Omega 2S+ Image Size

crispyoz

@matiaslao Do you have an Omega2S+ or an Omega2S? If you have 32mb flash then it means you have a 2S+, so when build your firmware ensure you select Omega2S+ then your image can be up to 32MB

matiaslao

Hi @crispyoz. It's an Omega2S+.

In the OpenWRT configuration, I've selected Multiple Devices in the Target Profile menu and then Onion Omega2 Pro in the Target Devices menu. BTW, if we select Onion Omega2 Pro in the Target Profile menu, image was not being built correctly.

Best regards,
Matias

Lazar Demin

@matiaslao Ah looks like there's a typo in the Omega2 Pro device tree specification file. That's why the build system thinks only 16MB are available.

We'll look into fixing that and will let you know!

matiaslao

Awesome, thank you @Lazar-Demin! I'll be waiting for your updated status so I can give it a try.

Best regards,
Matias

Lazar Demin

@matiaslao the fix has been added to https://github.com/OnionIoT/source (and firmware v0.3.4 b258 has been released with this fix).

If you're working on with a local copy of the https://github.com/OnionIoT/source repo, you will need to do a pull to get the DTS changes.

If you've been compiling with this build system already, you'll also need to remove the tmp directory for the DTS changes to take effect (if I remember correctly)

Let me know how it goes!

matiaslao

Hi @Lazar-Demin, I've cloned the repo to start from scratch and make sure the latest commit was being used from https://github.com/OnionIoT/source (and also for the new DTS to take effect).
I'm still observing the same issue. Please let me know if there is any extra infromation I can provide you. I'm including below the output for the make command, where the error is raised.

Image Name:   MIPS OpenWrt Linux-4.14.81
Created:      Thu Feb 15 20:37:21 2024
Image Type:   MIPS Linux Kernel Image (lzma compressed)
Data Size:    1617556 Bytes = 1579.64 KiB = 1.54 MiB
Load Address: 80000000
Entry Point:  80000000
mv /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/omega2pro-kernel.bin.new /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/omega2pro-kernel.bin
[ -f /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/omega2pro-kernel.bin -a -f /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/root.squashfs ]
dd if=/home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/omega2pro-kernel.bin >> /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin
3159+1 records in
3159+1 records out
1617620 bytes (1.6 MB, 1.5 MiB) copied, 0.0263151 s, 61.5 MB/s
dd if=/home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/root.squashfs >> /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin
31685+1 records in
31685+1 records out
16222728 bytes (16 MB, 15 MiB) copied, 0.25631 s, 63.3 MB/s
/home/user/onion/source/staging_dir/host/bin/padjffs2 /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin  4 8 16 64 128 256
padding image to 01104000
padding image to 01110000
padding image to 01120000
padding image to 01140000
echo '{  "supported_devices":["omega2pro"], "version": { "dist": "OpenWrt", "version": "18.06.1", "revision": "r7501-928cad900f", "board": "ramips" } }' | fwtool -I - /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin
WARNING: Image file /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin is too big
cp /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin /home/user/onion/source/bin/targets/ramips/mt76x8/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin
cp: cannot stat '/home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin': No such file or directory

Best regards,
Matias

crispyoz

@matiaslao Please post each step you are using to build your firmware so we duplicate your issue.

matiaslao

Hi @crispyoz, I'm including below the steps followed to setup the build system and compile it. I started from scratch to make sure that the changes pushed by @Lazar-Demin were included in the build system.

Note: I'm using a Linux System and not the Docker image.

create an onion folder, navigate into it and download the build system from github.

mkdir onion
cd onion
git clone https://github.com/OnionIoT/source.git -b openwrt-18.06
cd source

setup the onion feeds.

sh scripts/onion-feed-setup.sh
python scripts/onion-setup-build.py

update the image configuration. If I manually chose the packages and target (among other options), I run make menuconfig. However, I usually use an already generated .config file, which has a diff format.
```
cp CustomConfig /home/user/onion/source/.config
cd /home/user/onion/source
make defconfig
```
finally, the image is built by running make -j4. If any error is raised, I re run the command with the following syntax to get more information about the error: make -j1 V=s

These bullets summarize the steps followed to build the image. Let me know if there is any way I can share with you the config file.

BTW, when selecting both the Omega2 Pro and the Omega2+ as the Target Devices, binary for Omega2+ is generated but not for the Omega2 Pro. As for the Omega2+, the binary size is 18 MB, and as for the Omega2 Pro, I get the warning message that the image is too big.

Best regards,
Matias

crispyoz

@matiaslao You can paste the CustomConfig to https://paste.mozilla.org/

matiaslao

@crispyoz please find the CustomConfig in the following link. https://paste.mozilla.org/qrMwjsZR

Best regards,
Matias

crispyoz

@matiaslao I built your firmware from scratch using your config file and it completed fine. Have you checked the updated is in place? It's in source/target/linux/ramips/dts/OMEGA2PRO.dts

matiaslao

@crispyoz good to know that it worked for you.

I've checked the source/target/linux/ramips/dts/OMEGA2PRO.dts and it includes the latest modification pushed by @Lazar-Demin to the source repo.

/dts-v1/;

#include "OMEGA2.dtsi"

/ {
        model = "Onion Omega2 Pro";

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
        };

        new-leds {
                compatible = "gpio-leds";

                wifi {
                        label = "omega2pro:blue:wifi";
                        gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
                };
        };
};

&firmware {
        reg = <0x50000 0x1f30000>;
};

&system_led {
        label = "omega2pro:amber:system";
        gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};

&pinctrl {
        state_default: pinctrl0 {
                uart2 {
                        ralink,group = "uart2";
                        ralink,function = "gpio";
                };
        };
};

BTW, I'm sharing with you the content from source/bin/targets/ramips/mt76x8 directory. Does the Omega2+ image build has the same size than the one you built?

user@ML-PC:~/onion/source/bin/targets/ramips/mt76x8$ ls -lh
total 58M
 -rw-r--r-- 1 user user  12K Feb 22 10:45 config.seed
 -rw-r--r-- 1 user user  18M Feb 22 11:17 openwrt-ramips-mt76x8-omega2p-squashfs-sysupgrade.bin
 -rw-r--r-- 1 user user 7.3K Feb 22 11:17 openwrt-ramips-mt76x8.manifest
 -rw-r--r-- 1 user user  41M Feb 22 11:15 openwrt-toolchain-ramips-mt76x8_gcc-7.3.0_musl.Linux-x86_64.tar.bz2
 drwxr-xr-x 1 user user  512 Feb 22 11:18 packages
 -rw-r--r-- 1 user user  429 Feb 22 11:18 sha256sums

Thanks for the support being provided.

Best regards,
Matias

crispyoz

@matiaslao I think I have managed to duplicate your problem, it's not generating the openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin firmware. No error but I only have the issue when using your config. Don't have a lot of time right now but but will try to nail down the cause.

matiaslao

@crispyoz thanks for the update. You're correct. The make command does not return an error. However, after it finishes running openwrt-ramips-mt76x8-omega2p-squashfs-sysupgrade.bin is generated but not openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin.
When looking into the make command output, the messages shown below are the only reference to the Omega2Pro image.

WARNING: Image file /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin is too big
cp /home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin /home/user/onion/source/bin/targets/ramips/mt76x8/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin
cp: cannot stat '/home/user/onion/source/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-omega2pro-squashfs-sysupgrade.bin': No such file or directory

Please let me know if you have any new finding.

Thanks in advance,
Matias

matiaslao

Hi @Lazar-Demin & @crispyoz, I was able to find the root cause for this issue. I've created a pull request in OnionIoT/source github repository with the fix.

Lazar Demin

@matiaslao Good find! I've merged in the PR, thanks!

crispyoz

Good catch @matiaslao !