Re-Booting Issue with Omega 2+ LTE - Need Assistance
-
@Lazar-Demin I am trying to use the ethernet web recovery option. I do not understand the instructions in the documentation. I am confused about the sequence of plugging the ethernet cable into my PC and then creating the IPV4 point. I note that the cable should not be plugged into the Omega 2+LTE initially, but if this is the case then how do i Create a new local access point for the device? Please excuse the ignorance as I am not well versed with configuring the LAN details.
This is my boot sequence which seems to indicate that the device found and initialized the eth adaptor??
Just curious why there is not 'Undefined Network' showing ????
-
All solved... No need for assistance... thanks
-
@MickB Could you post the solution for your issue? Just to help future users who may encounter the same thing
-
@Lazar-Demin I followed your instructions using an ETH cable and then used option [0] : Web recovery mode
-
I am having the same problem but the web portal isn't accepting the firmware. For reference the logs are the same but when I upload the firmware in the web portal it says: Loading: ### Error: couldn't find start of data in next packet!
-
@thomas166 which binary are you using? Did you try downloading it again and re-trying?
-
@MickB I tried several different versions. For the omega2lte I tried version omega2lte-v0.3.3-b251.bin, omega2lte-v0.3.4-b257.bin. I even tried the one in the web recovery article for the omega2: omega2-v0.3.2-b235.bin. And yes, I redownloaded several times. I was using this url for the binaries btw: http://repo.onioniot.com/omega2/images/
I also tried uploading a new uboot binary and they all give that same error for some reason. I choose the file, hit upload and the console just prints: Loading: ### Error: couldn't find start of data in next packet!.
Not sure why it's doing this but now I have 3 omega2lte devices that are bricked.
-
@MickB please post the boot log for the device(s) that are "bricked"
-
@crispyoz I do not have any devices that are bricked
-
just a PSA for future users encountering similar issues: @thomas166 found a solution to his issue - see this post
