd: - watchdog -
    ^@^@@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^P^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@^@^@
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@[    9.737715] procd: - ubus -
    ^@^B ^@^@^A^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^H^@^@^@^@^@[    9.953928] procd: - init -
    ^@^@^@^@^@^@^@^@▒^@Please press Enter to activate this console.
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^H^@^@^@^@^H^H^@@^@^@^@^@^H^@^@^@^@^@^@^@^@^@ ^@^A^@^@^@^@^@^@^@^@^@^@^@^@ @^@^@@@^@^@^@^@^@^@^@^@^@^H^@^H^@^@^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A^@^@▒^@^@^@^@!^@^@^@^@^@^@^@^B^@@^@@^@^@^A^H^A^A^@^@^@^@^@^@^@^@^H^H^@^@^H^@^@^@^@^@^B^@^H^@^@ ^@^@^@^@^@^@^@^@^@^H^@^@^@^H^@^@^H^H^@^@^H^H^@^H^@^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^B^@^H^@^@^@^@^@^@
    
    ^@^@^@^@^P^@^@^BBusyBox v1.25.1 () built-in shell (ash)
    
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^@^@^@   ____       _             ____
      / __ \___  (_)__  ___    / __ \__ _  ___ ___ ____ _
     / /_/ / _ \/ / _ \/ _ \  / /_/ /  ' \/ -_) _ `/ _ `/
     \____/_//_/_/\___/_//_/  \____/_/_/_/\__/\_, /\_,_/
     W H A T  W I L L  Y O U  I N V E N T ? /___/
     -----------------------------------------------------```




Looks like your connection to Community was lost, please wait while we try to reconnect.